Skip to the content
2 layers153.6 × 35.9 mmSthymuli cardinalboard.kicad pro, the printed circuit board in 3D

Sthymuli cardinalboard.kicad pro

nathmo/Sthymuli-cardinalboard

companion boardto the sthymuli motherboard

Size
153.6 × 35.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
31
Nets
29
Pads
112
Tracks, vias
560, 76
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
29 Mar 2026
Updated
17 Apr 2026

Overview

Sthymuli cardinalboard.kicad pro is an open-source printed circuit board by nathmo, from the nathmo/Sthymuli-cardinalboard repository on GitHub. It is a 2-layer board of 153.6 × 35.9 mm with 31 parts on 29 nets, routed with 560 tracks and 76 vias.

It is built around the ITR9909, LSM6DS3 and WS2812B, with the NX7002AK among its other parts. Its parts include 7 capacitors, 6 resistors, 6 diodes, 3 ICs and 3 transistors.

Main components

4

README

README.md

Cardinalboard

smaller board that goes with : github.com/nathmo/Sthymuli-motherboard

image Note : the IMU should only be present on one board at a time

Parts

31
QtyValueFootprintReferences
7100nFCapacitor_SMD:C_0402_1005MetricC1, C2, C3, C4, C5, C6, C7
6WS2812BLED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mmD1, D3, D4, D5, D6, D7
2100KResistor_SMD:R_0603_1608MetricR5, R6
227RResistor_SMD:R_0603_1608MetricR3, R4
23K3Resistor_SMD:R_0603_1608MetricR1, R2
2NX7002AKPackage_TO_SOT_SMD:SOT-23Q1, Q2
2SW_Pushsthymuli:XKB5858SW1, SW2
1Battery_Cellsthymuli:Battery_Holder_18650_robopBT1
1Conn_02x08_Counter_ClockwiseConnector_PinSocket_2.54mm:PinSocket_2x08_P2.54mm_Vertical_SMDJ1
1ITR9909sthymuli:ITR_9909_VerticalU2
1ITR9909sthymuli:ITR_9909_HorizontalU1
1LOGOLOGOG***
1LSM6DS3Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4yU3
1Q_PMOS_GSDPackage_TO_SOT_SMD:TSOT-23Q3

The 30 most common of 31 parts.

Similar boards

  • 4 layers117 × 107 mmMainboard dual battery, the printed circuit board in 3D

    Mainboard dual battery

    shurik179/yozh

    Small robot based on Pololu's Zumo chassis but programmable in CircuitPython

    121 parts8MIT
  • 2 layers275 × 200 mmMidi grid, the printed circuit board in 3D

    Midi grid

    zukaitis/midi-grid

    DIY midi controller project

    328 parts92
  • 4 layers80 × 72 mmPH ORP Card, the printed circuit board in 3D

    PH ORP Card

    brandtks/AquaPicModules

    AquaPic modules, board design and firmware

    118 parts2
  • 4 layers97 × 78 mmPUTM EV Frontbox 2023, the printed circuit board in 3D

    PUTM EV Frontbox 2023

    PUT-Motorsport/PUTM_EV_FRONTBOX

    PCB board aquiring data from the front side of the vehicle

    322 partsMIT
  • 4 layers85.7 × 73.9 mmLAITS HW, the printed circuit board in 3D

    LAITS HW

    tollsimy/LAITS-HW

    LAITS Hardware Repo

    200 parts
  • 2 layers41 × 60.5 mmAx chip, the printed circuit board in 3D

    Ax chip

    richardeoin/ax

    This repository contains hardware and software for the AX5043 and AX5243 radios from AxSemi (now ON Semiconductor). They are probably the same die, but the AX5243 has fewer pins.

    76 parts48
  • 2 layers50 × 34 mmAccess, the printed circuit board in 3D

    Access

    kitspace-test-repos/kicad6-file-collection

    66 partsMIT

Questions

How big is the Sthymuli cardinalboard.kicad pro PCB?

It measures 153.6 × 35.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Sthymuli cardinalboard.kicad pro use?

31 parts, built around the ITR9909, LSM6DS3, WS2812B and NX7002AK. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Sthymuli cardinalboard.kicad pro KiCad files?

From the nathmo/Sthymuli-cardinalboard repository on GitHub, at the commit this page was made from: the board is Sthymuli-cardinalboard.kicad_pro.kicad_pcb and its schematic Sthymuli-cardinalboard.kicad_pro.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Sthymuli cardinalboard.kicad pro design in my own project?

Its repository states no licence, so its author keeps all rights: ask nathmo before reusing the design.