

Midi grid
DIY midi controller project
- Size
- 275 × 200 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 328
- Nets
- 226
- Pads
- 3,341
- Tracks, vias
- 4,173, 540
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 10 Jan 2018
- Updated
- 4 Jan 2025
Overview
Midi grid is an open-source printed circuit board by zukaitis, from the zukaitis/midi-grid repository on GitHub. It is a 2-layer board of 275 × 200 mm with 328 parts on 226 nets, routed with 4,173 tracks and 540 vias.
It is built around the STM32F411RCT6, 74HC138 and USBUF02W6, with the VO617A, LL4148 and BSH205G2 among its other parts. Its parts include 158 diodes, 65 resistors, 34 transistors, 26 switches and 21 capacitors. It belongs with the audio and music and lEDs and displays boards and the STM32 boards of this library.
Main components
8STM32F411RCT6
LQFP-64(10x10)-40℃~+85℃ 1.7V~3.6V 100MHz 128KB 12bit 256KB 32 Bit 50 ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)74HC138
SOP-160℃~+70℃ 24ns@5.0V,16pF 2V~6V 3/8 5.2mA 5.2mA 5uA 74HC Decoder Reverse function Single Supply SOP-16 Signal Switches, Multiplexers, Decoders ROHSGRSignal Switches, Multiplexers, DecodersUSBUF02W6
SOT323-6L-40℃~+125℃ 22Ω 47pF Yes SOT323-6L EMI/RFI Filters (LC, RC Networks) ROHSSTMicroelectronicsEMI/RFI Filters (LC, RC Networks)VO617A
DIP-4-55℃~+110℃ 1 1.35V 15us 250mV@5mA,1mA 2us 5.3kV 50% 50mA 600% 60mA 6V 80V DC Phototransistor DIP-4 Transistor, Photovoltaic Output Optoisolators ROHSVishay IntertechnologyTransistor, Photovoltaic Output OptoisolatorsLL4148
LL-341 Independent 1V@10mA 200mA 4A 4ns 500mW 5uA@75V 75V LL-34 Switching Diodes ROHSMDDSwitching DiodesBSH205G2
-- MOSFETs ROHSNexperiaMOSFETsNX7002AK
SOT-23-55℃~+150℃ 1 N-channel 1.33W 2.1V 20pF 300mA 4.5Ω@10V 430pC@4.5V 60V N-Channel SOT-23 MOSFETs ROHSNexperiaMOSFETsEC12E24204A9
插件插件 Rotary Encoders ROHSALPSALPINERotary Encoders
README
Hardware/README.mdBill of Materials
| Reference | Quantity | Part number | Description | Catalog link |
|---|---|---|---|---|
| A1 | 1 | Nokia 5110 LCD | LCD module, ILI9341 controller, TFT LCD Display, 9-pin breakout PCB, SPI interface, 5V/3.3V | https://www.ebay.com/itm/84-48-LCD-Module-White-Backlight-Adapter-PCB-for-Nokia-5110-Arduino/400488314619 |
| C3, C2, C1, C6, C7, C8, C9, C11, C13, C17 | 10 | Capacitor MLCC, 100nF +/-10%, 6.3V, 0603, X5R | ||
| C12, C10, C4, C5 | 4 | Capacitor MLCC, 2.2uF +/-10%, 6.3V, 0603, X5R | ||
| C14, C15 | 2 | Capacitor MLCC, 27pF +/-10%, 6.3V, 0603, C0G | ||
| C16, C18, C19, C21, C20 | 5 | Capacitor MLCC, 10uF +/-10%, 6.3V, 1206, X5R | ||
| D1, D3, D5, D7, D9, D11, D13, D15, D17, D19, D21, D23, D25, D27, D29, D31, D33, D35, D37, D39, D41, D43, D45, D47, D49, D51, D53, D55, D57, D59, D61, D63, D65, D67, D69, D71, D73, D75, D77, D79, D81, D83, D85, D87, D89, D91, D93, D95, D97, D99, D101, D103, D105, D107, D109, D111, D113, D115, D117, D119, D121, D123, D125, D127, D129, D132, D136, D140, D142, D148, D150, D156, D134, D144, D152, D146, D154 | 77 | RGB LED, TH, d=5mm, p=1.27mm, common anode, diffused, pinout: RAGB | https://www.ebay.com/itm/100pcs-x-5mm-RGB-LED-Common-Cathode-Tri-Color-Emitting-Diodes-Diffused/291498456335 | |
| D2, D4, D6, D8, D10, D12, D14, D16, D18, D20, D22, D24, D26, D28, D30, D32, D34, D36, D38, D40, D42, D44, D46, D48, D50, D52, D54, D56, D58, D60, D62, D64, D66, D68, D70, D72, D74, D76, D78, D80, D82, D84, D86, D88, D90, D92, D94, D96, D98, D100, D102, D104, D106, D108, D110, D112, D114, D116, D118, D120, D122, D124, D126, D128, D130, D133, D137, D141, D143, D149, D151, D157, D131, D135, D138, D139, D145, D153, D147, D155, D158 | 81 | LL4148-GS08 | 100V 0.3A standard switching diode, MiniMELF | https://www.tme.eu/en/details/ll4148-gs08/smd-universal-diodes/vishay/ |
| F1 | 1 | 1206L050YR | Polyfuse, 6V, 500mA, 1206 | https://eu.mouser.com/productdetail/?qs=PWhpLWeW8wckT8hV5jLiAA%3D%3D |
| J1 | 1 | 105017-0001 | Connector, Micro USB | https://www.lemona.lt/?page=item&i_id=216110 |
| J2, J3 | 2 | FC68133 | 3-pin audio jack receptable (stereo/TRS connector) with 2 switching contacts | http://lt.farnell.com/cliff-electronic-components/fc68133/stereo-jack-3-5mm-5pos-pcb/dp/2518190 |
| J4 | 1 | 22-27-2041 | Generic connector, single row, 01x04 | |
| Q2, Q1, Q4, Q3, Q6, Q5, Q8, Q7, Q10, Q9, Q12, Q11, Q14, Q13, Q16, Q15, Q18, Q17, Q20, Q19 | 20 | BSH205G2 | MOSFET, P Channel, -2 A, -20 V, SOT-23 | http://uk.farnell.com/nexperia/bsh205g2/mosfet-p-ch-20v-2a-to236ab/dp/2498570 |
| Q28, Q27, Q26, Q25, Q32, Q31, Q30, Q29, Q24, Q23, Q22, Q21, Q33, Q34 | 14 | NX7002AK | MOSFET, N-Channel, 190 mA, 60 V, SOT-23 | http://uk.farnell.com/nexperia/nx7002ak/mosfet-single-n-ch-60v-0-19a-sot23/dp/2191746 |
| R21, R22, R23, R24, R64 | 5 | Resistor, 1K +/-5%, 0603 | ||
| R28, R27, R26, R25 | 4 | Resistor, 249R +/-1%, 1206 | ||
| R36, R35, R34, R33 | 4 | Resistor, 294R +/-1%, 1206 | ||
| R44, R43, R42, R41 | 4 | Resistor, 51R +/-1%, 1206 | ||
| R40, R39, R38, R37, R48, R47, R46, R45, R32, R31, R30, R29, R1, R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R52, R51, R50, R49, R53, R54, R55, R59, R56, R63 | 42 | Resistor, 10K +/-5% 0603 | ||
| R57, R58, R61, R60, R62 | 5 | Resistor, 220R +/-5%, 0603 | ||
| R65 | 1 | Resistor, 1.6K +/-5%, 0603 | ||
| SW1, SW2, SW3, SW4 | 4 | 4 x 4 silicone push button matrix, button size: 15mm x 15mm, matrix size 100mm x 100mm | http://www.better-silicone.com/Translucent-Silicone-Rubber-Button-Pad-4x4-Keyboard-pd847135.html | |
| SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW23, SW24 | 18 | Tactile switch with stem for cap, 12mm x 12mm, h=7.3mm | https://www.ebay.com/itm/25PCS-12x12x7-3mm-Tact-Tactile-Push-Button-Momentary-SMD-PCB-Switch-with-Cap/382202288162 | |
| 17 | Button cap, round, d=12mm, black | |||
| 1 | Button cap, round, d=12mm, red | |||
| SW21, SW22 | 2 | Tactile switch, 6mm x 6mm, h=4.3mm | ||
| SW25, SW26 | 2 | EC12E24204A9 | Rotary encoder, incremental, 24 pulses/revolution | |
| U1 | 1 | STM32F411RCT6 | Microcontroller, ARM Cortex-M4, LQFP64, Flash: 256KB Ram: 128KB,100MHz Voltage: 1.7..3.6V IO-pins: 50 | |
| U4, U3, U2 | 3 | SN74HC138PW | Decoder 3 to 8 (active low outputs), TSSOP-16 | http://uk.farnell.com/texas-instruments/sn74hc138pw/ic-decoder-demux-smd/dp/9591095 |
| U5 | 1 | USBUF02W6 | 2-line EMI filter and ESD protection with R pull-up, for USB interfaces, SOT-363 | http://uk.farnell.com/stmicroelectronics/usbuf02w6/filter-low-pass-1ghz-sot-323-6/dp/2341659 |
| U6 | 1 | VO617A | Optocoupler, SO-4 | https://eu.mouser.com/ProductDetail/Vishay-Semiconductors/VO617A-8X017T?qs=%2fha2pyFaduga7JDI9Y4HlZSPCPCm8mReb3LRegGLigzOqtsvsZdCeQ%3d%3d |
| U7 | 1 | LD1117STR | 800mA Low-Dropout Linear Regulator, adjustable output, SOT-223 | http://uk.farnell.com/stmicroelectronics/ld1117str/ic-v-reg-adj-1-25-15v-smd-1117/dp/1202824 |
| Y1 | 1 | ABM3B-8.000MHZ-B2-T | Crystal 8.0MHz 18pf 20ppm -20C +70C | https://eu.mouser.com/ProductDetail/?qs=NE97hfUNX0Ef9OqIOqO2cA%3D%3D |
| 71 | Standoff, M2 * 5mm | https://www.ebay.com/itm/KNURLED-BRASS-SPACER-FEMALE-FEMALE-SCREW-PC-MOTHERBOARD-STANDOFF-M2-X-3MM-25MM-/122039617381 | ||
| 64 | Phillips screw, round head, M2 * 6mm | https://www.ebay.com/itm/M2-A2-304-Stainless-Steel-Phillips-Round-Head-Pan-Head-Screws-Bolts-M2-3-M2-60-/122691038427 | ||
| 23 | Phillips screw, flat head, M2 * 5mm | https://www.ebay.com/itm/M2-A2-304-Stainless-Steel-Phillips-Flat-Head-Screws-Bolts-M2-3mm-M2-60mm-/122689688965 |
Parts
328| Qty | Value | Footprint | References |
|---|---|---|---|
| 81 | LL4148 | project_library:D_MiniMELF | D10, D12, D100, D102, D104, D106, D108, D110, D112, D114, D116, D118, D120, D122, D124, D126 +65 |
| 64 | LED_RAGB | project_library:LED_D5.0mm-4 | D1, D11, D101, D103, D105, D107, D109, D111, D113, D115, D117, D119, D121, D123, D125, D127 +48 |
| 42 | 10K | project_library:R_0603 | R1, R2, R3, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R29, R30 +26 |
| 20 | BSH205G2 | project_library:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18, Q19, Q20 +4 |
| 14 | NX7002AK | project_library:SOT-23 | Q21, Q22, Q23, Q24, Q25, Q26, Q27, Q28, Q29, Q30, Q31, Q32, Q33, Q34 |
| 14 | SW_Push | project_library:Tactile_switch_12x12 | SW5, SW7, SW10, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW23, SW24 |
| 13 | LED_RAGB | project_library:LED_D5.0mm-4-4mm_standoff | D129, D132, D134, D136, D140, D142, D144, D146, D148, D150, D152, D154, D156 |
| 10 | 100nF | project_library:C_0603 | C1, C2, C3, C6, C7, C8, C9, C11, C13, C17 |
| 5 | 10uF | project_library:C_1206 | C16, C18, C19, C20, C21 |
| 5 | 1K | project_library:R_0603 | R21, R22, R23, R24, R64 |
| 5 | 220R | project_library:R_0603 | R57, R58, R60, R61, R62 |
| 4 | 2.2uF | project_library:C_0603 | C4, C5, C10, C12 |
| 4 | 249R | project_library:R_1206 | R25, R26, R27, R28 |
| 4 | 294R | project_library:R_1206 | R33, R34, R35, R36 |
| 4 | 51R | project_library:R_1206 | R41, R42, R43, R44 |
| 4 | Button_matrix_4x4 | project_library:4x4_silicone_button_matrix | SW1, SW2, SW3, SW4 |
| 4 | SW_Push | project_library:Tactile_switch_12x12_no_holes | SW6, SW8, SW9, SW11 |
| 3 | 74HC138 | project_library:TSSOP-16_4.4x5mm_Pitch0.65mm | U2, U3, U4 |
| 3 | Mounting_hole | project_library:MountingHole_2.2mm_M2 | M1, M2, M3 |
| 3 | TEST | project_library:Test_Point_Pad_d3.0mm | TP1, TP2, TP4 |
| 2 | 27pF | project_library:C_0603 | C14, C15 |
| 2 | 3.5mm jack | project_library:3.5mm-jack | J2, J3 |
| 2 | EC12E24204A9 | project_library:EC12 | SW25, SW26 |
| 2 | SW_Push | project_library:SW_SPST_PTS645 | SW21, SW22 |
| 1 | 1.6K | project_library:R_0603 | R65 |
| 1 | 8MHz | project_library:Oscillator_SMD_EuroQuartz_XO53-4pin_5.0x3.2mm_HandSoldering | Y1 |
| 1 | Conn_01x04_Male | project_library:Molex_KK-6410-04_04x2.54mm_Straight | J4 |
| 1 | Kicad | project_library:Symbol_KiCAD-Logo_CopperAndSilkScreenTop | GR3 |
| 1 | LD1117STR | project_library:SOT-223-3Lead_TabPin2 | U7 |
| 1 | Nokia 5110 LCD | project_library:Nokia_5110_lcd | A1 |
| 1 | OSHW | project_library:Logo_OSHW | GR1 |
| 1 | Polyfuse | project_library:R_1206 | F1 |
| 1 | QR | project_library:qr_url | GR2 |
| 1 | STM32F411RCT6 | project_library:LQFP-64_10x10mm_Pitch0.5mm | U1 |
| 1 | USB | project_library:usb_logo_6x3mm | GR4 |
| 1 | USBUF02W6 | project_library:SOT-363_SC-70-6 | U5 |
| 1 | USB_OTG | project_library:USB_Micro-B_Molex-105017-0001 | J1 |
| 1 | VO617A | project_library:DIP4-smd | U6 |
Similar boards
- 2 layers115 × 80 mm

- 2 layers141.8 × 50 mm

Cwl
philipparndt/opentherm-wolf-cwl
Decoder tool for analyzing OpenTherm protocol communication between a BM remote control and a Wolf CWL ventilation/heat-recovery unit. Built to reverse-engineer the protocol for building a custom ESP32-based controller.
63 parts - 2 layers80 × 50 mm

Eink clock
kaini/eink-clock
Source code and schematics for a clock using the ED060SC4 E-Ink display
81 parts11MIT - 2 layers87.6 × 83.8 mm

ENEL200Group01
cva68/ESPBreadboardRobot
Peripheral and breakout board for the ESP-32, with firmware designed for use with Microsoft MakeCode
88 parts2MIT - 6 layers54.1 × 45.1 mm

USB PD
Cuprum77/PD2Breadboard
RP2040 USB PD negotiator with onboard power measuring capabilities and advanced software for power monitoring and optimization.
94 parts5 - 2 layers100 × 50 mm

Reflow Oven
Cuprum77/ReflowController
Simple RP2040 based reflow oven controller (Work in Progress)
84 parts3CERN-OHL-S-2.0 - 2 layers185 × 160.2 mm

- 2 layers99.5 × 70 mm

Breakout 1
Cuprum77/LCD_Driver
FPGA based LCD driver for cheap ST7701S displays
91 parts2CERN-OHL-S-2.0
Questions
How big is the Midi grid PCB?
It measures 275 × 200 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Midi grid use?
328 parts, built around the STM32F411RCT6, 74HC138, USBUF02W6 and VO617A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Midi grid KiCad files?
From the zukaitis/midi-grid repository on GitHub, at the commit this page was made from: the board is Hardware/midi_grid.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Midi grid design in my own project?
Its repository states no licence, so its author keeps all rights: ask zukaitis before reusing the design.