Skip to the content
2 layers79.5 × 59.5 mmProject Design, the printed circuit board in 3D

EEE3088F Design

Size
79.5 × 59.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
61
Nets
74
Pads
236
Tracks, vias
745, 73
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
19 Mar 2025
Updated
24 May 2025

Overview

Project Design is an open-source printed circuit board by KutlwanoP555, from the KutlwanoP555/3088-Project-Design repository on GitHub. It is a 2-layer board of 79.5 × 59.5 mm with 61 parts on 74 nets, routed with 745 tracks and 73 vias.

It is built around the DRV8833PWP, TPS613222ADBV and TPS22918TDBVRQ1, with the AP2112K-3.3 and HUSB237-AA001-DN06R among its other parts. Its parts include 21 capacitors, 16 resistors, 10 ICs, 2 connectors and 1 transistor.

Main components

5

README

README.md

**** Repository for a power subsystem****

Group 127 EEE3088F Design principles

⚡ Micro-Mouse Power Subsystem

This repository documents the design of a Power Subsystem for the Micro-Mouse (MM) project. The power subsystem is responsible for delivering regulated power to all components of the micro-mouse.

📋 System Requirements

To meet the course requirements, the power subsystem must achieve the following:

  • ✅ Drive up to 4 motors bidirectionally, using the assigned pins.
    • 2x brushed DC motors (200 mA each)
    • 2x auxiliary motors (500 mA each)
  • ✅ Integrate an INA219 for battery monitoring via I²C.
    • A0 and A1 pins must not both be tied to GND.
  • ✅ Charge the battery from a 9V input source.
  • ✅ Support two charging modes:
    • Low current: 200 mA
    • High current: 600 mA ±100 mA (from the battery's perspective)
  • ✅ Integrate USB-C and negotiate a 9V supply from a USB host.
  • ✅ Provide 2x external load switches:
    • Must support 1 A each, with high-side connection to 5V.
  • ✅ Provide regulated 3.3V and 5V outputs:
    • 3.3V @ 300 mA max ±5% accuracy
    • 5V @ 1.5 A max ±5% accuracy
  • ✅ Include an ON/OFF switch:
    • OFF: Leakage current < 30 μA
    • ON: Must handle up to 2 A peak current
    • Must shut down both 5V and 3.3V rails

Parts

61
QtyValueFootprintReferences
91uFCapacitor_SMD:C_1206_3216MetricC8, C10, C11, C12, C16, C17, C23, C24, C25
6TestPoint_SmallTestPoint:TestPoint_Pad_1.0x1.0mmTP26, TP29, TP30, TP36, TP37, TP38
510uFCapacitor_SMD:C_1206_3216MetricC3, C6, C9, C13, C19
362RResistor_SMD:R_0603_1608MetricR11, R13, R16
3TPS22918TDBVRQ1Library:SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BRU3, U5, U7
20.01uFCapacitor_SMD:C_1206_3216MetricC1, C4
20.4RResistor_SMD:R_0603_1608MetricR6, R7
21RResistor_SMD:R_0603_1608MetricR3, R4
21kResistor_SMD:R_1206_3216MetricR1, R19
22.2uFCapacitor_SMD:C_1206_3216MetricC2, C5
24.7uFCapacitor_SMD:C_1206_3216MetricC21, C22
247KResistor_SMD:R_0603_1608MetricR5, R8
25R2Resistor_SMD:R_0603_1608MetricR12, R14
2DRV8833PWPPackage_SO:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.46x2.31mm_ThermalViasU1, U2
10.001Resistor_SMD:R_0603_1608MetricR18
110kResistor_SMD:R_0603_1608MetricR17
122uFCapacitor_SMD:C_1206_3216MetricC20
12KResistor_SMD:R_0402_1005MetricRfastcharge1
13KResistor_SMD:R_0603_1608MetricR_normalcharging1
14.7uHInductor_SMD:L_6.3x6.3_H3L1
175RResistor_SMD:R_0603_1608MetricR20
1AP2112K-3.3Package_TO_SOT_SMD:TSOT-23-5U13
1Conn_01x02_PinConnector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_HorizontalJ3
1Conn_02x16_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x16_P2.54mm_VerticalJ1
1HUSB237-AA001-DN06RLibrary:TDFN-6_L2.0-W2.0-P0.65-TL-EPU10
1INA219AIDCNRPackage_TO_SOT_SMD:SOT-23-8U11
1MCP73812T-420I-OTPackage_TO_SOT_SMD:SOT-23-5U9
1NMOSLibrary:SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BRQ2
1SW_Wuerth_450301014042Button_Switch_THT:SW_Slide-03_Wuerth-WS-SLTV_10x2.5x6.4_P2.54mmSW3
1TPS613222ADBVPackage_TO_SOT_SMD:SOT-23-3U8
1USB 3.1 C 6PFLibrary:USB-C-SMD_TYPE-C-USB-13USBC1

Similar boards

  • 2 layers77.3 × 58.5 mmEEE3088F MM Power Project, the printed circuit board in 3D

    EEE3088F MM Power Project

    KLPJOA002/EEE3088F_PCP_Power_Project

    Git hub repo containing pcp and kicad files for EEE3088F 2025 project

    88 parts
  • 2 layers90 × 14 mmFan ctrl, the printed circuit board in 3D

    Fan ctrl

    janiszah/solder-fume-extractor

    Solder Fume Extractor

    44 parts
  • 2 layers82 × 60 mmEEE3088F PCB Project, the printed circuit board in 3D

    EEE3088F PCB Project

    LlamaLuLu/Micromouse-Lula-and-Rejoice

    Our Micromouse power subsystem for the Design course EEE3088F

    107 parts
  • 2 layersEEE3088F 2025 Powerboard, the printed circuit board in 3D

    EEE3088F 2025 Powerboard

    May-engineer/EEE3088F-Micromouse-power-module-

    repo used to keep track of latest PCB design

    75 parts
  • 2 layers81.4 × 20 mmESP32-C6-USB switch, the printed circuit board in 3D

    ESP32-C6-USB switch

    tomjtoth/ESP32-C6-USB-switch

    I found 1x type-A to 3x type-A wireless USB switches on AliExpress.

    9 parts
  • 4 layers100 × 60 mmT1conv, the printed circuit board in 3D

    T1conv

    ajefferies2/t1conv

    100BASE-T1 ↔ 100BASE-TX media converter + dual CAN FD/USB adapter on one board.

    125 parts
  • 2 layers90 × 50 mmH2S Sensor, the printed circuit board in 3D

    H2S Sensor

    Global-Health-Engineering/h2s-monitor

    Design and Development of a Low-Cost Hydrogen Sulfide Sensor System for Biogas Monitoring

    56 parts

Questions

How big is the Project Design PCB?

It measures 79.5 × 59.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Project Design use?

61 parts, built around the DRV8833PWP, TPS613222ADBV, TPS22918TDBVRQ1 and AP2112K-3.3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Project Design KiCad files?

From the KutlwanoP555/3088-Project-Design repository on GitHub, at the commit this page was made from: the board is Project Design/Project Design.kicad_pcb and its schematic Project Design/Project Design.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Project Design design in my own project?

Its repository states no licence, so its author keeps all rights: ask KutlwanoP555 before reusing the design.