
Fugu2
fl4p/Fugu2
Links: git | kicanvas | cadlab | docs | pdf schematics | IBOM (TODO) | firmware | additional docs & resources
Boards in 44 GitHub repositories, designed in KiCad, that use the SN74LVC1G125DBVR-TP by TECH PUBLIC (-40℃~+125℃ 1 1.65V~5.5V 2.6ns@5.0V,50pF 24mA 24mA 2uA 74LVC Tri-State Unidirectional SOT-23-5 Buffers, Drivers, Receivers, Transceivers ROHS). See how each wires it, with its parts, size, README and files; the SN74LVC1G125DBVR-TP’s symbol, footprint and pinout are on its own page.

fl4p/Fugu2
Links: git | kicanvas | cadlab | docs | pdf schematics | IBOM (TODO) | firmware | additional docs & resources

festlv/rioctrl-hw
Hardware design for modular CNC controller

ComNets-Bremen/MoleNet
MoleNet: A Wireless Underground Sensor Network platform

ss1-ops/robotic-arm-5-digit-manipulator
BCN3D Moveo 6-DOF arm + custom Aero Hand gripper. ROS 2 Jazzy, ESP32-S3 micro-ROS, vision pick-and-place, full hardware/firmware/software stack.



dennowiggle/FLEADiP
FLEADiP is a compatiable add-on board for the Z80 Retro! project

gasiepgodoy/Open-Source-PLC
Open Source Programmable Logic Controller (Hardware and Software). Based on the Master of Science in Electrical Engineering of João Vitor Rocha Santana

Mowibox/chromapi_motherboard
Raspberry Pi control HAT dedicated to the quadruped robot Chromapi.


rico-x/GemilaiMate
Gemilai 3007Z DIY carrier and standalone firmware. Prototype: hardware not assembled or tested.


dennowiggle/ESP32_Interface
Facilitate learning the Z80 Retro! hardware and software.


HeyPCB/knuckle
35 mm round FOC driver for a GBM2804 gimbal motor that answers on the Open Duck Mini's servo bus as an STS3215. 6-layer KiCad 10 board plus printed standoff, cover and horn adapter.

HeyPCB/quack-core
Brain board for the Open Duck Mini: Pi Zero 2W carrier, 14-servo STS bus, fused 2S power path in stitched copper zones (15-18 A battery side), USB-C charging with balancing, IMU.


mahmoud-elghamry/thermocouple
This directory is a self-contained KiCad 10 project. It does not share files with, and must not be confused with, the single-channel board in hardware/single-channel/.



DD1SB/ARDF-TX
Date: 2026-10-15. Engineering review only; unbuilt and unenergized. Open RF80.kicadpro, schematic and native PCB in KiCad10.0.6. Three primary PCBs and the separate VHF true-AM design are unchanged.

DeadlySIn777/Controller
Unfinished CNC controller motherboard: native KiCad sources, rules, DSN and global routing review

fgihl/usb-c-one
Small one port USB-C hub, similar to YKUSH XS, but uses USB-C connectors

Gamecard/k2-plus-cm5
K2 Plus CM5 – Creality K2 Plus mit Upstream-Klipper auf einem Raspberry Pi CM5