
L0 Dynamixel
Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

Custom Luos DXL Module to add fans control
Dxl fan module is an open-source printed circuit board by pollen-robotics, from the pollen-robotics/dxl-fan-module repository on GitHub. It is a 2-layer board of 20.3 × 25 mm with 23 parts on 21 nets, routed with 123 tracks and 7 vias.
It is built around the SN74LVC1G125DBVR-TP, PMV25ENEA and TPS71550DCKR-TP. Its parts include 5 connectors, 4 capacitors, 3 resistors, 3 ICs and 3 transistors.
This repository contains the KiCad project of a custom Luos DXL Module with fans control for Reachy.

This is a DXL Luos module that can be seen here : https://github.com/Luos-io/Mod_dxl . Three connectors for 12V fans have been added, controlled by the Luos microcontroller through transistors NMOSFET.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100nF | Common_Footprint:C_0402_NoSilk | C1, C2, C3 |
| 3 | BAT_WIRE | Common_Footprint:JST_PH_B2B-PH-K_02x2.00mm_Straight | Con1, Con2, Con3 |
| 3 | PMV25ENEA | Common_Footprint:SOT-23 | Q1, Q2, Q3 |
| 2 | 10K | Common_Footprint:R_0402_NoSilk | R1, R3 |
| 1 | 0,47µF | Common_Footprint:C_0402_NoSilk | C4 |
| 1 | 100 | Common_Footprint:PRG18_RB | TH1 |
| 1 | 150 | Common_Footprint:R_0402_NoSilk | R2 |
| 1 | 5v1 | Common_Footprint:D_SOD-323 | D1 |
| 1 | DXL | Common_Footprint:XL320_MX | J2 |
| 1 | D_Zener | Common_Footprint:D_SOD-323F | D2 |
| 1 | LOGO | Common_Footprint:Luos_logo_xxsmall | G*** |
| 1 | LOGO | Logos:logo | G*** |
| 1 | SN74LVC1G125DBVR | Common_Footprint:SOT-23-5 | U3 |
| 1 | SN74LVC1G126DBVT | Common_Footprint:SOT-23-5 | U2 |
| 1 | TPS71550DCKR | Common_Footprint:SC-70-5 | U1 |
| 1 | l0_Socket | Common_Footprint:l0_Shield_Socket | J1 |

Luos-io/luos_engine
Open-source and real-time orchestrator for cyber-physical-systems, to easily design, test and deploy embedded applications and digital twins.

fl4p/Fugu2
Links: git | kicanvas | cadlab | docs | pdf schematics | IBOM (TODO) | firmware | additional docs & resources

festlv/rioctrl-hw
Hardware design for modular CNC controller

ComNets-Bremen/MoleNet
MoleNet: A Wireless Underground Sensor Network platform

ss1-ops/robotic-arm-5-digit-manipulator
BCN3D Moveo 6-DOF arm + custom Aero Hand gripper. ROS 2 Jazzy, ESP32-S3 micro-ROS, vision pick-and-place, full hardware/firmware/software stack.



dennowiggle/FLEADiP
FLEADiP is a compatiable add-on board for the Z80 Retro! project
It measures 20.3 × 25 mm and has 2 copper layers, 1.6 mm thick.
23 parts, built around the SN74LVC1G125DBVR-TP, PMV25ENEA and TPS71550DCKR-TP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the pollen-robotics/dxl-fan-module repository on GitHub, at the commit this page was made from: the board is dxl-fan-module/dxl-fan-module.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask pollen-robotics before reusing the design.