Skip to the content
12345

SN74LVC1G125DBVR-TP

TECH PUBLICExtended

-40℃~+125℃ 1 1.65V~5.5V 2.6ns@5.0V,50pF 24mA 24mA 2uA 74LVC Tri-State Unidirectional SOT-23-5 Buffers, Drivers, Receivers, Transceivers ROHS

Part id
tech-public/SN74LVC1G125DBVR-TP
Category
Buffers, Drivers, Receivers, Transceivers
Package
SOT-23-5
Pins
5
In stock
10,246 at JLCPCB (C3040625)
Used on
57 open-source boards

Overview

The SN74LVC1G125DBVR-TP is a buffers, Drivers, Receivers, Transceiver made by TECH PUBLIC in a SOT-23-5 package with 5 pins. -40℃~+125℃ 1 1.65V~5.5V 2.6ns@5.0V,50pF 24mA 24mA 2uA 74LVC Tri-State Unidirectional SOT-23-5 Buffers, Drivers, Receivers, Transceivers ROHS.

PCBKit's library has its KiCad symbol (74xGxx:74LVC1G125, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 10,246 are in stock at JLCPCB (part C3040625). 57 open-source boards in 44 repositories on GitHub use it.

Symbol

123GND45VCC
74xGxx:74LVC1G125From KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

Pinout

5
The pins of the SN74LVC1G125DBVR-TP
PinNameType
1—Input
2—Input
3GNDPower in
4—Tri-state
5VCCPower in

Open-source boards using it

57See all 57
  • 2 layers58.5 × 88 mmFugu2, the printed circuit board in 3D

    Fugu2

    fl4p/Fugu2

    Links: git | kicanvas | cadlab | docs | pdf schematics | IBOM (TODO) | firmware | additional docs & resources

    147 parts24
  • 4 layers190 × 100 mmRioctrl controller, the printed circuit board in 3D

    Rioctrl controller

    festlv/rioctrl-hw

    Hardware design for modular CNC controller

    281 parts16CERN-OHL-S-2.0
  • 2 layers105 × 65 mmMoleNet V5.2.2, the printed circuit board in 3D

    MoleNet V5.2.2

    ComNets-Bremen/MoleNet

    MoleNet: A Wireless Underground Sensor Network platform

    71 parts13GPL-3.0
  • 2 layers40.7 × 43 mmAero Hand Open Left, the printed circuit board in 3D

    Aero Hand Open Left

    ss1-ops/robotic-arm-5-digit-manipulator

    BCN3D Moveo 6-DOF arm + custom Aero Hand gripper. ROS 2 Jazzy, ESP32-S3 micro-ROS, vision pick-and-place, full hardware/firmware/software stack.

    28 parts7MIT
  • 2 layers60 × 146.5 mmTilda6-bot, the printed circuit board in 3D

    Tilda6-bot

    emfcamp/TiDAL-Hardware

    88 parts4
  • 4 layers65 × 30 mmGripper hat, the printed circuit board in 3D

    Gripper hat

    nhnifong/stringman-pcbs

    PCBs used in the Stringman robot

    56 parts3
  • 4 layers100 × 72 mmFLEADiP, the printed circuit board in 3D

    FLEADiP

    dennowiggle/FLEADiP

    FLEADiP is a compatiable add-on board for the Z80 Retro! project

    226 parts2LGPL-2.1
  • 4 layers233.4 × 147.3 mmOpenPLC Hardware, the printed circuit board in 3D

    OpenPLC Hardware

    gasiepgodoy/Open-Source-PLC

    Open Source Programmable Logic Controller (Hardware and Software). Based on the Master of Science in Electrical Engineering of João Vitor Rocha Santana

    494 parts2

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SN74LVC1G125DBVR-TP?

Yes. The symbol is 74xGxx:74LVC1G125 and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SN74LVC1G125DBVR-TP?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the SN74LVC1G125DBVR-TP datasheet?

TECH PUBLIC publishes it: the Datasheet link on this page opens it.

Where can I order the SN74LVC1G125DBVR-TP?

JLCPCB lists it as part C3040625, with 10,246 in stock; the sellers' links on this page open their listings.

What can replace the SN74LVC1G125DBVR-TP?

Parts like it in the library: the SN74LV1T125DBV by Texas Instruments, the SN74LVC1G17DBVR-JSM by JSMSEMI, the SN74LVC1G07DBVR-JSM by JSMSEMI and the SN74LVC1G34DBVR-JSM by JSMSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SN74LVC1G125DBVR-TP?

57 boards in 44 repositories on GitHub; the most starred are listed on this page, with their KiCad files.