Skip to the content
4 layers88.1 × 59.4 mmChromapi motherboard v1, the printed circuit board in 3D

Chromapi motherboard v1

Mowibox/chromapi_motherboard2

Raspberry Pi control HAT dedicated to the quadruped robot Chromapi.

Size
88.1 × 59.4 mm
Copper layers
4
Thickness
1.6 mm
Parts
139
Nets
111
Pads
498
Tracks, vias
830, 312
Pours
239
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
9 Feb 2026
Updated
5 Nov 2026

Overview

Chromapi motherboard v1 is an open-source printed circuit board by Mowibox, from the Mowibox/chromapi_motherboard repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 88.1 × 59.4 mm with 139 parts on 111 nets, routed with 830 tracks and 312 vias.

It is built around the STM32G431KBT6, SN74LVC1G125DBVR-TP and SN74LVC1G126DBVR-TP, with the INA226AQDGSRQ1, MAX98357AETE+T and TPS513885VABR among its other parts. Its parts include 42 capacitors, 36 resistors, 14 connectors, 11 ICs and 6 diodes. It belongs with the robots and motor control and computers and single-board computers boards and the STM32 boards of this library.

Main components

12

README

README.md

chromapi_motherboard

This repo contains a dedicated control HAT designed to manage the high-speed motion, power distribution, and sensor integration required for the quadruped robot Chromapi.

Chromapi KiCad STM32 Firmware: Apache 2.0 Hardware: CC BY-NC-SA 4.0 Issues Stars

chromapi_motherboard

Designed with KiCad 10.

Table of contents

SectionDescription
Project overviewGeneral description of the quadruped control board
AuthorsMain contributors information
Sponsors & AcknowledgementsInformation about project sponsors and hardware support
Resources & DocumentationLinks to datasheets, BOM, and design architectures
ContributionsHow to contribute to the repository
LicenseLicensing information

Project overview

ResourceDescriptionLocationStatus
💻 FirmwareSTM32 low-level drivers and communication protocol./firmwareAvailable
📐 SchematicsPDF for hardware architecture/hardware/schematic_pdfAvailable
📦 ManufacturingGerbers, Drill files, BOM, and CPL for assembly./hardware/productionAvailable

Chromapi's Anatomy

  • 🧠 The Brain: The STM32G431KBT6 MCU handles real-time tasks: servo control, IMU fusion, and power monitoring. The Raspberry Pi runs high-level control, vision, and the Python SDK. They communicate through a custom UART bridge at 2 Mbps.

  • 💪 The Muscles: The SN74LVC1G126 and SN74LVC1G125 buffer the half-duplex TTL serial bus (a single data wire, its direction switched by the USART hardware DE signal) for 12 Feetech STS3215 servos. The STM32 polls servo positions at 200 Hz.

  • ❤️ The Heart: The TPS51388 converts the 18650 2S battery voltage to 5V. The LD39050 generates the 3.3V rail. The INA226 monitors voltage, current, and power via I2C.

  • 🛡️ The Immune System: The CN3302 charges the two 18650 Li-ion cells through USB-C. The HY2120 provides protection against over-discharge, over-current, and short circuits.

  • 👁️ The Senses & Balance: The BMI088 IMU gives acceleration and angular velocity data with SPI. A Mahony filter runs at 400 Hz and outputs orientation as a quaternion. Four foot switches detect ground contact for gait timing.

  • 🗣️ The Voice & Expression: The MAX98357A drives the speaker via I2S communication. The ICS-43434 microphone captures audio through I2S. And the SN74AHCT1G125 level-shifts the 3.3V signal to 5V for the WS2812B RGB LEDs.

Authors

Sponsors & Acknowledgements

The hardware development of this board relies on the resources provided by the sponsors below.

PCBWay

PCBWay is a global manufacturer specializing in rapid prototyping and low-volume hardware production, offering advanced PCB fabrication, turnkey assembly, CNC machining, and 3D printing.

PCBWay

For this project, I utilized their sponsored PCB manufacturing and assembly (PCBA) services. Beyond fast production, their engineering team excels at detailed file reviews by cross-checking design options, BOMs, and footprints to prevent errors early. Their reliable component sourcing and rigorous verification were of great help in building a high-quality prototype for Chromapi's motherboard.


Huge thanks to all the hardware folks who reviewed my schematics, or gave me layout tips. I really appreciate your time and support!

Resources & Documentation

⚡ Specifications📄 Bill of Materials📡 Protocol Reference
Operating voltages, current limits, and thermal ratings.Detailed BOM with part numbers and unit costs.Custom UART protocol between RPi and STM32.
👉 View Specs👉 View BOM👉 View Protocol

Power Architecture

mermaid
%%{init: {'themeCSS': '.edgeLabel, .edgeLabel p, .labelBkg { background-color: transparent !important; } .edgeLabel rect { fill: transparent !important; }'}}%%
flowchart TD
    CHG[["USB-C charge<br/>CN3302"]] -.->|"charge → B+ ≈ 7.2–8.4V"| CELLS[("Battery<br/>18650 x2")]
    CELLS -->|"B+/BM/B-"| HY["HY2120<br/>BMS protection"]
    HY -->|"B+"| SW[["Power switch"]]

    SW -->|"V_BATT ≈ 7.2–8.4V"| SHUNT[["INA226 shunt sense<br/>2mΩ"]]
    SHUNT -->|"V_SYS ≈ 7.2–8.4V"| REG5{{"Voltage regulation<br/>TPS51388 · Fsw=600kHz"}}
    SHUNT -->|"V_SYS"| SERVOS(["Servomotors x12<br/>Feetech STS3215-C001"])

    REG5 -->|"+5V"| RPI["Raspberry Pi"]
    REG5 -->|"+5V"| FANPWR(["Fan<br/>Noctua NF-A4x10"])
    REG5 -->|"+5V"| LEDPWR(["RGB LEDs<br/>WS2812B"])
    REG5 -->|"+5V"| REG33{{"Voltage regulation<br/>LD39050 LDO"}}

    REG33 -->|"+3.3V"| MCU["MCU<br/>STM32G431KBT6"]
    REG33 -->|"+3.3V"| IMU["IMU<br/>BMI088"]
    REG33 -->|"+3.3V"| INA["Power monitor<br/>INA226"]
    REG33 -->|"+3.3V"| AUDIO["Speaker + Microphone<br/>MAX98357A / ICS-43434"]

    classDef power fill:#dd2757,color:#ffffff,stroke:none
    classDef voltreg fill:#ea684c,color:#ffffff,stroke:none
    classDef ic fill:#25b3ae,color:#ffffff,stroke:none
    classDef actuator fill:#c027e7,color:#ffffff,stroke:none

Communication Architecture

mermaid
%%{init: {'themeCSS': '.edgeLabel, .edgeLabel p, .labelBkg { background-color: transparent !important; } .edgeLabel rect { fill: transparent !important; }'}}%%
flowchart LR
    RPI["Raspberry Pi"]
    MCU["STM32G431KBT6<br/>SYSCLK · 160 MHz"]
    SERVOS(["Servomotors x12<br/>STS3215-C001"])
    IMU["IMU<br/>BMI088"]
    PWR["Power Monitor<br/>INA226"]
    LED(["RGB LEDs<br/>WS2812B"])
    CAM["Wide Angle Camera<br/>IMX219-D160"]
    AUDIO["Speaker + Microphone<br/>MAX98357A / ICS-43434"]
    FAN(["Fan<br/>Noctua NF-A4x10"])

    RPI <-->|"Custom bridge protocol<br/>UART1 · 2 Mbps · 100 Hz control loop"| MCU
    MCU <-->|"Half-duplex serial<br/>USART2 · 1 Mbps · 200 Hz"| SERVOS
    MCU <-->|"SPI1 · 5 MHz · 400 Hz (Mahony AHRS)"| IMU
    MCU <-->|"I2C1 · 400 kHz · 10 Hz poll"| PWR
    MCU -->|"PWM+DMA · 800 kHz"| LED

    RPI -->|"CSI-2"| CAM
    RPI <-->|"I2S"| AUDIO
    RPI <-->|"PWM + Tacho"| FAN

    classDef ic fill:#25b3ae,color:#ffffff,stroke:none
    classDef actuator fill:#c027e7,color:#ffffff,stroke:none

Contributions

Contributions are always welcome!

  • Report Issues: Found an error or have a feature request? Create a new issue here.
  • Fix Bugs & Add Features: Find out where you can lend a hand by checking out existing issues.

License

This repository is multi-licensed:

PartPathLicense
Firmware (own code)/firmwareApache 2.0
Hardware (schematics, PCB, footprints, symbols, fabrication files)/hardwareCC BY-NC-SA 4.0
Documentation and media (README, images, renders)/assets, this READMECC BY-NC-SA 4.0

Third-party content keeps its own license: the STM32G4 HAL and CMSIS in /firmware/chromapi_stm32_core/Drivers (see their LICENSE.txt) and STM32CubeMX-generated files (main.c, stm32g4xx_*, syscalls.c, sysmem.c, system_stm32g4xx.c, startup and linker files) belong to STMicroelectronics; ina226.[ch] is Apache 2.0 by AutoFox; bmi088.[ch] is adapted from pms67/LittleBrain-STM32F4-Sensorboard and ws2812b.[ch] from hey-frnk/STM32_HAL_NeoPixel; datasheets in /docs and 3D models in /hardware/3d_models belong to their respective manufacturers; the PCBWay logo (assets/pcbway.png) belongs to PCBWay.

CC BY-NC-SA 4.0

Parts

139
QtyValueFootprintReferences
12100nFCapacitor_SMD:C_0603_1608MetricC1, C4, C7, C11, C31, C32, C35, C36, C37, C38, C39, C40
11100nFCapacitor_SMD:C_0402_1005MetricC2, C3, C20, C21, C22, C23, C24, C27, C28, C29, C42
1010kResistor_SMD:R_0402_1005MetricR2, R3, R23, R24, R28, R29, R32, R33, R34, R35
6LOGOLOGOG***, G***, G***, G***, G***, G***
51kResistor_SMD:R_0603_1608MetricR12, R13, R17, R22, R36
40Resistor_SMD:R_0603_1608MetricR5, R8, R14, R16
422uFCapacitor_SMD:C_0805_2012MetricC13, C14, C15, C16
4MountingHole_PadMountingHole:MountingHole_2.7mm_M2.5_Pad_ViaH2, H3, H4, H5
3100kResistor_SMD:R_0603_1608MetricR15, R19, R30
310uFCapacitor_SMD:C_0805_2012MetricC25, C30, C41
31uFCapacitor_SMD:C_0603_1608MetricC18, C19, C26
322uFCapacitor_SMD:C_1206_3216MetricC8, C9, C10
3330Resistor_SMD:R_0402_1005MetricR1, R4, R26
3FerriteBeadInductor_SMD:L_0805_2012MetricFB1, FB2, FB3
3FiducialFiducial:Fiducial_1mm_Mask2mmFID1, FID2, FID3
2100Resistor_SMD:R_0402_1005MetricR25, R27
2220pFCapacitor_SMD:C_0603_1608MetricC33, C34
222uFCapacitor_SMD:CP_Elec_5x5.8C5, C6
25.1kResistor_SMD:R_0603_1608MetricR10, R11
2CSD17581Q3APackage_SON:VSON-8_3.3x3.3mm_P0.65mm_NexFETQ1, Q2
2SS34Diode_SMD:D_SMAD1, D2
11.5uHChromapi_FP:IND_1040-WE-HCI_WREL2
1137kResistor_SMD:R_0603_1608MetricR18
118.2kResistor_SMD:R_0603_1608MetricR20
11MResistor_SMD:R_0402_1005MetricR31
12.2uFCapacitor_SMD:C_0603_1608MetricC12
12kResistor_SMD:R_0402_1005MetricR7
12mResistor_SMD:R_2512_6332MetricR6
14.7uHChromapi_FP:INDM6864X300NL1
1470pFCapacitor_SMD:C_0603_1608MetricC17
160mResistor_SMD:R_1206_3216MetricR9
168kResistor_SMD:R_0603_1608MetricR21
1AO4435Chromapi_FP:ao4435_SOIC127P600X175-8NQ3
1AO4468Chromapi_FP:ao4435_SOIC127P600X175-8NQ4
1BMI088Package_LGA:Bosch_LGA-16_4.5x3mm_P0.5mm_LayoutBorder7x1y_ClockwisePinNumberingU11
1Battery InputConnector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_VerticalJ1
1Bottom Left SwitchConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ12
1Bottom Right SwitchConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ13
1CHG_LEDLED_SMD:LED_0603_1608MetricD3
1CN3302Package_SO:SOP-8_3.76x4.96mm_P1.27mmU3
1Conn_BotLeftConnector_Molex:Molex_SPOX_5267-03A_1x03_P2.50mm_VerticalJ7
1Conn_BotRightConnector_Molex:Molex_SPOX_5267-03A_1x03_P2.50mm_VerticalJ8
1Conn_TopLeftConnector_Molex:Molex_SPOX_5267-03A_1x03_P2.50mm_VerticalJ5
1Conn_TopRightConnector_Molex:Molex_SPOX_5267-03A_1x03_P2.50mm_VerticalJ6
1DONE_LEDLED_SMD:LED_0603_1608MetricD4
1HY2120Package_TO_SOT_SMD:SOT-23-6U1
1ICS-43434Sensor_Audio:InvenSense_ICS-43434-6_3.5x2.65mmMK1
1INA226Package_SO:TSSOP-10_3x3mm_P0.5mmU2
1LD39050PU33RChromapi_FP:ld39050PU33R_SON95P300X300X100-7NU5
1MAX98357APackage_DFN_QFN:TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mmU10
1Noctua NF-A4x10Connector:FanPinHeader_1x04_P2.54mm_VerticalM1
1ON_LEDLED_SMD:LED_0603_1608MetricD5
1Power SwitchConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ2
1RGB LED RingConnector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_VerticalJ4
1RPI_ConnectorConnector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_VerticalJ14
1SN74AHCT1G125DBVRChromapi_FP:SOT95P280X145-5NU8
1SN74LVC1G125DBVRChromapi_FP:SOT95P280X145-5NU9
1SN74LVC1G126DBVRChromapi_FP:SOT95P280X145-5NU6
1STM32G431KBTxPackage_QFP:LQFP-32_7x7mm_P0.8mmU7
1Speaker connectorConnector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_HorizontalJ9
1TPS51388VABRChromapi_FP:TPS513885VABRU4
1TP_3V3TestPoint:TestPoint_Pad_D1.5mmTP3
1TP_5VTestPoint:TestPoint_Pad_D1.5mmTP1
1TP_BATTTestPoint:TestPoint_Pad_D1.5mmTP2
1TP_SERVO_DATATestPoint:TestPoint_Pad_D1.0mmTP5
1TP_USART_DETestPoint:TestPoint_Pad_D1.0mmTP4
1Top Left SwitchConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ10
1Top Right SwitchConnector_JST:JST_XH_B2B-XH-A_1x02_P2.50mm_VerticalJ11
1USB_C_Receptacle_USB2.0_14PConnector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12J3
1WS2812BLED_SMD:LED_WS2812B-2020_PLCC4_2.0x2.0mmD6
1~Chromapi_FP:chromapi_logoH1

Similar boards

  • 4 layers60 × 40 mmB BQ24650-BRK R1.0, the printed circuit board in 3D

    B BQ24650-BRK R1.0

    Boardoza/SenseTech-Competition-2026

    Bu repo, Boardoza SenseTech 2026 yarışmasında kullanılacak kartların kaynak repolarını bir arada tutmak için oluşturulmuştur.

    65 parts1
  • 2 layers105.8 × 80.2 mmBattery psu, the printed circuit board in 3D

    Battery psu

    ideocentric/ribbon-synth

    Ribbon Synthesizer using Daisy Seed.

    41 parts1MIT
  • 2 layersCoralC5-Motor, the printed circuit board in 3D

    CoralC5-Motor

    SmallCoral/c5-car

    用 KiCad 10 打开 CoralC5-Expansion.kicadpro。这是 Coral-C5 的单槽扩展板,顶部 J14 接核心板,左右 J9、J8 各一组 2×24 排针,下方放 RJ45 和 microSD,右侧放 ESP32-C3-MINI-1U。100×86mm 板框为本项目暂定尺寸。

    180 parts
  • 4 layers233.4 × 147.3 mmOpenPLC Hardware, the printed circuit board in 3D

    OpenPLC Hardware

    gasiepgodoy/Open-Source-PLC

    Open Source Programmable Logic Controller (Hardware and Software). Based on the Master of Science in Electrical Engineering of João Vitor Rocha Santana

    494 parts2
  • 4 layers41 × 20 mmPmod prbs slow, the printed circuit board in 3D

    Pmod prbs slow

    azonenberg/starshipraider

    Open hardware test equipment

    47 parts193BSD-3-Clause
  • 2 layers100 × 49 mmTeemoWB, the printed circuit board in 3D

    TeemoWB

    TBAMax/WidebandLambda

    LSU4.9 conrtoller hardware based on Arduino Nano and Bosch CJ125 chip. Has standard 18x2 character LCD display. Can be used as standalone lambda monitor or as lambda controller for Speeduino.

    54 parts8
  • 4 layers222 × 100 mmHydroScan V1, the printed circuit board in 3D

    HydroScan V1

    paulmartinezcuenta/Proyecto_finales_mecatronica_ITLA

    Monorepo for two mechatronics projects sharing a panelized PCB: HydroScan (autonomous IoT maritime buoy with LTE, GPS, and solar power) and AUTOAMBU (automated medical respirator prototype with DC control and USB fast…

    156 parts1

Questions

How big is the Chromapi motherboard v1 PCB?

It measures 88.1 × 59.4 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Chromapi motherboard v1 use?

139 parts, built around the STM32G431KBT6, SN74LVC1G125DBVR-TP, SN74LVC1G126DBVR-TP and INA226AQDGSRQ1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Chromapi motherboard v1 KiCad files?

From the Mowibox/chromapi_motherboard repository on GitHub, at the commit this page was made from: the board is hardware/chromapi_motherboard_v1.kicad_pcb and its schematic hardware/chromapi_motherboard_v1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Chromapi motherboard v1 design in my own project?

Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).