2 layers40 × 40 mm
B MDBT50Q ATMS BRK R1.0
Boardoza/SenseTech-Competition-2026
Bu repo, Boardoza SenseTech 2026 yarışmasında kullanılacak kartların kaynak repolarını bir arada tutmak için oluşturulmuştur.
19 parts1
4 layers60 × 40 mm
B BQ24650-BRK R1.0
Boardoza/SenseTech-Competition-20261Bu repo, Boardoza SenseTech 2026 yarışmasında kullanılacak kartların kaynak repolarını bir arada tutmak için oluşturulmuştur.
- Size
- 60 × 40 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 65
- Nets
- 30
- Pads
- 157
- Tracks, vias
- 320, 182
- Pours
- 80
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 15 May 2026
- Updated
- 24 Jul 2026
Overview
B BQ24650-BRK R1.0 is an open-source printed circuit board by Boardoza, from the Boardoza/SenseTech-Competition-2026 repository on GitHub. It is a 4-layer board of 60 × 40 mm with 65 parts on 30 nets, routed with 320 tracks and 182 vias.
It is built around the BQ24650RVAR, CC0805KKX7R9BB105 and CL21B104KBCNNNC, with the RC0603FR-0710KL, CC0603JRNPO9BN220 and DST1040S among its other parts. Its parts include 20 resistors, 16 capacitors, 7 connectors, 6 diodes and 2 transistors.
Main components
12
BQ24650RVAR
VQFN-16-EP(3.6x3.6)-40℃~+125℃ 5V~28V 5uA Charging IC Lithium Battery、LiFePO4 Battery、Lead-Acid Battery Support Support VQFN-16-EP(3.6x3.6) Battery Management ROHSTexas InstrumentsBattery Management
CC0805KKX7R9BB105
08051uF 50V X7R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMTCL21B104KBCNNNC
0805100nF 50V X7R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMT
RC0603FR-0710KL
UncategorisedUnknown maker
CC0603JRNPO9BN220
060322pF 50V NP0 ±5% 0603 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSYAGEOMultilayer Ceramic Capacitors MLCC - SMD/SMTDST1040S
TO-277B-55℃~+150℃ 1 Independent 10A 150A 40V 570mV@10A 800uA@45V TO-277B Schottky Diodes ROHSLittelfuseSchottky Diodes
PA1206FRE470R01Z
120610mΩ 1W Current Sense Resistor SMD ±1% ±50ppm/℃ 1206 Current Sense Resistors / Shunt Resistors ROHSYAGEOCurrent Sense Resistors / Shunt Resistors
103AT-2
ThroughholeThroughhole NTC Thermistors ROHSSEMITECNTC Thermistors
HP05W3F1002T5E
0805-55℃~+155℃ 10kΩ 150V 333mW Thick Film Resistor ±1% ±100ppm/℃ 0805 Chip Resistor - Surface Mount ROHSUNI-ROYALChip Resistor - Surface Mount
HP03W5F100JT5E
0603-55℃~+155℃ 10Ω 200mW 75V Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSUNI-ROYALChip Resistor - Surface Mount
CL31B225KBHNNNE
12062.2uF 50V X7R ±10% 1206 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMT
2N7002K
SOT-23-55℃~+150℃ 1 N-channel 1.2Ω@10V、1.4Ω@5V 1.6V 2.9pF 300pC@4.5V 30pF 380mA 4.2pF 540mW 60V SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs
README
README.mdBoardoza SenseTech 2026
Bu repo, Boardoza SenseTech 2026 yarışmasında kullanılacak kartların kaynak repolarını bir arada tutmak için oluşturulmuştur. Her kart için ilgili klasörde donanım dosyaları, dökümanlara ve benzeri dosyalara ulaşabilirsiniz.
Parts
65| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 1uF | Capacitor_SMD:C_0805_2012Metric | C5, C6, C9, C11, C14, C16 |
| 4 | 22uF | Capacitor_SMD:C_1210_3225Metric | C8, C10, C12, C13 |
| 3 | 100K | Resistor_SMD:R_0603_1608Metric | R3, R16, R18 |
| 3 | 100nF | Capacitor_SMD:C_0805_2012Metric | C3, C4, C7 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric | R1, R2, R7 |
| 2 | 22pF | Capacitor_SMD:C_0603_1608Metric | C2, C15 |
| 2 | 3.9R | Resistor_SMD:R_1206_3216Metric | R5, R6 |
| 2 | CONN_03 | Connectors:1X03 | J4, J7 |
| 2 | DST1040S | Package_TO_SOT_SMD:TO-277B | D4, D6 |
| 1 | 0.01R | Resistor_SMD:R_1206_3216Metric | R15 |
| 1 | 100R | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 103AT-2 | others:103AT-2 | RT1 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric | R9 |
| 1 | 10R | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 12.6V | Connectors:1X02 | JP3 |
| 1 | 16.8V | Connectors:1X02 | JP4 |
| 1 | 2.2R | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 2.2uF | Capacitor_SMD:C_1206_3216Metric | C1 |
| 1 | 2N7002K | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | 30.1K | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 300K | Resistor_SMD:R_0603_1608Metric | R17 |
| 1 | 32.4K | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 330R | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 4.2V | Connectors:1X02 | JP1 |
| 1 | 4.7uH | others:IND_IHLP_2525_CZ-L | L1 |
| 1 | 499K | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | 5.23K | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 698K | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | 8.4V | Connectors:1X02 | JP2 |
| 1 | BARRIER TERMINAL | others:barrier_terminal | J3 |
| 1 | BATT+ | Connector_Wire:SolderWire-0.75sqmm_1x01_D1.25mm_OD3.5mm | H2 |
| 1 | BATT- | Connector_Wire:SolderWire-0.75sqmm_1x01_D1.25mm_OD3.5mm | H1 |
| 1 | BQ24650RVAT | others:BQ24650RVAT | U1 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_Horizontal | J1 |
| 1 | Battery_JST | others:JST_S2B-PH-K-S(LF)(SN) | J6 |
| 1 | JST_IN | others:JST_S2B-PH-K-S(LF)(SN) | J2 |
| 1 | LED INFO GREEN | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | LED INFO YELLOW | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | LED POWER | LED_SMD:LED_0603_1608Metric | D3_PWR |
| 1 | LOGO | logo:LOW_BATT | G*** |
| 1 | LOGO | logo:barreljack_polarity | Ge |
| 1 | LOGO | logo:FULL_BATT | G*** |
| 1 | RB521S30 | Diode_SMD:D_SOD-523 | D5 |
| 1 | SQJB60EP-T1_GE3 | others:SI7288DP-T1-GE3 | Q2 |
| 1 | SYSTEM_OUT | digikey-footprints:Term_Block_1x2_P5.08MM | J5 |
The 63 most common of 65 parts.
More from Boardoza/SenseTech-Competition-2026
2- 2 layers40 × 20 mm
B RFM68LCW BRK R1.0
Boardoza/SenseTech-Competition-2026
Bu repo, Boardoza SenseTech 2026 yarışmasında kullanılacak kartların kaynak repolarını bir arada tutmak için oluşturulmuştur.
12 parts1
Similar boards
- 4 layers80 × 60 mm
B DRV8317-BRK R1.0
Boardoza/Boardoza_DRV8317H_Three_Phase_BLDC_Driver_Breakout_Board
Boardoza DRV8317H Breakout Board is a three-phase 24V BLDC motor driver with integrated MOSFETs and SPI control.
135 partsCC-BY-SA-4.0 - 4 layers88.1 × 59.4 mm
Chromapi motherboard v1
Mowibox/chromapi_motherboard
Raspberry Pi control HAT dedicated to the quadruped robot Chromapi.
139 parts2Apache-2.0 - 2 layers184 × 94 mm
FIC Board
DanielRHoefer/satoshi-emblem
Toyota backlit grill emblem with sequential LEDs for 3rd gen 4runner
193 parts1 - 2 layers20 × 20 mm
B IrDA Transceiver BRK R1.0
Boardoza/Boardoza_IrDA_Transceiver_Infrared_Wireless_Communication_Breakout_Board
Compact infrared transceiver breakout board for short-range asynchronous wireless serial communication.
18 partsCC-BY-SA-4.0 - 4 layers24 × 27.3 mm
Aaronjamt Framework IR Module
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
39 parts915 - 4 layers85 × 56 mm
- 4 layers80 × 74.5 mm
GSM STM
reljamar/MQTT-GSM-receiver
A basic IoT device that connects to a mobile network and activates an output pin based on an MQTT message
108 partsMIT - 4 layers95.9 × 90.2 mm
KENSAT EPS v1.2
kenchangh/kensat
KENSAT, Edge-AI Compute in Orbit - A 2U CubeSat that runs a large language model on-orbit. A power-gated NVIDIA Jetson Orin Nano executes neural-network inference in space, and the results are downlinked over a custom…
218 parts119
Questions
How big is the B BQ24650-BRK R1.0 PCB?
It measures 60 × 40 mm and has 4 copper layers, 1.6 mm thick.
What parts does the B BQ24650-BRK R1.0 use?
65 parts, built around the BQ24650RVAR, CC0805KKX7R9BB105, CL21B104KBCNNNC and RC0603FR-0710KL. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the B BQ24650-BRK R1.0 KiCad files?
From the Boardoza/SenseTech-Competition-2026 repository on GitHub, at the commit this page was made from: the board is Boardoza_BQ24650_Solar_Charger_Module/hardware files/B-BQ24650-BRK-R1.0.kicad_pcb and its schematic Boardoza_BME688_AI_Environmental_Sensor_Breakout_Board/hardware files/B-BME688-BRK.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the B BQ24650-BRK R1.0 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Boardoza before reusing the design.