2 layers94 × 94 mm
FIC Board Lower
DanielRHoefer/satoshi-emblem
Toyota backlit grill emblem with sequential LEDs for 3rd gen 4runner
125 parts1
2 layers184 × 94 mm
FIC Board
DanielRHoefer/satoshi-emblem1Toyota backlit grill emblem with sequential LEDs for 3rd gen 4runner
- Size
- 184 × 94 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 193
- Nets
- 191
- Pads
- 767
- Tracks, vias
- 2,161, 250
- Pours
- 25
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 19 Feb 2022
- Updated
- 9 Apr 2025
Overview
FIC Board is an open-source printed circuit board by DanielRHoefer, from the DanielRHoefer/satoshi-emblem repository on GitHub. It is a 2-layer board of 184 × 94 mm with 193 parts on 191 nets, routed with 2,161 tracks and 250 vias.
It is built around the L7805CV, LM393DRG and RNCP0603FTD10K0, with the IRLR7843TRPBF, RNCP0603FTD1K00 and CL32B226KAJNNNE among its other parts. Its parts include 73 resistors, 42 transistors, 26 capacitors, 19 diodes and 7 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
12
L7805CV
TO-2200℃~+125℃@(Tj) 1 1.5A 2V@(1A) 35V 5V 68dB@(120Hz) 8mA Fixed Over Current Protection、Over Temperature Protection、Short Circuit Protection Positive TO-220 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSSTMicroelectronicsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
LM393DRG
SOP-80℃~+70℃ 100nA 1mV 2 2V~32V 36V 5nA 600uA Open-drain ±16V SOP-8 Comparators ROHSHANSCHIP semiconductorComparators
RNCP0603FTD10K0
0603-55℃~+155℃ 10kΩ 125mW Thin Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSStackpole Electronics (SEI)Chip Resistor - Surface Mount
IRLR7843TRPBF
TO-252140W 161A 2.3V@250uA 3.3mΩ@10V,15A 30V N-Channel DPAK MOSFETs ROHSInfineon TechnologiesMOSFETsRNCP0603FTD1K00
0603-55℃~+155℃ 125mW 150V 1kΩ Thin Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSStackpole Electronics (SEI)Chip Resistor - Surface Mount
CL32B226KAJNNNE
121022uF 25V X7R ±10% 1210 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSSamsung Electro-MechanicsMultilayer Ceramic Capacitors MLCC - SMD/SMT
MMBT3904
SOT-23-55℃~+150℃ 1 NPN 100 100nA 200mA 200mW 300MHz 300mV 40V 6V NPN SOT-23 Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)
3296X-1-103LF
SIP-3P,9.5x4.8mm10kΩ 25 500mW ±10% ±100ppm/℃ SIP-3P,9.5x4.8mm Potentiometers, Variable Resistors ROHSBournsPotentiometers & Variable Resistors
LTST-C191KGKT
0603-55℃~+85℃ 130° 20mA 2V 35mcd 567.5nm~576.5nm 574nm 75mW Discrete Diode Water Clear Yellow Green 0603 LED Indication - Discrete ROHSLite-OnLED Indication - DiscreteLTST-C191KSKT
0603-55℃~+85℃ 104mcd 130° 2.1V 20mA 584.5nm~597nm 588nm 75mW Discrete Diode Water Clear Yellow 0603 LED Indication - Discrete ROHSLite-OnLED Indication - Discrete
BZT55C4V7-GS08
SOD-801 Independent 4.4V~5V 4.7V 500mW 500nA 600Ω 80Ω SOD-80 Zener Diodes ROHSVishay IntertechnologyZener DiodesERJ-H3EF1003V
0603-55℃~+175℃ 100kΩ 125mW Thick Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHSPanasonicChip Resistor - Surface Mount
Parts
193| Qty | Value | Footprint | References |
|---|---|---|---|
| 35 | 10KΩ 0603 | Resistor_SMD:R_0603_1608Metric | R10, R21, R22, R23, R24, R29, R33, R37, R38, R39, R40, R41, R42, R43, R44, R45 +19 |
| 30 | IRLR7843 | Package_TO_SOT_SMD:TO-252-2 | Q1, Q2, Q11, Q13, Q15, Q17, Q18, Q19, Q20, Q21, Q23, Q25, Q26, Q27, Q28, Q29 +14 |
| 29 | 1KΩ 0603 | Resistor_SMD:R_0603_1608Metric | R1, R2, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R25, R26, R27, R28 +13 |
| 10 | 22uF 25V | Capacitor_SMD:C_1210_3225Metric | C7, C8, C9, C10, C11, C12, C15, C16, C17, C20 |
| 10 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q10, Q12, Q14, Q16, Q22, Q24, Q34, Q36, Q38, Q40 |
| 6 | 47uF 50V | Capacitor_SMD:CP_Elec_6.3x5.9 | C2, C3, C18, C22, C23, C24 |
| 6 | MountingHole_Pad | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad_TopOnly | H6, H7, H8, H9, H10, H11 |
| 4 | 2.2uF 50V | Capacitor_SMD:C_0603_1608Metric | C13, C14, C19, C21 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_Pad_TopBottom | H1, H2, H3, H4 |
| 3 | 10k | Potentiometer_THT:Potentiometer_Bourns_3296X_Horizontal | RV1, RV2, RV3 |
| 3 | 2.0V 20mA GRN 0603 | LED_SMD:LED_0603_1608Metric | D7, D10, D12 |
| 3 | 2.1V 20mA YLW 0603 | LED_SMD:LED_0603_1608Metric | D6, D8, D11 |
| 3 | 4.7V Zener SOD-80 | Diode_SMD:D_MiniMELF | D2, D3, D4 |
| 2 | 100KΩ 0603 | Resistor_SMD:R_0603_1608Metric | R65, R66 |
| 2 | 1N4148W-13-F | Diode_SMD:D_SOD-123 | D18, D20 |
| 2 | 2.0V 20mA RED 0603 | LED_SMD:LED_0603_1608Metric | D9, D13 |
| 2 | 5.11KΩ | Resistor_SMD:R_0603_1608Metric | R59, R60 |
| 2 | 8.87KΩ | Resistor_SMD:R_0603_1608Metric | R70, R71 |
| 2 | Conn_02x03_Odd_Even | FIC Board-footprints:Male_3x2_Conn | J2, J3 |
| 2 | IRF4905 | Package_TO_SOT_SMD:TO-263-2 | Q41, Q42 |
| 2 | TestPoint | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP2 |
| 2 | ~ | LED_SMD:LED_0603_1608Metric | D15, D16 |
| 1 | 0.1u 50V | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C1 |
| 1 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R62 |
| 1 | 10V Zener SOD-80 | Diode_SMD:D_MiniMELF | D14 |
| 1 | 1uF 25V | Capacitor_SMD:C_0603_1608Metric | C26 |
| 1 | 2.2Ω | Resistor_SMD:R_0603_1608Metric | R68 |
| 1 | 2.4V Zener SOD-80 | Diode_SMD:D_MiniMELF | D19 |
| 1 | 3557-2 | FIC Board-footprints:Univ_AUTO_Fuse | F1 |
| 1 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C25 |
| 1 | 5KP16A | Diode_THT:D_P600_R-6_P20.00mm_Horizontal | D17 |
| 1 | 6437288-3 | FIC Board-footprints:64372885 | J1 |
| 1 | 74279221100 | FIC Board-footprints:Wurth 742792903 L_12x12mm_H8mm | FB2 |
| 1 | 74279221100 | Inductor_SMD:L_1206_3216Metric_Pad1.22x1.90mm_HandSolder | FB1 |
| 1 | 8.87K | Resistor_SMD:R_0603_1608Metric | R56 |
| 1 | CL10B104KO8NNNC | Capacitor_SMD:C_0603_1608Metric | C5 |
| 1 | Conn_02x02_Odd_Even | FIC Board-footprints:Male_2x2_Conn | J6 |
| 1 | Conn_02x02_Odd_Even | FIC Board-footprints:Female_2x2_Conn | J5 |
| 1 | Conn_02x03_Odd_Even | FIC Board-footprints:Female_3x2_Conn | J7 |
| 1 | Diode_SMD:D_MiniMELF | Diode_SMD:D_MiniMELF | D1 |
| 1 | Jumper_2_Bridged | FIC Board-footprints:MaleHeader_1x2_conn | JP1 |
| 1 | KGM15BR51E224KT | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | L7805CV | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U3 |
| 1 | LM393DR | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | MEGA_PRO_EMBED_CH340G_{slash}_ATMEGA2560 | FIC Board-footprints:MODULE_MEGA_PRO_EMBED_CH340G___ATMEGA2560 | U1 |
| 1 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H5 |
| 1 | SIC453ED-T1-GE3 | FIC Board-footprints:SiC45X | U4 |
| 1 | SRP1265C-1R0M | FIC Board-footprints:INDPM135126X650N | L1 |
| 1 | SW_DIP_04 | Button_Switch_THT:SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mm | SW1 |
| 1 | ~ | FIC Board-footprints:Female_3x2_Conn | J4 |
More from DanielRHoefer/satoshi-emblem
2- 2 layers72.5 × 78 mm
FIC Board Upper
DanielRHoefer/satoshi-emblem
Toyota backlit grill emblem with sequential LEDs for 3rd gen 4runner
68 parts1
Similar boards
- 4 layers60 × 80 mm
- 4 layers171 × 124 mm
- 4 layers203.5 × 90 mm
BDCMotorController
nunosousa/TelescopeMirrorTester
This is an application intended to provide useful tools to perform Foucault or Wire testing on reflective telescope mirrors
323 partsMIT - 4 layers60 × 40 mm
B BQ24650-BRK R1.0
Boardoza/SenseTech-Competition-2026
Bu repo, Boardoza SenseTech 2026 yarışmasında kullanılacak kartların kaynak repolarını bir arada tutmak için oluşturulmuştur.
65 parts1 - 2 layers20 × 20 mm
B IrDA Transceiver BRK R1.0
Boardoza/Boardoza_IrDA_Transceiver_Infrared_Wireless_Communication_Breakout_Board
Compact infrared transceiver breakout board for short-range asynchronous wireless serial communication.
18 partsCC-BY-SA-4.0 - 4 layers24 × 27.3 mm
Aaronjamt Framework IR Module
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
39 parts915 - 2 layers70.9 × 38.1 mm
- 4 layers100 × 80 mm
Questions
How big is the FIC Board PCB?
It measures 184 × 94 mm and has 2 copper layers, 1.6 mm thick.
What parts does the FIC Board use?
193 parts, built around the L7805CV, LM393DRG, RNCP0603FTD10K0 and IRLR7843TRPBF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the FIC Board KiCad files?
From the DanielRHoefer/satoshi-emblem repository on GitHub, at the commit this page was made from: the board is FIC Board/FIC Board/FIC Board.kicad_pcb and its schematic FIC Board/FIC Board/FIC Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the FIC Board design in my own project?
Its repository states no licence, so its author keeps all rights: ask DanielRHoefer before reusing the design.