Skip to the content
12

RNCP0603FTD10K0

Stackpole Electronics (SEI)Extended

-55℃~+155℃ 10kΩ 125mW Thin Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHS

Part id
stackpole/RNCP0603FTD10K0
Category
Chip Resistor Surface Mount
Package
0603
Pins
2
In stock
1,716 at JLCPCB (C4030884)
Used on
15 open-source boards

Overview

The RNCP0603FTD10K0 is a chip Resistor Surface Mount made by Stackpole Electronics (SEI) in a 0603 package with 2 pins. -55℃~+155℃ 10kΩ 125mW Thin Film Resistor ±1% ±100ppm/℃ 0603 Chip Resistor - Surface Mount ROHS.

PCBKit's library has its KiCad symbol (Device:R, from KiCad's library) and its footprint (Resistor_SMD:R_0603_1608Metric, from KiCad's library), ready for a KiCad board. 1,716 are in stock at JLCPCB (part C4030884). 15 open-source boards in 11 repositories on GitHub use it.

Symbol

Device:RFrom KiCad's library

Footprint

12
Resistor_SMD:R_0603_1608MetricFrom KiCad's library

Pinout

2
The pins of the RNCP0603FTD10K0
PinNameType
1—Passive
2—Passive

Open-source boards using it

15See all 15
  • 4 layers86 × 53 mmDmx interceptor, the printed circuit board in 3D

    Dmx interceptor

    Marthaarman/dmx_interceptor_PCB

    Depending on the FT232RL you bought you need either male or female: - 1x female 5 pin header for ft232rl adapter: https://www.digikey.nl/nl/products/detail/adam-tech/RS1-05-G/9832046 - 1x male 5 pin header for ft232rl…

    12 parts2
  • 2 layers184 × 94 mmFIC Board, the printed circuit board in 3D

    FIC Board

    DanielRHoefer/satoshi-emblem

    Toyota backlit grill emblem with sequential LEDs for 3rd gen 4runner

    193 parts1
  • 4 layers127 × 76.2 mmPayload pcb, the printed circuit board in 3D

    Payload pcb

    austindriggs/urc-payload-pcb

    All-purpose control and interface board designed to manage mission-critical sensors and electronics for University Rover Challenge at WVU.

    114 partsMIT
  • 2 layers83 × 100 mm1u panel v1, the printed circuit board in 3D

    1u panel v1

    BrownSpaceEngineering/PVDX-Solar_PCB

    75 parts
  • 4 layers60 × 80 mmDigitalPCB, the printed circuit board in 3D

    DigitalPCB

    dwynnychuk/SmartSmoker

    Upgrades for Traeger to add smart capability

    111 parts
  • 4 layers96.7 × 78.4 mmPCB V2, the printed circuit board in 3D

    PCB V2

    Marthaarman/dmx-transceiver-interceptor-v2

    36 parts
  • 4 layers99.8 × 94.6 mmOresat proto card, the printed circuit board in 3D

    Oresat proto card

    pleiades-cluster/OreSat-Proto-Rev

    123 parts
  • 2 layers30 × 25 mmBrushed dual esc, the printed circuit board in 3D

    Brushed dual esc

    sigmondkukla/brushed-dual-esc

    Dual drive ESC for Clarkson Combat Robotics 1lb freshman PLAnt competition. Supports two 3A brushed drive motors and includes a 5V 1A BEC output to power a receiver.

    36 parts

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the RNCP0603FTD10K0?

Yes. The symbol is Device:R and the footprint Resistor_SMD:R_0603_1608Metric, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the RNCP0603FTD10K0?

0603, with 2 pins. Its footprint is drawn on this page.

Where is the RNCP0603FTD10K0 datasheet?

Stackpole Electronics (SEI) publishes it: the Datasheet link on this page opens it.

Where can I order the RNCP0603FTD10K0?

JLCPCB lists it as part C4030884, with 1,716 in stock; the sellers' links on this page open their listings.

What can replace the RNCP0603FTD10K0?

Parts like it in the library: the ESR03EZPF1002 by ROHM Semiconductor, the TNPW060310K0BEEA by Vishay Intertechnology, the RC0603FR-7W10KL by YAGEO and the CRCW060310K0FKEAHP by Vishay Intertechnology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the RNCP0603FTD10K0?

15 boards in 11 repositories on GitHub; the most starred are listed on this page, with their KiCad files.