Skip to the content
2 layers70.9 × 38.1 mmRwled ctrl, the printed circuit board in 3D

Rwled ctrl

cliffanet/rwled

RW-led factory

Size
70.9 × 38.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
53
Nets
74
Pads
234
Tracks, vias
421, 181
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
21 Oct 2023
Updated
12 Nov 2024

Overview

Rwled ctrl is an open-source printed circuit board by cliffanet, from the cliffanet/rwled repository on GitHub. It is a 2-layer board of 70.9 × 38.1 mm with 53 parts on 74 nets, routed with 421 tracks and 181 vias.

It is built around the CP2104EK, ESP32-WROOM-32 and BMP280, with the MIC5219YMM, IRF4905STRLPBF and SS56 among its other parts. Its parts include 13 resistors, 10 capacitors, 9 connectors, 5 diodes and 5 transistors. It belongs with the ESP32 boards of this library.

Main components

7

Parts

53
QtyValueFootprintReferences
910kResistor_SMD:R_0805_2012MetricR11, R12, R13, R23, R31, R34, R61, R62, R64
41μFCapacitor_SMD:C_0805_2012MetricC12, C22, C25, C27
4MountingHoleMountingHole:MountingHole_3.2mm_M3H11, H12, H13, H14
310μFCapacitor_SMD:C_0805_2012MetricC31, C61, C62
31N5819Diode_SMD:D_SOD-323D21, D22, D23
2100kResistor_SMD:R_Array_Convex_4x0603RN21, RN22
21kResistor_SMD:R_0805_2012MetricR32, R33
2IRF4905STRLPBFPackage_TO_SOT_SMD:TO-263-2Q61, Q62
2SS56Diode_SMD:D_SMAD24, D25
2UMH3NPackage_TO_SOT_SMD:SOT-363_SC-70-6Q31, Q63
1100kResistor_SMD:R_0805_2012MetricR21
1330ufCapacitor_Tantalum_SMD:CP_EIA-7343-20_Kemet-VC11
14,7μFCapacitor_SMD:C_0805_2012MetricC41
1470pCapacitor_SMD:C_0805_2012MetricC21
1510Resistor_SMD:R_0805_2012MetricR22
1BMP280Package_LGA:Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumberingU41
1CP2104Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mmU31
1ESP32-WROOM-32RF_Module:ESP32-WROOM-32U11
1MIC5219Package_TO_SOT_SMD:SOT-23-5U21
1ML5203Package_TO_SOT_SMD:SOT-23Q21
1USB_B_MicroConnector_USB:USB_Micro-B_Molex-105017-0001J31
1batt-abConnector_AMASS:AMASS_XT30U-F_1x02_P5.0mm_VerticalJ65
1batt-cdConnector_AMASS:AMASS_XT30U-F_1x02_P5.0mm_VerticalJ66
1batt-chgConnector_AMASS:AMASS_XT30U-M_1x02_P5.0mm_VerticalJ21
1btnButton_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mmSW11
1displayConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ11
1led-aConnector_JST:JST_XH_S3B-XH-A_1x03_P2.50mm_HorizontalJ61
1led-bConnector_JST:JST_XH_S3B-XH-A_1x03_P2.50mm_HorizontalJ62
1led-cConnector_JST:JST_XH_S3B-XH-A_1x03_P2.50mm_HorizontalJ63
1led-dConnector_JST:JST_XH_S3B-XH-A_1x03_P2.50mm_HorizontalJ64

More from cliffanet/rwled

3
  • 2 layers200 × 10.2 mmLedpanel al20, the printed circuit board in 3D

    Ledpanel al20

    cliffanet/rwled

    RW-led factory

    52 parts
  • 2 layers70.9 × 38.1 mmRwled ctrl, the printed circuit board in 3D

    Rwled ctrl

    cliffanet/rwled

    RW-led factory

    49 parts
  • 2 layers112.1 × 10.2 mmLedpanel al10, the printed circuit board in 3D

    Ledpanel al10

    cliffanet/rwled

    RW-led factory

    32 parts

Similar boards

  • 2 layers134.7 × 91.9 mmTrailCurrentTorrent, the printed circuit board in 3D

    TrailCurrentTorrent

    trailcurrentoss/TrailCurrentTorrent

    CAN bus controlled power distribution module for vehicle electrical circuits

    68 partsMIT
  • 2 layers100 × 90 mmSystem desgin project, the printed circuit board in 3D

    System desgin project

    dquang05/system_desgin_project

    Academic project - AGV: line following robot

    78 parts
  • 2 layers90 × 100 mmRobot, the printed circuit board in 3D

    Robot

    k6V457/maturitni_prace

    GOALS: - [x] Create this repository - [ ] Create graduation thesis - [ ] Create template in $\LaTeX$ - [ ] fill in blank spaces - [ ] modify template for SPSKA purposes - [ ] Write INTRO and theoretical part - [ ] start…

    12 partsMIT
  • 2 layers38 × 60 mmCrossometer mini, the printed circuit board in 3D

    Crossometer mini

    fredszaq/crossometer-mini

    Design files for crossometer-mini device

    63 parts2CERN-OHL-S-2.0
  • 2 layers184 × 94 mmFIC Board, the printed circuit board in 3D

    FIC Board

    DanielRHoefer/satoshi-emblem

    Toyota backlit grill emblem with sequential LEDs for 3rd gen 4runner

    193 parts1
  • 4 layers100 × 80 mmEsp32stepper, the printed circuit board in 3D

    Esp32stepper

    kulichbulich/ieap_motor

    IEAP Motor driver

    127 parts
  • 6 layers98.9 × 81.4 mmEthernetSwitch, the printed circuit board in 3D

    EthernetSwitch

    SamuelCicuitStudio/LAN9645-STM32-Managed-Ethernet-Switch

    Managed Ethernet switch platform built around the LAN9645 and STM32H743, featuring copper and SerDes ports, SPI management, RMII, LwIP, and a USB diagnostic CLI.

    231 parts

Questions

How big is the Rwled ctrl PCB?

It measures 70.9 × 38.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Rwled ctrl use?

53 parts, built around the CP2104EK, ESP32-WROOM-32, BMP280 and MIC5219YMM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Rwled ctrl KiCad files?

From the cliffanet/rwled repository on GitHub, at the commit this page was made from: the board is hw/ctrl/rwled-ctrl.kicad_pcb and its schematic hw/ctrl/rwled-ctrl.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Rwled ctrl design in my own project?

Its repository states no licence, so its author keeps all rights: ask cliffanet before reusing the design.