Skip to the content
12345

SN74LVC1G126DBVR-TP

TECH PUBLICExtended

-40℃~+125℃ 1 1 1.65V~5.5V 10uA 32mA 32mA 74LVC 9ns@5V,50pF Power-off isolation、Output enable Tri-State Unidirectional SOT-23-5 Buffers, Drivers, Receivers, Transceivers ROHS

Part id
tech-public/SN74LVC1G126DBVR-TP
Category
Buffers, Drivers, Receivers, Transceivers
Package
SOT-23-5
Pins
5
In stock
14,336 at JLCPCB (C46472327)
Used on
21 open-source boards

Overview

The SN74LVC1G126DBVR-TP is a buffers, Drivers, Receivers, Transceiver made by TECH PUBLIC in a SOT-23-5 package with 5 pins. -40℃~+125℃ 1 1 1.65V~5.5V 10uA 32mA 32mA 74LVC 9ns@5V,50pF Power-off isolation、Output enable Tri-State Unidirectional SOT-23-5 Buffers, Drivers, Receivers, Transceivers ROHS.

PCBKit's library has its KiCad symbol (74xGxx:74LVC1G126, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-5, from KiCad's library), ready for a KiCad board. 14,336 are in stock at JLCPCB (part C46472327). 21 open-source boards in 18 repositories on GitHub use it.

Symbol

123GND45VCC
74xGxx:74LVC1G126From KiCad's library

Footprint

12345
Package_TO_SOT_SMD:SOT-23-5From KiCad's library

Pinout

5
The pins of the SN74LVC1G126DBVR-TP
PinNameType
1—Input
2—Input
3GNDPower in
4—Tri-state
5VCCPower in

Open-source boards using it

21See all 21
  • 2 layers141.9 × 72.9 mmImu to dxl 10p, the printed circuit board in 3D

    Imu to dxl 10p

    jyg9/microduck-community-kit

    补充microduck缺少的硬件电路和固件,另外配套一些测试工具。imu_to_dxl;banana_pcb;microduck复刻

    897 parts28Apache-2.0
  • 4 layers65 × 30 mmElec gripette hub and dyn, the printed circuit board in 3D

    Elec gripette hub and dyn

    pollen-robotics/elec_grabette

    Set of electronic boards for Grabette/Gripette

    122 parts11Apache-2.0
  • 2 layers40.7 × 43 mmAero Hand Open Left, the printed circuit board in 3D

    Aero Hand Open Left

    ss1-ops/robotic-arm-5-digit-manipulator

    BCN3D Moveo 6-DOF arm + custom Aero Hand gripper. ROS 2 Jazzy, ESP32-S3 micro-ROS, vision pick-and-place, full hardware/firmware/software stack.

    28 parts7MIT
  • 4 layers65 × 30 mmGripper hat, the printed circuit board in 3D

    Gripper hat

    nhnifong/stringman-pcbs

    PCBs used in the Stringman robot

    56 parts3
  • 4 layers88.1 × 59.4 mmChromapi motherboard v1, the printed circuit board in 3D

    Chromapi motherboard v1

    Mowibox/chromapi_motherboard

    Raspberry Pi control HAT dedicated to the quadruped robot Chromapi.

    139 parts2Apache-2.0
  • 4 layers95 × 58 mmEsp32Tap, the printed circuit board in 3D

    Esp32Tap

    scottmsilver/treddy

    Controlling my procor-9.3x treadmill

    94 parts2
  • 4 layers110 × 90 mmURC, the printed circuit board in 3D

    URC

    spikonado/URC

    Universal Robot Controller

    180 parts2CERN-OHL-W-2.0
  • 4 layers60 × 60 mmB VNH5019ATR W ENC ELITE BRK R1.0, the printed circuit board in 3D

    B VNH5019ATR W ENC ELITE BRK R1.0

    Boardoza/Boardoza_VNH5019ATR_w-Enc_Elite_Breakout_Board

    High-power H-bridge motor driver breakout board based on STMicroelectronics VNH5019A-E with integrated encoder interface and thermal heatsink design.

    32 parts1CC-BY-SA-4.0

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the SN74LVC1G126DBVR-TP?

Yes. The symbol is 74xGxx:74LVC1G126 and the footprint Package_TO_SOT_SMD:SOT-23-5, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the SN74LVC1G126DBVR-TP?

SOT-23-5, with 5 pins. Its footprint is drawn on this page.

Where is the SN74LVC1G126DBVR-TP datasheet?

TECH PUBLIC publishes it: the Datasheet link on this page opens it.

Where can I order the SN74LVC1G126DBVR-TP?

JLCPCB lists it as part C46472327, with 14,336 in stock; the sellers' links on this page open their listings.

What can replace the SN74LVC1G126DBVR-TP?

Parts like it in the library: the SN74LV1T125DBV by Texas Instruments, the SN74LVC1G17DBVR-JSM by JSMSEMI, the SN74LVC1G07DBVR-JSM by JSMSEMI and the SN74LVC1G34DBVR-JSM by JSMSEMI. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the SN74LVC1G126DBVR-TP?

21 boards in 18 repositories on GitHub; the most starred are listed on this page, with their KiCad files.