
Elec DCDC
pollen-robotics/elec_grabette
Set of electronic boards for Grabette/Gripette

Set of electronic boards for Grabette/Gripette
Elec gripette hub and dyn is an open-source printed circuit board by pollen-robotics, from the pollen-robotics/elec_grabette repository on GitHub, published under the Apache-2.0 licence. It is a 4-layer board of 65 × 30 mm with 122 parts on 76 nets, routed with 750 tracks and 91 vias.
It is built around the SN74LVC1G125DBV, SN74LVC1G126DBVR-TP and AP63205WU, with the CH343P, TPS54560BDDA and 24C02S among its other parts. Its parts include 39 resistors, 27 capacitors, 12 diodes, 12 connectors and 11 ICs.
This repository is part of the "Grabette" project. It gathers several small PCBs of Grabette/Gripette.
Grapette is the data acquisition side.
It is based on a battery-powered Raspberry PI 4 plus a HAT to which a serie of sensing elements is added. Camera, Stereo Camera, angle sensors, IMU (included on the HAT) and a button + a LED as user interface.
Gripette is the actuator side.
It also gathers data with the same Camera/Stereo Camera system and drive motors. The "under-HAT" electronic board is associated to a Raspberry PI zero 2W. It has a interface to the motors (now Feetech wiring). A Bulk-head board makes the mechanical interface with the arm that holds Gripette.
Bulk-head:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R8, R10, R11, R13, R14, R35, R36, R38, R39 |
| 9 | 100n | Capacitor_SMD:C_0603_1608Metric | C2, C4, C6, C7, C8, C21, C22, C23, C24 |
| 7 | 0R | Resistor_SMD:R_0402_1005Metric | R2, R17, R25, R29, R33, R34, R41 |
| 5 | LED_Small | LED_SMD:LED_0603_1608Metric | D2, D4, D5, D6, D7 |
| 4 | 1u | Capacitor_SMD:C_0603_1608Metric | C3, C5, C25, C26 |
| 4 | M2,5 x 4mm spacer | LCSC_parts_lib:SMD_BD5.6-D4.1_spacer | H4, H5, H6, H7 |
| 4 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP5, TP6, TP7, TP8 |
| 3 | 10u 35V | Library_Pollen:CP_Elec_6.3x7.7 | C9, C10, C11 |
| 3 | 330R | Resistor_SMD:R_0402_1005Metric | R4, R5, R9 |
| 3 | DNP Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2, FID3 |
| 3 | Pogo-pin 4mm | LCSC_parts_lib:CONN-TH_YZ95315064P-01_pogo | J10, J13, J14 |
| 2 | 100R thermistor | Resistor_SMD:R_0603_1608Metric | TH1, TH2 |
| 2 | 100n | Capacitor_SMD:C_0402_1005Metric | C13, C14 |
| 2 | 150R | Resistor_SMD:R_0402_1005Metric | R15, R40 |
| 2 | 20k | Resistor_SMD:R_0402_1005Metric | R12, R37 |
| 2 | 22u 16V | Capacitor_SMD:CP_Elec_4x5.4 | C16, C18 |
| 2 | 22u 6V3 | Capacitor_SMD:C_0603_1608Metric | C15, C17 |
| 2 | 5V1 | Diode_SMD:D_SOD-323 | D8, D12 |
| 2 | 5k1 | Resistor_SMD:R_0402_1005Metric | R6, R7 |
| 2 | 6,8u 3A | Inductor_SMD:L_Bourns_SRN6045TA | L1, L2 |
| 2 | B5819WS | Diode_SMD:D_SOD-323 | D9, D11 |
| 2 | DNP | Resistor_SMD:R_0402_1005Metric | R30, R31 |
| 2 | DNP - Pogo-pin 4mm | LCSC_parts_lib:CONN-TH_YZ95315064P-01_pogo | J3, J6 |
| 2 | DNP-0R | Resistor_SMD:R_0603_1608Metric | R23, R24 |
| 2 | Feetech | Connector_Molex:Molex_SPOX_5267-03A_1x03_P2.50mm_Vertical | J5, J9 |
| 2 | MMBT3906 | Package_TO_SOT_SMD:SOT-23 | Q1, Q3 |
| 2 | Pogo-pin 2A 4mm | LCSC_parts_lib:CONN-TH_YZ08415060P-02_pogo | J7, J8 |
| 2 | SN74LVC1G125DBV | Package_TO_SOT_SMD:SOT-23-5 | U4, U6 |
| 2 | SN74LVC1G126DBVR | Package_TO_SOT_SMD:SOT-23-5 | U5, U10 |
| 1 | 0R | Resistor_SMD:R_0603_1608Metric | R28 |
| 1 | 100R | Resistor_SMD:R_0402_1005Metric | R27 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R16 |
| 1 | 100n 6V3 | Capacitor_SMD:C_0402_1005Metric | C20 |
| 1 | 10u | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 16k9 | Resistor_SMD:R_0402_1005Metric | R18 |
| 1 | 243k | Resistor_SMD:R_0402_1005Metric | R32 |
| 1 | 24C02S | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | 2k7 | Resistor_SMD:R_0402_1005Metric | R3 |
| 1 | 3,3u 35V | Capacitor_SMD:C_0805_2012Metric | C27 |
| 1 | 47p | Capacitor_SMD:C_0402_1005Metric | C19 |
| 1 | 4n7 | Capacitor_SMD:C_0402_1005Metric | C12 |
| 1 | 62k | Resistor_SMD:R_0402_1005Metric | R21 |
| 1 | 7k5 | Resistor_SMD:R_0402_1005Metric | R26 |
| 1 | 8k2 | Resistor_SMD:R_0402_1005Metric | R22 |
| 1 | AP63205 | Package_TO_SOT_SMD:TSOT-23-6 | U7 |
| 1 | BAT54W | Package_TO_SOT_SMD:SOT-323_SC-70 | D1 |
| 1 | CH343P | Package_DFN_QFN:WCH_QFN-16-1EP_3x3mm_P0.5mm_EP1.8x1.8mm | U3 |
| 1 | DNP Logo Pollen 2021 | Library_Pollen:Logo_Pollen_2021_sq | H3 |
| 1 | D_Schottky 3A | Diode_SMD:D_SMA | D10 |
| 1 | FE1.1s_24-Pin_WQFN | Package_DFN_QFN:WQFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U1 |
| 1 | Header 3 | Connector_PinHeader_1.27mm:PinHeader_1x03_P1.27mm_Vertical | J4 |
| 1 | JST EH 2 | Connector_JST:JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical | J2 |
| 1 | LM5050-1 | Package_TO_SOT_SMD:TSOT-23-6 | U8 |
| 1 | Logo HF 2025 | Library_Pollen:Logo_HF_2025 | H2 |
| 1 | MCP1700x-330xxTT | Package_TO_SOT_SMD:SOT-23 | U11 |
| 1 | SI2312CDS-T1-GE3 | Package_TO_SOT_SMD:TSOT-23 | Q2 |
| 1 | SP0503BAHT | Package_TO_SOT_SMD:SOT-143 | D3 |
| 1 | TPS54560BDDA | Package_SO:Texas_R-PDSO-G8_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalVias | U9 |
| 1 | pico4 | Connector_Molex:Molex_PicoBlade_53047-0410_1x04_P1.25mm_Vertical | J1 |

pollen-robotics/elec_grabette
Set of electronic boards for Grabette/Gripette

pollen-robotics/elec_grabette
Set of electronic boards for Grabette/Gripette

pollen-robotics/elec_grabette
Set of electronic boards for Grabette/Gripette

pollen-robotics/elec_grabette
Set of electronic boards for Grabette/Gripette

pollen-robotics/elec_grabette
Set of electronic boards for Grabette/Gripette

modewang/elec_RPI_Robot_HAT
The RPIRobotHAT can be power from 5 to 28V. It is designed to use of the motor connector as an power input.

armature-ai-labs/indieduck
Open robot prototype: editable FreeCAD CAD, printable parts and fit-test documentation. Adapted from Open Duck Mini.

jyg9/microduck-community-kit
补充microduck缺少的硬件电路和固件,另外配套一些测试工具。imu_to_dxl;banana_pcb;microduck复刻


makerspacelt/wifi-voltmeter
Dev NOTE: before commit, run ./kibot.sh to regenerate documentation, bom, gerbers and other assets.

LMWB/Pasta-alla-Norma
Circular shaped RGB-LED PCB with integrated Microcontroller and EEPROM


L0czek/rakieta
The starter board provides the ignition impulse to fire the engine. It includes an I2C IO expander and an 8-channel digital comparator to require a correct safety byte/address to be present before firing.
It measures 65 × 30 mm and has 4 copper layers, 1.53 mm thick.
122 parts, built around the SN74LVC1G125DBV, SN74LVC1G126DBVR-TP, AP63205WU and CH343P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the pollen-robotics/elec_grabette repository on GitHub, at the commit this page was made from: the board is elec_gripette_hub_and_dyn/elec_gripette_hub_and_dyn.kicad_pcb and its schematic elec_DCDC/elec_DCDC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).