

Imu to dxl 10p
- Size
- 141.9 × 72.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 897
- Nets
- 71
- Pads
- 2,427
- Tracks, vias
- 5,920, 1,220
- Pours
- 20
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 28 Sep 2026
- Updated
- 30 Oct 2026
Overview
Imu to dxl 10p is an open-source printed circuit board by yilv1982, from the yilv1982/duck-robot repository on GitHub. It is a 2-layer board of 141.9 × 72.9 mm with 897 parts on 71 nets, routed with 5,920 tracks and 1,220 vias.
It is built around the GD32F303CCT6, SN74LVC1G125DBV and SN74LVC1G126DBVR-TP, with the LSM6DSV16XTR, ME6211C18M5G-N and LAIL-PZ2.54-4P-L among its other parts. Its parts include 330 resistors, 200 capacitors, 60 ICs, 60 connectors and 20 diodes. It belongs with the sensors and measurement boards of this library.
Main components
11GD32F303CCT6
LQFP-48(7x7)120MHz 12bit 12bit 2.6V~3.6V 256KB 37 ARM Cortex-M4 FLASH LQFP-48(7x7) Microcontrollers (MCU/MPU/SOC) ROHSGigaDeviceMicrocontrollers (MCU/MPU/SOC)SN74LVC1G125DBV
SOT-23-5-40℃~+125℃ 1 1 1.65V~5.5V 10uA 3.7ns@3.3V,15pF 32mA 32mA 74LVC Tri-State Unidirectional SOT-23-5 Buffers, Drivers, Receivers, Transceivers ROHSTexas InstrumentsSpecialty LogicSN74LVC1G126DBVR-TP
SOT-23-5-40℃~+125℃ 1 1 1.65V~5.5V 10uA 32mA 32mA 74LVC 9ns@5V,50pF Power-off isolation、Output enable Tri-State Unidirectional SOT-23-5 Buffers, Drivers, Receivers, Transceivers ROHSTECH PUBLICBuffers, Drivers, Receivers, TransceiversLSM6DSV16XTR
LGA-14-40℃~+85℃ 1.71V~3.6V 2.6uA 4.5KB IMU (accelerometer + gyroscope) SPI、I2C X,Y,Z X,Y,Z ±16g ±4000dps 运动事件检测、同步与时间戳 LGA-14(2.5x3) Accelerometers ROHSSTMicroelectronicsAccelerometersME6211C18M5G-N
SOT-23-5-40℃~+150℃@(Ta) 1 1.8V 200mV@(100mA)、400mV@(200mA) 300mA 30uA 50uVrms 6V 70dB@(1kHz) Enable、Short Circuit Protection Fixed Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMICRONEVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsLAIL-PZ2.54-4P-L
插件,P=2.54mm-25℃~+80℃ 1 1x4P 2.54mm 2.5mm 250V 3A 3mm 4P 6mm Black Brass Gold Square pin Through Hole Plugin,P=2.54mm Pin Headers ROHSLAILANPin HeadersB3B-PH-K-S(LF)(SN)
插件,P=2mm-25℃~+85℃ 1 100V 1x3P 2A 2mm 3 3P 4.5mm 6mm 7.9mm Brass K Pin PA66 PH Through Hole Tin UL94V-0 White 插件,P=2mm Wire To Board Connector ROHSJSTWire To Board ConnectorMMBT3906
SOT-23-55℃~+150℃ 1 PNP 100 100nA 200mA 200mW 300MHz 300mV 40V 5V PNP SOT-23 Bipolar (BJT) ROHSTWGMCBipolar (BJT)PZ254V-11-05P
插件,P=2.54mm-40℃~+105℃ 1 1x5P 2.54mm 2.5mm 250V 3A 3mm 5P 6.1mm Black Brass Gold Square pin Through Hole Plugin,P=2.54mm Pin Headers ROHSXFCNPin HeadersSMAJ24A
DO-214AC(SMA)-55℃~+150℃ 10.3A 24V 26.7V 38.9V 400W 5uA TVS Unidirectional DO-214AC(SMA) ESD and Surge Protection (TVS/ESD) ROHSGOODWORKESD And Surge Protection (TVS/ESD)XL2EL89CSI-111YLC-12M
SMD3225-4P-40℃~+85℃ 12MHz 20pF 80Ω Crystal Oscillator ±10ppm ±20ppm SMD3225-4P Crystals ROHSYXCCrystals
README
references/microduck-community-kit/hardware/dxl_hub/README.md"dxl_hub" 电力与数据分发板子
"dxl_hub" 固定在机器鸭身体中舵机上方的板子。用于把电池电力分配到左右腿、头部和IMU。对单总线串口数据信号进行合并。
- 根据需要焊接飞特1910舵机接口或XL330舵机接口,二选一。
- 插座参考型号:
- XL330用:B3B-EH-A(LF)(SN),立式,只能焊接在背面
- 飞特1910立式用:A2007WV-3P
- 飞特1910卧式用:A2007WR-3P
其他信息
- 使用KiCAD 9设计。
Parts
897| Qty | Value | Footprint | References |
|---|---|---|---|
| 140 | 51R | microduck:R0402 | R10, R10, R10, R10, R10, R10, R10, R10, R10, R10, R11, R11, R11, R11, R11, R11 +124 |
| 110 | 100nF/16V | microduck:C0402 | C12, C12, C12, C12, C12, C12, C12, C12, C12, C12, C13, C13, C13, C13, C13, C13 +94 |
| 50 | 10K | microduck:R0402 | R15, R15, R15, R15, R15, R15, R15, R15, R15, R15, R16, R16, R16, R16, R16, R16 +34 |
| 40 | 1.8mm螺丝孔 | microduck:pad | J1, J1, J1, J1, J1, J1, J1, J1, J1, J1, J2, J2, J2, J2, J2, J2 +24 |
| 40 | 10k | microduck:R0402 | R27, R27, R27, R27, R27, R27, R27, R27, R27, R27, R28, R28, R28, R28, R28, R28 +24 |
| 30 | 27pF/50V | microduck:C0402 | C10, C10, C10, C10, C10, C10, C10, C10, C10, C10, C11, C11, C11, C11, C11, C11 +14 |
| 20 | 0R | microduck:R0402 | R9, R9, R9, R9, R9, R9, R32, R32, R32, R32, R32, R32, R32, R32, R32, R32 +4 |
| 20 | 1uF/10V | microduck:C0402 | C20, C20, C20, C20, C20, C20, C20, C20, C20, C20, C21, C21, C21, C21, C21, C21 +4 |
| 20 | LAIL-PZ2.54-4P-L | microduck:pad-4 | H1, H1, H1, H1, H1, H1, H1, H1, H1, H1, H3, H3, H3, H3, H3, H3 +4 |
| 10 | 0R | microduck:R0402_Jumper | R33, R33, R33, R33, R33, R33, R33, R33, R33, R33 |
| 10 | 100K | microduck:R0402 | R3, R3, R3, R3, R3, R3, R3, R3, R3, R3 |
| 10 | 100R | microduck:R0603 | R5, R5, R5, R5, R5, R5, R5, R5, R5, R5 |
| 10 | 100p | microduck:C0402 | C1, C1, C1, C1, C1, C1, C1, C1, C1, C1 |
| 10 | 10uF/50V | microduck:C0805 | C6, C6, C6, C6, C6, C6, C6, C6, C6, C6 |
| 10 | 10uH/920mA | microduck:IND-SMD_L3.0-W3.0_SWPA3010S | L1, L1, L1, L1, L1, L1, L1, L1, L1, L1 |
| 10 | 1K | microduck:R0402 | R14, R14, R14, R14, R14, R14, R14, R14, R14, R14 |
| 10 | 1nF/50V | microduck:C0402 | C22, C22, C22, C22, C22, C22, C22, C22, C22, C22 |
| 10 | 20k | microduck:R0402 | R29, R29, R29, R29, R29, R29, R29, R29, R29, R29 |
| 10 | 22uF/6.3V | microduck:C0603 | C5, C5, C5, C5, C5, C5, C5, C5, C5, C5 |
| 10 | 24K | microduck:R0402 | R6, R6, R6, R6, R6, R6, R6, R6, R6, R6 |
| 10 | 3.3V ESD | microduck:SOD-323_L1.7-W1.3-LS2.5-BI | D2, D2, D2, D2, D2, D2, D2, D2, D2, D2 |
| 10 | 30K | microduck:R0402 | R4, R4, R4, R4, R4, R4, R4, R4, R4, R4 |
| 10 | 75K | microduck:R0402 | R1, R1, R1, R1, R1, R1, R1, R1, R1, R1 |
| 10 | B3B-EH-A (LF)(SN) | microduck:CONN-TH_B3B-EH-A-LF-SN | CN1, CN1, CN1, CN1, CN1, CN1, CN1, CN1, CN1, CN1 |
| 10 | B3B-PH-K-S(LF)(SN) | microduck:CONN-TH_B3B-PH-K-S | CN2, CN2, CN2, CN2, CN2, CN2, CN2, CN2, CN2, CN2 |
| 10 | ETA2845S2G_C22362741 | microduck:SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BR | U1, U1, U1, U1, U1, U1, U1, U1, U1, U1 |
| 10 | GD32F303CCT6 | microduck:LQFP-48_L7.0-W7.0-P0.50-LS9.0-BL | U2, U2, U2, U2, U2, U2, U2, U2, U2, U2 |
| 10 | LSM6DSV16XTR | microduck:LGA-14_L3.0-W2.5-P0.50-BR | U3, U3, U3, U3, U3, U3, U3, U3, U3, U3 |
| 10 | ME6211C18M5G-N | microduck:SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BR | U6, U6, U6, U6, U6, U6, U6, U6, U6, U6 |
| 10 | MMBT3906 | Package_TO_SOT_SMD:SOT-23 | Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q1, Q1 |
| 10 | PTC(40R) | microduck:F0603 | F1, F1, F1, F1, F1, F1, F1, F1, F1, F1 |
| 10 | PZ254V-11-05P | microduck:pad-5 | H2, H2, H2, H2, H2, H2, H2, H2, H2, H2 |
| 10 | SMAJ24A | microduck:SMA_L4.4-W2.6-LS5.0-RD | D1, D1, D1, D1, D1, D1, D1, D1, D1, D1 |
| 10 | SN74LVC1G125DBV | Package_TO_SOT_SMD:SOT-23-5 | U5, U5, U5, U5, U5, U5, U5, U5, U5, U5 |
| 10 | SN74LVC1G126DBVR | Package_TO_SOT_SMD:SOT-23-5 | U4, U4, U4, U4, U4, U4, U4, U4, U4, U4 |
| 10 | XL2EL89CSI-111YLC-12M | microduck:CRYSTAL-SMD_4P-L3.2-W2.5-BL | X1, X1, X1, X1, X1, X1, X1, X1, X1, X1 |
The 740 most common of 897 parts.
More from yilv1982/duck-robot
4- 2 layers27.1 × 30.2 mm

- 4 layers65 × 30 mm

- 4 layers65 × 30 mm

- 2 layers22.3 × 28.2 mm

Similar boards
- 2 layers141.9 × 72.9 mm

Imu to dxl 10p
jyg9/microduck-community-kit
补充microduck缺少的硬件电路和固件,另外配套一些测试工具。imu_to_dxl;banana_pcb;microduck复刻
897 parts28Apache-2.0 - 4 layers65 × 30.9 mm

Elec RPI Robot HAT
armature-ai-labs/indieduck
Open robot prototype: editable FreeCAD CAD, printable parts and fit-test documentation. Adapted from Open Duck Mini.
132 partsApache-2.0 - 4 layers65 × 30 mm

Elec gripette hub and dyn
pollen-robotics/elec_grabette
Set of electronic boards for Grabette/Gripette
122 parts11Apache-2.0 - 4 layers65 × 30.9 mm

Elec RPI Robot HAT
modewang/elec_RPI_Robot_HAT
The RPIRobotHAT can be power from 5 to 28V. It is designed to use of the motor connector as an power input.
127 partsApache-2.0 - 4 layers78 × 59 mm

- 4 layers32 × 24 mm

SCH ESP32-P4 FUNCTION EV BOARD MIPI Camera Sub V1.1 20240529
OHNope/ESP32-P4X_MIPI_Camera_Sub_V1.1_KiCAD
The KiCAD project for ESP32-P4_FUNCTION_EV_BOARD_MIPI_Camera_Sub_V1.1_20240529
32 parts2 - 4 layers

- 4 layers160 × 100 mm

Smu main
PaulBichl/vibepcb-smu
VibePCB example: 4-quadrant SMU (+-30 V / +-1 A, USB-C PD, Ethernet) designed with an LLM
244 parts1
Questions
How big is the Imu to dxl 10p PCB?
It measures 141.9 × 72.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Imu to dxl 10p use?
897 parts, built around the GD32F303CCT6, SN74LVC1G125DBV, SN74LVC1G126DBVR-TP and LSM6DSV16XTR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Imu to dxl 10p KiCad files?
From the yilv1982/duck-robot repository on GitHub, at the commit this page was made from: the board is references/microduck-community-kit/hardware/imu_to_dxl/imu_to_dxl_10p.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Imu to dxl 10p design in my own project?
Its repository states no licence, so its author keeps all rights: ask yilv1982 before reusing the design.