Skip to the content
2 layersLmwb RGB Ball, the printed circuit board in 3D

Circular shaped RGB-LED PCB with integrated Microcontroller and EEPROM

Copper layers
2
Thickness
1.6 mm
Parts
41
Nets
32
Pads
126
Tracks, vias
239, 47
Pours
3
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
28 Aug 2025
Updated
16 Jan 2026

Overview

Lmwb RGB Ball is an open-source printed circuit board by LMWB, from the LMWB/Pasta-alla-Norma repository on GitHub, published under the MIT licence. It is a 2-layer board with 41 parts on 32 nets, routed with 239 tracks and 47 vias.

It is built around the STM32C011F6P6, 24C02S and AMS1117-3.3, with the WS2812B and US1D among its other parts. Its parts include 19 capacitors, 9 diodes, 4 resistors, 3 ICs and 3 connectors. It belongs with the lEDs and displays boards and the STM32 boards of this library.

Main components

5

README

README.md

Pasta_alla_Norma

Circular shaped RGB-LED PCB with integrated Microcontroller and EEPROM

cubeIDE Setting for evaluate used flash size

arm-none-eabi-nm --size-sort --print-size "RGB_Ring_LimbusZero.elf" > "RGB_Ring_LimbusZero.sizes"

  • T / t → Flash (code)
  • R / r → Flash (read-only const)
  • D / d → RAM (with init in Flash)
  • B / b → RAM only (zero-init)
  • W / w → Weak (depends where resolved, often Flash functions)

Fassung

E27 bedeutet Edison Fassung 27 mm (siehe Zeichnung).
Ein zylindrischer Stempel der in die Fassung passt ohne Gewinde, sollte 30mm Lange haben und 24mm Durchmesser.

Parts

41
QtyValueFootprintReferences
14100nCapacitor_SMD:C_0805_2012MetricC3, C6, C7, C8, C9, C10, C11, C12, C13, C14, C15, C17, C18, C19
8WS2812BLED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mmD1, D3, D4, D5, D6, D7, D8, D9
310kResistor_SMD:R_0805_2012MetricR1, R2, R3
322uCapacitor_SMD:C_0805_2012MetricC1, C5, C16
21uCapacitor_SMD:C_0805_2012MetricC2, C4
2Conn_01x03Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ1, J2
2MountingHole_PadMountingHole:MountingHole_4.3mm_M4_PadH1, H2
10Resistor_SMD:R_0805_2012MetricR4
124C02SPackage_TO_SOT_SMD:SOT-23-5U2
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U1
1STM32C011F6P6Package_SO:TSSOP-20_4.4x6.5mm_P0.65mmU3
1SolderJumper_3_OpenJumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mmJP1
1US1DDiode_SMD:D_SMAD2
1~WE-SKEDD_WR-WST(rev19b):490107670412_DEBUGGINGJ3

Similar boards

  • 4 layers65 × 30 mmElec gripette hub and dyn, the printed circuit board in 3D

    Elec gripette hub and dyn

    pollen-robotics/elec_grabette

    Set of electronic boards for Grabette/Gripette

    122 parts11Apache-2.0
  • 2 layers40 × 65 mmWifi voltmeter, the printed circuit board in 3D

    Wifi voltmeter

    makerspacelt/wifi-voltmeter

    Dev NOTE: before commit, run ./kibot.sh to regenerate documentation, bom, gerbers and other assets.

    60 parts2CERN-OHL-S-2.0
  • 2 layers100.9 × 144.5 mmSinthinator, the printed circuit board in 3D

    Sinthinator

    phenax/sinthinator

    A capacitive touch slider based music instrument

    57 parts1
  • 2 layers62.7 × 44.4 mmDRM Watch v3, the printed circuit board in 3D

    DRM Watch v3

    drfailov/DRM_Watch_v3

    DRM Watch 3 - Наручний годинник з дисплеєм SHARP Memory LCD

    116 parts92GPL-3.0
  • 2 layers68.6 × 53.3 mmLmwb ds18b20, the printed circuit board in 3D

    Lmwb ds18b20

    LMWB/Quattro-Formaggi

    One Wire Temperatur Sensor Breakoutboard and C-Library

    33 partsMIT
  • 2 layers73.7 × 43.2 mmCarte protection, the printed circuit board in 3D

    Carte protection

    Pokibot-org/pokibot_elec

    38 partsApache-2.0
  • 2 layers49.5 × 29 mmXESC YF r4, the printed circuit board in 3D

    XESC YF r4

    ClemensElflein/xESC_YF_rev4-adapter

    [![Contributors][contributors-shield]][contributors-url] [![Forks][forks-shield]][forks-url] [![Stargazers][stars-shield]][stars-url] [![Issues][issues-shield]][issues-url] [![MIT License][license-shield]][license-url]

    54 parts2MIT

Questions

What parts does the Lmwb RGB Ball use?

41 parts, built around the STM32C011F6P6, 24C02S, AMS1117-3.3 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Lmwb RGB Ball KiCad files?

From the LMWB/Pasta-alla-Norma repository on GitHub, at the commit this page was made from: the board is Hardware/lmwb_RGB_Ball.kicad_pcb and its schematic Hardware/lmwb_RGB_Ball.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Lmwb RGB Ball design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).