
Root
GonzaCerv/noah-hardware
This repo contains all the hardware description for the Noah project. Here lies 3D models, electronics PCB and Firmware software of the robot.
Boards in 56 GitHub repositories, designed in KiCad, that use the ROB-14450 by SparkFun Electronics (Power Management - Modules ROHS). See how each wires it, with its parts, size, README and files; the ROB-14450’s symbol, footprint and pinout are on its own page.

GonzaCerv/noah-hardware
This repo contains all the hardware description for the Noah project. Here lies 3D models, electronics PCB and Firmware software of the robot.

bonavirak/Line-Follower-Robot-Using-STM32F103C8T6-with-TCRT-5000
Line Follower Robot powered by STM32F103C8T6 microcontroller, using TCRT5000 5-way sensors for line detection, HC-05 for Bluetooth communication, TB6612FNG motor driver, and N20 motors (1000 RPM).

0x23/BallJointEmbossingMachine
A motorized linear embossing machine designed to precisely press ball joints. It was designed to automate the production of balljoint linkages for the Open-Micro-Manipulator.


team-mountaineers-urc-2023/electronics
Block diagrams, schematics, and PCB files related to the electronics subteam





Sreeram-Ramesh/Pravega
Pravega, which translates to "great speed" in Sanskrit is an autonomous high-speed line follower robot that currently works on the PID control algorithm.


ahmedm0007/DeskMate-Robot
DeskMate is an end-of-year engineering project built at INSAT (National Institute of Applied Science and Technology, Tunis). It addresses a concrete problem: study sessions are rarely as effective as they should be.

anbu-05/Robotic-Arm
a modified-servo based robotic arm project, currently under works

BryanFarras/Desain-Proyek-2
Autonomous Evacuation Rover (AER) is an integrated mobile robotics platform developed for autonomous exploration, mapping, hazard detection, and evacuation assistance in unknown or hazardous indoor environments.

CassioSStella/Robo-Sumo_Eletronica
Seção de eletrônica para o desenvolvimento de um robô de sumo como parte de atividade de trainee da equipe PatoBots

choicebuilds/automatic-storage-unit
A 1 layer PCB built from scratch within 36 hours in the RoboTechs hackathon using an ESP32, fabricated using the LPKF Protomat and Protolaser.

coffee2307/Tessera
Tessera is a personal precision motion platform for compact XYZ positioning, alignment, probing, microscopy, and small-scale automation.

Crriminson/Unplugged
High-efficiency KiCad schematic and PCB design for a Line Follower Car control system, built around the Round 2 challenge constraints.

cszcszczs/robots
Este repositorio se utilizara para llevar las versiones de los robots, velocista y sumo.


hadoopmarc/gps-controlled-lcd-shutter
Create a GPS locked waveform to drive an LCD panel used for meteor photography


HusseinAlwali/autonomous-seed-planting-robot
Solar-powered autonomous seed-planting rover - ESP32 firmware, Android planner app, custom KiCad PCB, and 3D-printed mechanics. My graduation project.
