

VL esquematico
- Size
- 60 × 80 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 38
- Pads
- 81
- Tracks, vias
- 220, 8
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 13 Oct 2026
- Updated
- 26 Oct 2026
Overview
VL esquematico is an open-source printed circuit board by IsraelMorant, from the IsraelMorant/Victory-Lap repository on GitHub. It is a 2-layer board of 60 × 80 mm with 11 parts on 38 nets, routed with 220 tracks and 8 vias.
It is built around the ROB-14450 and MP1584EN. Its parts include 3 ICs, 3 connectors, 2 resistors and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J1, J2 |
| 1 | 1kohms | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal | R1 |
| 1 | 2kohms | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | Arduino_Nano_v2.x | Module:Arduino_Nano | A1 |
| 1 | Battery Lipo 7.6v | TerminalBlock_Philmore:TerminalBlock_Philmore_TB132_1x02_P5.00mm_Horizontal | BAT1 |
| 1 | HM10_BLT | TerminalBlock:TerminalBlock_MaiXu_MX126-5.0-04P_1x04_P5.00mm | J3 |
| 1 | MP1584 | MP1584:DC-BRICK | U4 |
| 1 | QTR-8A | QTR-8A:QTR-8A | U1 |
| 1 | ROB-14450 | ROB-14450:MODULE_ROB-14450 | U2 |
| 1 | SW_DPST_x2 | RF1-1A-DC-2-R-1:SW_RF1-1A-DC-2-R-1 | SW1 |
More from IsraelMorant/Victory-Lap
1- 2 layers

Similar boards
- 2 layers120 × 100 mm

Root
GonzaCerv/noah-hardware
This repo contains all the hardware description for the Noah project. Here lies 3D models, electronics PCB and Firmware software of the robot.
127 parts28MIT - 2 layers102.6 × 82 mm

Fun
bonavirak/Line-Follower-Robot-Using-STM32F103C8T6-with-TCRT-5000
Line Follower Robot powered by STM32F103C8T6 microcontroller, using TCRT5000 5-way sensors for line detection, HC-05 for Bluetooth communication, TB6612FNG motor driver, and N20 motors (1000 RPM).
38 parts11MIT - 2 layers42 × 42 mm

ControllerBoardSingle v1
0x23/BallJointEmbossingMachine
A motorized linear embossing machine designed to precisely press ball joints. It was designed to automate the production of balljoint linkages for the Open-Micro-Manipulator.
20 parts9MIT - 2 layers90 × 102 mm

- 4 layers156.8 × 127 mm

Payload PCB v3.1
team-mountaineers-urc-2023/electronics
Block diagrams, schematics, and PCB files related to the electronics subteam
197 parts2BSD-3-Clause - 2 layers100 × 70.9 mm

- 2 layers75.6 × 50.2 mm

- 2 layers87.2 × 93.9 mm

Questions
How big is the VL esquematico PCB?
It measures 60 × 80 mm and has 2 copper layers, 1.6 mm thick.
What parts does the VL esquematico use?
11 parts, built around the ROB-14450 and MP1584EN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the VL esquematico KiCad files?
From the IsraelMorant/Victory-Lap repository on GitHub, at the commit this page was made from: the board is Esquematico_de_VL/VL-esquematico/_restore_backup_2026-10-25T17-16-22-204/VL-esquematico.kicad_pcb and its schematic Esquematico_de_VL/VL-esquematico/VL-esquematico.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the VL esquematico design in my own project?
Its repository states no licence, so its author keeps all rights: ask IsraelMorant before reusing the design.