
Self Balancing Bot
Shantu-2580/Prototypes
A two-wheeled self-balancing robot using ESP32, MPU6050 (accelerometer + gyroscope), TB6612FNG motor driver, and Bluetooth gamepad control via Bluepad32.

a modified-servo based robotic arm project, currently under works
Robarm kicad is an open-source printed circuit board by anbu-05, from the anbu-05/Robotic-Arm repository on GitHub. It is a 2-layer board of 65 × 80 mm with 14 parts on 52 nets, routed with 255 tracks and 36 vias.
It is built around the ROB-14450 and L7805. Its parts include 7 connectors and 5 ICs. It belongs with the STM32 boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Conn_01x05_Pin | Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical | J1, J2, J3, J4, J5, J6 |
| 3 | ROB-14450 | ROB-14450:MODULE_ROB-14450 | U2, U3, U4 |
| 2 | MountingHole_3mm | MountingHole:MountingHole_3mm | M3, M3 |
| 1 | Barrel_Jack_MountingPin | Connector_BarrelJack:BarrelJack_Horizontal | J7 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U5 |
| 1 | STM32F411 BlackPill | WeAct_Black_Pill_V2.0:STM32F411_Black_Pill | U1 |

Shantu-2580/Prototypes
A two-wheeled self-balancing robot using ESP32, MPU6050 (accelerometer + gyroscope), TB6612FNG motor driver, and Bluetooth gamepad control via Bluepad32.

GonzaCerv/noah-hardware
This repo contains all the hardware description for the Noah project. Here lies 3D models, electronics PCB and Firmware software of the robot.

bonavirak/Line-Follower-Robot-Using-STM32F103C8T6-with-TCRT-5000
Line Follower Robot powered by STM32F103C8T6 microcontroller, using TCRT5000 5-way sensors for line detection, HC-05 for Bluetooth communication, TB6612FNG motor driver, and N20 motors (1000 RPM).

0x23/BallJointEmbossingMachine
A motorized linear embossing machine designed to precisely press ball joints. It was designed to automate the production of balljoint linkages for the Open-Micro-Manipulator.


team-mountaineers-urc-2023/electronics
Block diagrams, schematics, and PCB files related to the electronics subteam


It measures 65 × 80 mm and has 2 copper layers, 1.6 mm thick.
14 parts, built around the ROB-14450 and L7805. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the anbu-05/Robotic-Arm repository on GitHub, at the commit this page was made from: the board is PCB/robarm_kicad/robarm_kicad.kicad_pcb and its schematic PCB/robarm_kicad/robarm_kicad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask anbu-05 before reusing the design.