
Root
GonzaCerv/noah-hardware
This repo contains all the hardware description for the Noah project. Here lies 3D models, electronics PCB and Firmware software of the robot.

LFR PCB is an open-source printed circuit board by souptik-samanta, from the souptik-samanta/linefollower repository on GitHub. It is a 2-layer board of 90 × 75 mm with 30 parts on 40 nets, routed with 173 tracks and 0 vias.
It is built around the ROB-14450. Its parts include 15 connectors, 4 resistors, 3 capacitors, 2 ICs and 1 switch.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | jumper | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J8, J9, J10, J11, J12, J13, J14, J15, J16 |
| 3 | MountingHole_Pad | MountingHole:MountingHole_3mm_Pad_TopBottom | H1, H2, H2 |
| 2 | C | Capacitor_THT:C_Radial_D8.0mm_H7.0mm_P3.50mm | C2, C3 |
| 1 | 100 | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R3 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R4 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R1 |
| 1 | 2k | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R2 |
| 1 | 470uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | BLUETOOTH | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | I2C HEADER | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | MOTOR 1 | TerminalBlock_CUI:TerminalBlock_CUI_TB007-508-02_1x02_P5.08mm_Horizontal | J3 |
| 1 | MOTOR 2 | TerminalBlock_CUI:TerminalBlock_CUI_TB007-508-02_1x02_P5.08mm_Horizontal | J4 |
| 1 | NANO | Module:Arduino_Nano | A1 |
| 1 | POWER IN | TerminalBlock_CUI:TerminalBlock_CUI_TB007-508-02_1x02_P5.08mm_Horizontal | J5 |
| 1 | RLS08 | Connector_PinHeader_2.54mm:PinHeader_1x12_P2.54mm_Vertical | J2 |
| 1 | ROB-14450 | ROB-14450:MODULE_ROB-14450 | U1 |
| 1 | Start | Button_Switch_THT:SW_PUSH_6mm | SW1 |

GonzaCerv/noah-hardware
This repo contains all the hardware description for the Noah project. Here lies 3D models, electronics PCB and Firmware software of the robot.

bonavirak/Line-Follower-Robot-Using-STM32F103C8T6-with-TCRT-5000
Line Follower Robot powered by STM32F103C8T6 microcontroller, using TCRT5000 5-way sensors for line detection, HC-05 for Bluetooth communication, TB6612FNG motor driver, and N20 motors (1000 RPM).

0x23/BallJointEmbossingMachine
A motorized linear embossing machine designed to precisely press ball joints. It was designed to automate the production of balljoint linkages for the Open-Micro-Manipulator.


team-mountaineers-urc-2023/electronics
Block diagrams, schematics, and PCB files related to the electronics subteam



It measures 90 × 75 mm and has 2 copper layers, 1.6 mm thick.
30 parts, built around the ROB-14450. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the souptik-samanta/linefollower repository on GitHub, at the commit this page was made from: the board is LFR PCB.kicad_pcb and its schematic LFR PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask souptik-samanta before reusing the design.