
Air Quality Sensor
willem-pennings/Air-Quality-Sensor
Design files for a Home Assistant-compatible air quality sensor/monitor
Boards in 26 GitHub repositories, designed in KiCad, that use the SCD30 by Sensirion (0ppm~40000ppm 0℃~+50℃ 19mA 23mm 3.3V~5.5V 35mm 7mm Carbon dioxide Multi-gas detection capability UART、I2C、PWM ±3% - Gas Sensors ROHS). See how each wires it, with its parts, size, README and files; the SCD30’s symbol, footprint and pinout are on its own page.

willem-pennings/Air-Quality-Sensor
Design files for a Home Assistant-compatible air quality sensor/monitor

Alacrity-Education/AirBoxV2
The AirBox V2 Station is an open source air quality monitoring station based on the Sensirion SEN66 sensor. It measures particulate matter, CO2, VOC and NOx, runs on a solar charged lithium cell, and reports over Wi-Fi.

Duckle29/InKli
An ESP32-WROOM32 backpack for an SCD30. Uses a high effeciency Buck converter to try and avoid self heating.


artemist/minico2
A simple CO2 monitor based on the Sensirion SCD-30 and an ESP32. This is intended to have Wi-Fi and Ethernet thought that is not yet implemented

bboe/fug
Carrier PCB joining a WEMOS D1 Mini (ESP8266) to a Sensirion SCD30 CO2/RH/T sensor. Script-generated KiCad.

benmcnelly/walter-hardware
This repository contains all hardware information about Walter and shields

bruvv/ENV-sensor-esp32
Custom ESP32-S3 environmental sensor PCB designed for use with ESPHome and Home Assistant.



herrTechnok/Co2-Reader-ioT-replacement-Board
Co2 Reader ioT replacement Board




sankarax/AQM420
Air Quality Monitoring project which includes the Arduino script integrating everything into the Blynk IoT app, schematics and the pcb build



xtompok/home_automation_switchboard
Board fitting into wall switch, support for 1Wire, quadrature encoder, and much more. RS-485

Alacrity-Education/AirBoxV2
The AirBox V2 Station is an open source air quality monitoring station based on the Sensirion SEN66 sensor. It measures particulate matter, CO2, VOC and NOx, runs on a solar charged lithium cell, and reports over Wi-Fi.

jibonaronno/documentsA
It is required to change settings using SCLManager.exe when required for new setup.

Dorsel89/phyphox-hardware
Used components: - RGB-LED: WP154A4SEJ3VBDZGW/CA - BLE Mikrocontroller: ESP32-DEVKITC-32D - Sensor: SCD30


