

AirQualitymonitoringESP
Air Quality Monitoring project which includes the Arduino script integrating everything into the Blynk IoT app, schematics and the pcb build
- Size
- 52.7 × 48.7 mm
- Copper layers
- 2
- Thickness
- 1.67 mm
- Parts
- 20
- Nets
- 43
- Pads
- 97
- Tracks, vias
- 110, 12
- Pours
- 21
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 27 Jun 2025
- Updated
- 27 Jun 2025
Overview
AirQualitymonitoringESP is an open-source printed circuit board by sankarax, from the sankarax/AQM420 repository on GitHub. It is a 2-layer board of 52.7 × 48.7 mm with 20 parts on 43 nets, routed with 110 tracks and 12 vias.
It is built around the ESP32-C6-DEVKITM-1-N4, SCD30 and SGP41-D-R4, with the VEML6030, AMS1117-3.3 and TPD2E1B06DRLR-TP among its other parts. Its parts include 7 ICs and 1 connector. It belongs with the ESP32 and RISC-V boards of this library.
Main components
7ESP32-C6-DEVKITM-1-N4
ESP32-C6-DevKitM-1 development board with ESP32-C6-MINI-1 module.Espressif SystemsUncategorisedSCD30
-0ppm~40000ppm 0℃~+50℃ 19mA 23mm 3.3V~5.5V 35mm 7mm Carbon dioxide Multi-gas detection capability UART、I2C、PWM ±3% - Gas Sensors ROHSSensirionGas SensorsSGP41-D-R4
DFN-6(2.4x2.4)DFN-6(2.4x2.4) VOC Sensors ROHSSensirionVOC SensorsVEML6030
SMD-6P,2x2mm-25℃~+85℃ 0.87mm 120klx 16bit 2.5V~3.6V 2mm 2mm I2C Light Intensity Low power/sleep mode、Spectral correction/filtering、Adjustable gain control、Interrupt/event trigger、Built-in temperature compensation SMD-6P,2x2mm Ambient Light Sensors ROHSVishay IntertechnologyAmbient Light SensorsAMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTPD2E1B06DRLR-TP
SOT(5x3)-55℃~+125℃ 0.6pF 15V 5.5V 80nA 9.5V ESD IEC 61000-4-2、IEC 61000-4-5 SOT(5x3) ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)10104110-0001LF
SMD-30℃~+80℃ 1 1.8A 100V 5P Black Female Micro-B Surface Mount, Right Angle USB 2.0 SMD USB Connectors ROHSAmphenolUSB Connectors
Parts
20| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 10104110-0001LF | AirQualitymonitoringESP:AMPHENOL_10104110-0001LF | J2 |
| 1 | AMS1117-3.3 | AirQualitymonitoringESP:SOT-223-3_TabPin2 | U6 |
| 1 | C1 | Capacitor_SMD:C_0805_2012Metric | 0.1u1 |
| 1 | C10 | Capacitor_SMD:C_0805_2012Metric | 100n2 |
| 1 | C2 | Capacitor_SMD:C_0805_2012Metric | 10u2 |
| 1 | C3 | Capacitor_SMD:C_0805_2012Metric | 10u1 |
| 1 | C4 | Capacitor_SMD:C_0805_2012Metric | 100n1 |
| 1 | C5 | Capacitor_SMD:C_0805_2012Metric | 10u5 |
| 1 | C6 | Capacitor_SMD:C_0805_2012Metric | 100n4 |
| 1 | C7 | Capacitor_SMD:C_0805_2012Metric | 10u4 |
| 1 | C8 | Capacitor_SMD:C_0805_2012Metric | 100n3 |
| 1 | C9 | Capacitor_SMD:C_0805_2012Metric | 10u3 |
| 1 | ESP32-C6-DevKitM-1 | AirQualitymonitoringESP:ESP32-C6-DevKitM-1 | U1 |
| 1 | R1 | Resistor_SMD:R_0805_2012Metric | 4.7k1 |
| 1 | R2 | Resistor_SMD:R_0805_2012Metric | 4.7k2 |
| 1 | SCD30 | AirQualitymonitoringESP:MODULE_SCD30 | U4 |
| 1 | SGP41-D-R4 | AirQualitymonitoringESP:XDCR_SGP41-D-R4 | U3 |
| 1 | SHT40 | AirQualitymonitoringESP:SHT4X | U2 |
| 1 | TPD2E1B06DRLR | AirQualitymonitoringESP:SOTFL50P160X60-6N | U5 |
| 1 | VEML6030 | AirQualitymonitoringESP:VISHAY_VEML6030_2X2X0.87 | U7 |
Similar boards
- 2 layers68 × 38 mm

- 6 layers68.6 × 76.7 mm

- 4 layers243.8 × 243.8 mm

Cm4 matx
EDA-bench/eda-bench
Execution-based benchmark for open-book KiCad PCB reconstruction agents
214 parts4 - 4 layers110 × 140 mm

Trackball base
ntindle/trackball
Ultimate Mouse: fully custom trackball with a free-spinning active ball (capacitive touch ring, nRF52810, inductive charging) and a dual-PMW3360 base (nRF52840, USB-C, HID + custom driver). No mechanical wheel.
159 parts1 - 4 layers163 × 83 mm

Voxboard
shadedvox/arsenal
A fully custom 6 degree-of-freedom robotic arm, built from the ground up across hardware, firmware, and mechanical design.
182 parts1Apache-2.0 - 4 layers114 × 114 mm

- 4 layers28.6 × 48.5 mm

ESP32-S3 Dev
CafeAsh/DevBoards
Development board based on the ATmega32U4 microcontroller, designed for USB-enabled embedded projects, rapid prototyping, and firmware experimentation.
30 parts - 4 layers25.6 × 23.6 mm

CANNONBALL
user-will/PCB_CANNONBALL
An ESP32-C3 dev board with more sensors and features then you could know what to do with
61 parts14
Questions
How big is the AirQualitymonitoringESP PCB?
It measures 52.7 × 48.7 mm and has 2 copper layers, 1.67 mm thick.
What parts does the AirQualitymonitoringESP use?
20 parts, built around the ESP32-C6-DEVKITM-1-N4, SCD30, SGP41-D-R4 and VEML6030. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AirQualitymonitoringESP KiCad files?
From the sankarax/AQM420 repository on GitHub, at the commit this page was made from: the board is AirQualitymonitoringESP.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the AirQualitymonitoringESP design in my own project?
Its repository states no licence, so its author keeps all rights: ask sankarax before reusing the design.