Skip to the content

SCD30

SensirionExtended

0ppm~40000ppm 0℃~+50℃ 19mA 23mm 3.3V~5.5V 35mm 7mm Carbon dioxide Multi-gas detection capability UART、I2C、PWM ±3% - Gas Sensors ROHS

Part id
sensirion/SCD30
Category
Gas Sensors
Pins
1
In stock
203 at JLCPCB (C1519271)
Used on
38 open-source boards

Overview

The SCD30 is a gas Sensor made by Sensirion with 1 pins. 0ppm~40000ppm 0℃~+50℃ 19mA 23mm 3.3V~5.5V 35mm 7mm Carbon dioxide Multi-gas detection capability UART、I2C、PWM ±3% - Gas Sensors ROHS.

203 are in stock at JLCPCB (part C1519271). 38 open-source boards in 26 repositories on GitHub use it.

Symbol

The library has no symbol for this part yet.

Footprint

The library has no footprint for this part yet.

Open-source boards using it

38See all 38
  • 2 layers100 × 100 mmAir Quality Sensor, the printed circuit board in 3D

    Air Quality Sensor

    willem-pennings/Air-Quality-Sensor

    Design files for a Home Assistant-compatible air quality sensor/monitor

    17 parts12
  • 2 layers114.2 × 36.8 mmAirbox, the printed circuit board in 3D

    Airbox

    Alacrity-Education/AirBoxV2

    The AirBox V2 Station is an open source air quality monitoring station based on the Sensirion SEN66 sensor. It measures particulate matter, CO2, VOC and NOx, runs on a solar charged lithium cell, and reports over Wi-Fi.

    68 parts6GPL-3.0
  • 2 layers59.2 × 39.4 mmScd30 esp, the printed circuit board in 3D

    Scd30 esp

    Duckle29/InKli

    An ESP32-WROOM32 backpack for an SCD30. Uses a high effeciency Buck converter to try and avoid self heating.

    63 parts1
  • 2 layers120 × 100 mmEnvSensor v2, the printed circuit board in 3D

    EnvSensor v2

    jakubprzybytek/Environmental-Sensors

    162 parts1
  • 2 layers60 × 60 mmMinico2, the printed circuit board in 3D

    Minico2

    artemist/minico2

    A simple CO2 monitor based on the Sensirion SCD-30 and an ESP32. This is intended to have Wi-Fi and Ethernet thought that is not yet implemented

    46 parts
  • 2 layers36 × 57 mmFug, the printed circuit board in 3D

    Fug

    bboe/fug

    Carrier PCB joining a WEMOS D1 Mini (ESP8266) to a Sensirion SCD30 CO2/RH/T sensor. Script-generated KiCad.

    13 partsCC-BY-SA-4.0
  • 4 layers94 × 94 mmWalter feels, the printed circuit board in 3D

    Walter feels

    benmcnelly/walter-hardware

    This repository contains all hardware information about Walter and shields

    154 partsGPL-3.0
  • 4 layers55 × 70 mmEnvsensor, the printed circuit board in 3D

    Envsensor

    bruvv/ENV-sensor-esp32

    Custom ESP32-S3 environmental sensor PCB designed for use with ESPHome and Home Assistant.

    9 partsGPL-3.0

Questions

Where is the SCD30 datasheet?

Sensirion publishes it: the Datasheet link on this page opens it.

Where can I order the SCD30?

JLCPCB lists it as part C1519271, with 203 in stock; the sellers' links on this page open their listings.

Which open-source boards use the SCD30?

38 boards in 26 repositories on GitHub; the most starred are listed on this page, with their KiCad files.