
Walter feels
jibonaronno/documentsA
It is required to change settings using SCLManager.exe when required for new setup.

This repository contains all hardware information about Walter and shields
Walter feels is an open-source printed circuit board by benmcnelly, from the benmcnelly/walter-hardware repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 94 × 94 mm with 154 parts on 123 nets, routed with 842 tracks and 957 vias.
It is built around the SN74LV1T126DBVR-TP, MAX3221CPW and SN65HVDA1050AQDRQ1, with the THVD1450D, HDC1080DMBR and LT3120JV#PBF among its other parts. Its parts include 76 capacitors, 24 resistors, 14 ICs, 6 connectors and 4 transistors.
In this repository you can find all information about Walter's hardware. The hardware is designed using KiCad but we also support Altium designer footprints. Besides footprints you can also find:
Datasheets are published as PDF and are constructed using LaTeX. We welcome any pull request on the datasheets to make sure all information that is required is present.
All files in this repository are published under the GPLv3 license.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 0.1µF | Capacitor_SMD:C_0603_1608Metric | C17, C22, C38, C39, C40, C41, C42, C43, C44, C45, C47, C48, C49, C50, C51, C52 +8 |
| 10 | 10µF | Capacitor_SMD:C_1206_3216Metric | C5, C8, C10, C11, C18, C21, C24, C62, C70, C79 |
| 10 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8, JP9, JP10 |
| 8 | 100µF | Capacitor_SMD:C_1210_3225Metric | C1, C2, C58, C72, C73, C74, C75, C76 |
| 7 | 33µF | Capacitor_Tantalum_SMD:CP_EIA-7343-30_AVX-N | C26, C28, C30, C31, C32, C33, C53 |
| 6 | 1μF | Capacitor_SMD:C_0603_1608Metric | C19, C23, C25, C27, C29, C59 |
| 4 | 10kΩ 1% | Resistor_SMD:R_0603_1608Metric | R4, R5, R8, R11 |
| 4 | Fiducial | Fiducial:Fiducial_0.5mm_Mask1mm | FID1, FID2, FID3, FID4 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5_ISO14580 | H1, H2, H3, H4 |
| 2 | 0.22µF | Capacitor_SMD:C_0603_1608Metric | C63, C66 |
| 2 | 0.33μF | Capacitor_SMD:C_0603_1608Metric | C14, C20 |
| 2 | 1000pF | Capacitor_SMD:C_0603_1608Metric | C12, C15 |
| 2 | 1071010 | 107101x:1071010 | J2, J3 |
| 2 | 18pF | Capacitor_SMD:C_0603_1608Metric | C81, C82 |
| 2 | 1990070 | 1990070:1990070 | J4, J5 |
| 2 | 4.7μF | Capacitor_SMD:C_0603_1608Metric | C60, C77 |
| 2 | 45.3kΩ 1% | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | 510Ω 1% | Resistor_SMD:R_0603_1608Metric | R19, R21 |
| 2 | 60.4Ω | Resistor_SMD:R_0603_1608Metric | R9, R15 |
| 2 | SN74LV1T126DBVR | SN74LVC1G125DBVR:DBV0005A_N | U5, U6 |
| 1 | 0.22μF | Capacitor_SMD:C_0603_1608Metric | C9 |
| 1 | 0.470µF | Capacitor_SMD:C_0603_1608Metric | C13 |
| 1 | 100pF | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 10kΩ NTC | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | 10nF | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 10uF | Capacitor_SMD:C_0603_1608Metric | C84 |
| 1 | 1200pF | Capacitor_SMD:C_0603_1608Metric | C67 |
| 1 | 187kΩ 1% | Resistor_SMD:R_0603_1608Metric | R28 |
| 1 | 1MΩ 1% | Resistor_SMD:R_0603_1608Metric | R27 |
| 1 | 1N4448HLP | 1N4448HLP-7:DESD3V3S1BL7B | D1 |
| 1 | 2.2μF | Capacitor_SMD:C_0603_1608Metric | C16 |
| 1 | 200kΩ | Resistor_SMD:R_0603_1608Metric | R20 |
| 1 | 200Ω 1% | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 2200pF | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 22nF | Capacitor_SMD:C_0603_1608Metric | C65 |
| 1 | 3.48MΩ 1% | Resistor_SMD:R_0603_1608Metric | R24 |
| 1 | 301kΩ 1% | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 33nF | Capacitor_SMD:C_0603_1608Metric | C46 |
| 1 | 402kΩ 1% | Resistor_SMD:R_0603_1608Metric | R25 |
| 1 | 4700pF | Capacitor_SMD:C_0603_1608Metric | C80 |
| 1 | 5.6V | BZX84C5V6LT1G:BZX84C5V6LT1G | D2 |
| 1 | 5A Slow | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | 64,9kΩ 1% | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 64.9kΩ 1% | Resistor_SMD:R_0603_1608Metric | R23 |
| 1 | 693072010801 | 693072010801:693072010801 | J1 |
| 1 | 75kΩ 1% | Resistor_SMD:R_0603_1608Metric | R22 |
| 1 | 95.3kΩ 1% | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | ACT45B-510-2P-TL003 | ACT45B-510-2P-TL003:ACT45B1012PTL003 | L4 |
| 1 | CM1624-08DE | LIB_CM1624-08DE:SON40P135X330X55-17N | U13 |
| 1 | Conn_01x04_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | DMP2021UFDE-7 | DMP2066UFDE-7:MOSFET_DMP2066UFDE-7 | Q5 |
| 1 | DPT_Walter | walter:walter-socket | U1 |
| 1 | ESDCAN01-2BLY | ESDCAN01-2BLY:SOT95P255X150-3N | D3 |
| 1 | FDMC8030 | LIB_FDMC8030:FDMC89521L | Q1 |
| 1 | FDMC8327L | FDMC8327L:FDMC86139P | Q2 |
| 1 | HDC1080DMBR | Package_SON:Texas_PWSON-N6 | U7 |
| 1 | KRL3216T4-M-R003-F-T1 | KRL3216T4-M-R003-F-T1:RES_KRL3216T4-M-R003-F-T1 | R13 |
| 1 | KRL3216T4-M-R004-F-T1 | KRL3216T4-M-R003-F-T1:RES_KRL3216T4-M-R003-F-T1 | R14 |
| 1 | LPS22HBTR | LPS22HBTR:HLGA10_2X2_STM-L | U8 |
| 1 | LSM6DSM | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | locked |
| 1 | LT3120JV#PBF | LT3120JV#PBF:QFN50P400X500X83-29N-D | U11 |
| 1 | LTC4015EUHF#PBF | LTC4015EUHF#PBF:QFN50P500X700X80-39N-D | IC1 |
| 1 | MAX17291ATA+T | MAX17291ATA+T:SON50P200X200X80-9N-D | U12 |
| 1 | MAX3221 | MAX3221CUE+:SOP65P640X110-16N | U2 |
| 1 | MIC2005A-2YM5-TR | MIC2005A-2YM5-TR:MIC2005A-2YM5 | U3 |
| 1 | PM4343.332NLT | PM4343:INDPM140128X650N | L2 |
| 1 | SCD30 | SCD30:SCD30 | U10 |
| 1 | SI7611DN-T1-GE3 | SI7611DN-T1-GE3:VISHAY_SIS468DN-T1-GE3 | Q3 |
| 1 | SN65HVDA1050AQDRQ1 | SN65HVDA1050AQDRQ1:SOIC127P600X175-8N | U14 |
| 1 | SRP1770C-100M | SRP1770C-100M:INDPM178169X700N | L1 |
| 1 | SRR7045-100M | SRR7045-100M:SRR7045100M | L3 |
| 1 | THVD1450D | THVD1450D:SOIC127P599X175-8N | U4 |
The 151 most common of 154 parts.

jibonaronno/documentsA
It is required to change settings using SCLManager.exe when required for new setup.


shorlee/TeleSTERN
The TeleSTERN Project is an Open Source Rocketry Flight Computer based on the TeleMega by Altus Metrum.

TheHoodedFoot/wizzy
Hardware and software for the WYSIWYG laser camera system


jackw01/scanlight
A better light source for scanning color negative film


andreapiccini/spaghettilab-community
SpaghettiLab is an open modular hardware and software ecosystem for rapid prototyping, embedded systems development, and product innovation.
It measures 94 × 94 mm and has 4 copper layers, 1.61 mm thick.
154 parts, built around the SN74LV1T126DBVR-TP, MAX3221CPW, SN65HVDA1050AQDRQ1 and THVD1450D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the benmcnelly/walter-hardware repository on GitHub, at the commit this page was made from: the board is walter-feels/kicadproject/walter-feels.kicad_pcb and its schematic walter-feels/kicadproject/battery_charger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).