
HDC1080DMBR
Texas InstrumentsExtended
-40℃~+125℃ 0%RH~100%RH 1.3uA 14bit 2.7V~5.5V I2C ±0.2℃ ±2%RH WSON-6(3x3) Temperature and Humidity Sensor ROHS
- Part id
- ti/HDC1080DMBR
- Category
- Temperature And Humidity Sensor
- Package
- WSON-6(3x3)
- Pins
- 7
- In stock
- 1,349 at JLCPCB (C82227)
- Used on
- 10 open-source boards
Overview
The HDC1080DMBR is a temperature And Humidity Sensor made by Texas Instruments in a WSON-6(3x3) package with 7 pins. -40℃~+125℃ 0%RH~100%RH 1.3uA 14bit 2.7V~5.5V I2C ±0.2℃ ±2%RH WSON-6(3x3) Temperature and Humidity Sensor ROHS.
PCBKit's library has its KiCad symbol (Sensor_Humidity:HDC1080, from KiCad's library) and its footprint (Package_SON:Texas_PWSON-N6, from KiCad's library), ready for a KiCad board. 1,349 are in stock at JLCPCB (part C82227). 10 open-source boards in 10 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
12- Supply, least
- 2.7 V · VDD, recommended operating min · p. 4
- Supply, most
- 5.5 V · VDD, recommended operating max · p. 4
- Supply, absolute maximum
- 6 V · VDD, absolute maximum · p. 4
- Works from
- -40 °C · Temperature sensor ambient operating min · p. 4
- Works up to
- 125 °C · Temperature sensor ambient operating max · p. 4
- Works from
- -20 °C · Humidity sensor ambient operating min · p. 4
- Works up to
- 70 °C · Humidity sensor ambient operating max · p. 4
- Takes working
- 190 µA · VDD, RH measurement typical, TA = 30°C, RH = 40%, VDD = 3V · p. 5
- Takes asleep
- 100 nA · VDD, sleep mode typical · p. 5
- Junction to air (PWSON (DMB))
- 49.4 K/W · Junction-to-ambient thermal resistance · p. 4
- Junction to case (PWSON (DMB))
- 29.8 K/W · Junction-to-case (top) thermal resistance · p. 4
- Junction to board (PWSON (DMB))
- 23.1 K/W · Junction-to-board thermal resistance · p. 4
What it is and has
7- Relative humidity accuracy
- ±2% typical · p. 1
- Temperature accuracy
- ±0.2°C typical · p. 1
- Measurement resolution
- 14 bit · p. 1
- Interface
- I2C · p. 1
- Package
- PWSON (6-pin) DMB, 3.00 mm x 3.00 mm · p. 1
- Heater
- Integrated resistive element for sensor testing or condensation removal · p. 9
- I2C address
- 1000000 (7-bit address) · p. 10
Around it
2- res not specified
- between SDA and VDD; Required pull-up resistor. · p. 3
- res not specified
- between SCL and VDD; Required pull-up resistor. · p. 3
Specifications
38| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Input Voltage VDD | min -0.3 · max 6 V | 4 | |
| Input Voltage SCL | min -0.3 · max 6 V | 4 | |
| Input Voltage SDA | min -0.3 · max 6 V | 4 | |
| Storage Temperature TSTG | min -65 · max 150 °C | 4 | |
| Electrostatic discharge V(ESD) | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001; ± rating | max 2000 V | 4 |
| Electrostatic discharge V(ESD) | Charged-device model (CDM), per JEDEC specification JESD22-C101; ± rating | max 500 V | 4 |
| Supply Voltage VDD | min 2.7 · typ 3 · max 5.5 V | 4 | |
| Ambient Operating Temperature TA | Temperature sensor | min -40 · max 125 °C | 4 |
| Ambient Operating Temperature TA | Humidity sensor; see Figure 2 | min -20 · max 70 °C | 4 |
| Functional Operating Temperature TA | Humidity sensor; see Figure 2 | min -20 · max 85 °C | 4 |
| Junction-to-ambient thermal resistance RθJA | HDC1080, PWSON (DMB), 6 PINS | typ 49.4 °C/W | 4 |
| Junction-to-case (top) thermal resistance RθJC(top) | HDC1080, PWSON (DMB), 6 PINS | typ 29.8 °C/W | 4 |
| Junction-to-board thermal resistance RθJB | HDC1080, PWSON (DMB), 6 PINS | typ 23.1 °C/W | 4 |
| Junction-to-top characterization parameter ψJT | HDC1080, PWSON (DMB), 6 PINS | typ 3.3 °C/W | 4 |
| Junction-to-board characterization parameter ψJB | HDC1080, PWSON (DMB), 6 PINS | typ 23.1 °C/W | 4 |
| Junction-to-case (bottom) thermal resistance RθJC(bot) | HDC1080, PWSON (DMB), 6 PINS | typ 4.2 °C/W | 4 |
| Supply Current IDD | TA = 30°C, RH = 40%, VDD = 3V; RH measurement, bit 12 of 0x02 register = 0; excludes I2C communication and pull-up currents | typ 190 · max 220 uA | 5 |
| Supply Current IDD | TA = 30°C, RH = 40%, VDD = 3V; Temperature measurement, bit 12 of 0x02 register = 0; excludes I2C communication and pull-up currents | typ 160 · max 185 uA | 5 |
| Supply Current IDD | TA = 30°C, RH = 40%, VDD = 3V; Sleep Mode | typ 100 · max 200 nA | 5 |
| Supply Current IDD | TA = 30°C, RH = 40%, VDD = 3V; Average @ 1 measurement/second, RH (11 bit), bit 12 of 0x02 register = 0; while conversion is in progress; excludes I2C communication and pull-up currents | typ 710 nA | 5 |
| Supply Current IDD | TA = 30°C, RH = 40%, VDD = 3V; Average @ 1 measurement/second, Temp (11 bit), bit 12 of 0x02 register = 0; while conversion is in progress; excludes I2C communication and pull-up currents | typ 590 nA | 5 |
| Supply Current IDD | TA = 30°C, RH = 40%, VDD = 3V; Average @ 1 measurement/second, RH (11bit) +temperature (11 bit), bit 12 of 0x02 register = 1; while conversion is in progress; excludes I2C communication and pull-up currents | typ 1.3 uA | 5 |
| Supply Current IDD | TA = 30°C, RH = 40%, VDD = 3V; Startup (average on Start-up time) | typ 300 uA | 5 |
| Heater Current IHEAT | TA = 30°C, RH = 40%, VDD = 3V; Peak current | typ 7.2 mA | 5 |
| Heater Current IHEAT | TA = 30°C, RH = 40%, VDD = 3V; Average @ 1 measurement/second, RH (11bit) +temperature (11 bit), bit 12 of 0x02 register = 1; while conversion is in progress; excludes I2C communication and pull-up currents | typ 50 uA | 5 |
| Accuracy RHACC | TA = 30°C, RH = 40%, VDD = 3V; Refer to Figure 2 in Typical Characteristics section; ± value | typ 2 %RH | 5 |
| Repeatability RHREP | TA = 30°C, RH = 40%, VDD = 3V; 14 bit resolution; ± value | typ 0.1 %RH | 5 |
| Hysteresis RHHYS | TA = 30°C, VDD = 3V; 10% ≤ RH ≤ 70%; ± value | typ 1 %RH | 5 |
| Response Time RHRT | TA = 30°C, RH = 40%, VDD = 3V; t 63% | typ 15 s | 5 |
| Conversion Time RHCT | TA = 30°C, RH = 40%, VDD = 3V; 8 bit resolution | typ 2.5 ms | 5 |
| Conversion Time RHCT | TA = 30°C, RH = 40%, VDD = 3V; 11 bit resolution | typ 3.85 ms | 5 |
| Conversion Time RHCT | TA = 30°C, RH = 40%, VDD = 3V; 14 bit resolution | typ 6.5 ms | 5 |
| Operating Range RHOR | TA = 30°C, VDD = 3V; Non-condensing | min 0 · max 100 %RH | 5 |
| Long Term Drift RHLTD | Aging at typical conditions, 30°C and 20% to 50% RH; ± value | typ 0.25 %RH/yr | 5 |
| Accuracy TEMPACC | RH = 40%, VDD = 3V; 5°C < TA< 60°C; ± values | typ 0.2 · max 0.4 °C | 5 |
| Repeatability TEMPREP | TA = 30°C, RH = 40%, VDD = 3V; 14 bit resolution; ± value | typ 0.1 °C | 5 |
| Conversion Time TEMPCT | TA = 30°C, RH = 40%, VDD = 3V; 11 bit accuracy | typ 3.65 ms | 5 |
| Conversion Time TEMPCT | TA = 30°C, RH = 40%, VDD = 3V; 14 bit accuracy | typ 6.35 ms | 5 |
Pins, by the datasheet
7- 1 SDA
- Serial data line for I2C; requires a pull-up resistor to VDD. · p. 3
- 2 GND
- Ground. · p. 3
- 3 NC
- May be left floating or connected to GND. · p. 3
- 4 NC
- May be left floating or connected to GND. · p. 3
- 5 VDD
- Supply Voltage. · p. 3
- 6 SCL
- Serial clock line for I2C, open-drain; requires a pull-up resistor to VDD. · p. 3
- DAP DAP
- Die Attach Pad on bottom of device; should be left floating. · p. 3
- 2 layers55.1 × 26 mm

- 2 layers50 × 30 mm

- 2 layers25.9 × 44.7 mm

CatiPCB
andreesc/BLE-Temp-Sensor
Hardware, Firmware, and Mechanical Design Files for a Temperature Sensor Board featuring the HDC1080 sensor and Bluetooth Low Energy (BLE) connectivity.
36 parts - 4 layers94 × 94 mm

Walter feels
benmcnelly/walter-hardware
This repository contains all hardware information about Walter and shields
154 partsGPL-3.0 - 2 layers99 × 93.5 mm

- 4 layers30 × 18 mm

Ble mote
kitspace-forks/air-quality-monitor
Design repository for an ESP32-based IoT air quality monitor
49 partsBSD-3-Clause - 4 layers53 × 35.5 mm

- 4 layers35 × 50 mm

Parts like it
3HDC2080DMBR
WSON-6-EPFactory calibration、Built-in heater、Low power drive measurement WSON-6-EP(3x3) Temperature and Humidity Sensor ROHSTexas InstrumentsTemperature And Humidity SensorHDC2080DMBT
WSON-6-EP(3x3)-40℃~+85℃ 0%RH~100%RH 1.62V~3.6V 11bit 330nA Factory calibration、Built-in heater、Low power drive measurement I2C ±0.4℃ ±3%RH WSON-6-EP(3x3) Temperature and Humidity Sensor ROHSTexas InstrumentsTemperature And Humidity SensorHDC1080DMBT
WSON-6-EP(3x3)-40℃~+125℃ 0%RH~100%RH 1.3uA 14bit 2.7V~5.5V I2C ±0.2℃ ±2%RH WSON-6-EP(3x3) Temperature and Humidity Sensor ROHSTexas InstrumentsTemperature And Humidity Sensor
Questions
Is there a KiCad symbol and footprint for the HDC1080DMBR?
Yes. The symbol is Sensor_Humidity:HDC1080 and the footprint Package_SON:Texas_PWSON-N6, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the HDC1080DMBR?
WSON-6(3x3), with 7 pins. Its footprint is drawn on this page.
Where is the HDC1080DMBR datasheet?
Texas Instruments publishes it: the Datasheet link on this page opens it.
Where can I order the HDC1080DMBR?
JLCPCB lists it as part C82227, with 1,349 in stock; the sellers' links on this page open their listings.
What can replace the HDC1080DMBR?
Parts like it in the library: the HDC2080DMBR by Texas Instruments, the HDC2080DMBT by Texas Instruments and the HDC1080DMBT by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the HDC1080DMBR?
10 boards in 10 repositories on GitHub; the most starred are listed on this page, with their KiCad files.