Skip to the content
1234567

HDC2080DMBR

Texas InstrumentsExtended

Factory calibration、Built-in heater、Low power drive measurement WSON-6-EP(3x3) Temperature and Humidity Sensor ROHS

Part id
ti/HDC2080DMBR
Category
Temperature And Humidity Sensor
Package
WSON-6-EP
Pins
7
In stock
2,120 at JLCPCB (C918141)
Used on
3 open-source boards

Overview

The HDC2080DMBR is a temperature And Humidity Sensor made by Texas Instruments in a WSON-6-EP package with 7 pins. Factory calibration、Built-in heater、Low power drive measurement WSON-6-EP(3x3) Temperature and Humidity Sensor ROHS.

PCBKit's library has its KiCad symbol (Sensor_Humidity:HDC2080, from KiCad's library) and its footprint (Sensor_Humidity:Texas_S-PWSON-N6-HDC2080, from KiCad's library), ready for a KiCad board. 2,120 are in stock at JLCPCB (part C918141). 3 open-source boards in 3 repositories on GitHub use it.

Symbol

1SDA2GND3ADDR4DRDY5VDD6SCL
Sensor_Humidity:HDC2080From KiCad's library

Footprint

1234567
Sensor_Humidity:Texas_S-PWSON-N6-HDC2080From KiCad's library

From the datasheet

13
Supply, least
1.62 V · VDD, recommended operating min · p. 5
Supply, most
3.6 V · VDD, recommended operating max · p. 5
Supply, absolute maximum
3.9 V · VDD, absolute max · p. 5
Works from
-40 °C · temperature sensor free-air operating min · p. 5
Works up to
125 °C · temperature sensor free-air operating max · p. 5
Works from
-20 °C · relative humidity sensor free-air operating min · p. 5
Works up to
70 °C · relative humidity sensor free-air operating max · p. 5
Works up to
85 °C · integrated heater free-air operating max · p. 5
Takes working
650 µA · typical RH measurement supply current, VDD = 1.8 V · p. 6
Takes asleep
50 nA · typical sleep supply current · p. 6
Junction to air (WSON (DMB))
56.4 K/W · junction to ambient · p. 5
Junction to case (WSON (DMB))
73.6 K/W · junction to case, top · p. 5
Junction to board (WSON (DMB))
24 K/W · junction to board · p. 5

What it is and has

6
Relative humidity range
0% to 100% · p. 1
Humidity accuracy
±2% typical, ±3% maximum · p. 1
Temperature accuracy
±0.2°C typical, ±0.4°C maximum · p. 1
Automatic measurement
Automatic measurement mode · p. 1
Interface
I2C · p. 1
Package
WSON (6), 3.00mm × 3.00mm · p. 1

Specifications

45
ParameterConditionsAs printedPage
对 VDD 引脚施加的电压 VDDmin -0.3 · max 3.9 V5
对 ADDR 引脚施加的电压 ADDRmin -0.3 · max 3.9 V5
对 SCL 引脚施加的电压 SCLmin -0.3 · max 3.9 V5
对 SDA 引脚施加了电压 SDAmin -0.3 · max 3.9 V5
对 DRDY/INT 引脚施加的电压 DRDY/INTMaximum = VDD + 0.3 Vmin -0.3 V5
存储温度 Tstgmin -65 · max 150 °C5
静电放电 V(ESD)人体放电模型(HBM),符合 ANSI/ESDA/JEDEC JS-001(1)min -2000 · max 2000 V5
静电放电 V(ESD)充电器件模型(CDM),符合 JEDEC 规范 JESD22-C101(2)min -500 · max 500 V5
电源电压 VDDmin 1.62 · max 3.6 V5
温度传感器 - 自然通风工作温度范围 TTEMPmin -40 · max 125 °C5
相对湿度传感器 - 自然通风工作温度范围(1) TRHmin -20 · max 70 ℃5
集成式加热器 - 自然通风工作温度范围 THEATERmin -40 · max 85 °C5
相对湿度传感器(非冷凝)(1) RHORmin 0 · max 100 %RH5
结至环境热阻 RθJAHDC2080, WSON (DMB), 6 引脚typ 56.4 °C/W5
结至外壳(顶部)热阻 RθJC(top)HDC2080, WSON (DMB), 6 引脚typ 73.6 °C/W5
结至电路板热阻 RθJBHDC2080, WSON (DMB), 6 引脚typ 24 °C/W5
结至顶部特征参数 ΨJTHDC2080, WSON (DMB), 6 引脚typ 3.8 °C/W5
结至电路板特征参数 ΨJBHDC2080, WSON (DMB), 6 引脚typ 24 °C/W5
结至外壳(底部)热阻 RθJC(bot)HDC2080, WSON (DMB), 6 引脚typ 13 °C/W5
电源电流 IDDTA = 30°C, VDD = 1.8V, 20% ≤ RH ≤ 80%; RH 测量(1)typ 650 · max 890 uA6
电源电流 IDDTA = 30°C, VDD = 1.8V, 20% ≤ RH ≤ 80%; 温度测量(1)typ 550 · max 730 uA6
电源电流 IDDTA = 30°C, VDD = 1.8V, 20% ≤ RH ≤ 80%; 睡眠模式typ 0.05 · max 1 uA6
电源电流 IDDTA = 30°C, VDD = 1.8V, 20% ≤ RH ≤ 80%; 以每秒 1 个样本取平均值,仅 RH 或温度 (1) (2)typ 0.3 uA6
电源电流 IDDTA = 30°C, VDD = 1.8V, 20% ≤ RH ≤ 80%; 以每秒 1 个样本取平均值,RH(11 位)和温度(11 位)(1) (2)typ 0.55 uA6
电源电流 IDDTA = 30°C, VDD = 1.8V, 20% ≤ RH ≤ 80%; 以每 2 秒 1 个样本取平均值,RH(11 位)和温度(11 位)(1) (2)typ 0.3 uA6
电源电流 IDDTA = 30°C, VDD = 1.8V, 20% ≤ RH ≤ 80%; 以每 10 秒 1 个样本取平均值,RH(11 位)和温度(11 位)(1) (2)typ 0.105 uA6
电源电流 IDDTA = 30°C, VDD = 1.8V, 20% ≤ RH ≤ 80%; 启动(平均启动时间)typ 80 uA6
集成式加热器(启用时) IHEATERTA = 30°C, 20% ≤ RH ≤ 80%; VDD = 3.3Vtyp 90 mA6
精度(3) (4) RHACCVDD = 1.8V, 20% ≤ RH ≤ 80%; 0°C < TA < 60°C。非冷凝。typ 2 · max 3 %RH6
可重复性(5) RHREPTA = 30°C, VDD = 1.8V, 20% ≤ RH ≤ 80%; 14 位分辨率typ 0.1 %RH6
迟滞(6) RHHYSTA = 30°C, VDD = 1.8V, 20% ≤ RH ≤ 80%typ 1 %RH6
响应时间(7) RHHYSTA = 30°C, VDD = 1.8V, 20% ≤ RH ≤ 80%; t63% 阶跃(8)typ 8 s6
转换时间(5) RHCTTA = 30°C, VDD = 1.8V, 20% ≤ RH ≤ 80%; 9 位精度typ 275 us6
转换时间(5) RHCTTA = 30°C, VDD = 1.8V, 20% ≤ RH ≤ 80%; 11 位精度typ 400 us6
转换时间(5) RHCTTA = 30°C, VDD = 1.8V, 20% ≤ RH ≤ 80%; 14 位精度typ 660 us6
长期漂移(9) RHLTDTA = 30°C, VDD = 1.8V, 20% ≤ RH ≤ 80%typ 0.25 %RH/年6
精度 (5) TEMPACCVDD = 1.8V, 20% ≤ RH ≤ 80%; 5°C < TA < 60°Ctyp 0.2 · max 0.7 °C6
精度 (5) TEMPACCVDD = 1.8V, 20% ≤ RH ≤ 80%; 10°C < TA < 35°Ctyp 0.2 · max 0.4 °C6
可重复性(5) TEMPREPTA = 30°C, VDD = 1.8V, 20% ≤ RH ≤ 80%; 14 位分辨率typ 0.1 °C6
转换时间(5) TEMPCTTA = 30°C, VDD = 1.8V, 20% ≤ RH ≤ 80%; 9 位精度typ 225 us6
转换时间(5) TEMPCTTA = 30°C, VDD = 1.8V, 20% ≤ RH ≤ 80%; 11 位精度typ 350 us6
转换时间(5) TEMPCTTA = 30°C, VDD = 1.8V, 20% ≤ RH ≤ 80%; 14 位精度typ 610 us6
电源对精度的敏感度 TEMPPSRRTA = 30°C, 20% ≤ RH ≤ 80%; VDD = 1.8V 至 3.6Vtyp 0.08 ℃/V6
低电平输出电压 VOLSCL、SDA 引脚; TA = 30°C, VDD = 1.8V; IOL = 3mAmax 0.4 V6
输入电容 (5) CINSCL、SDA 引脚; TA = 30°C, VDD = 1.8Vtyp 0.5 pF6

Ordering codes, by the datasheet

2
HDC2080DMBR
WSON (DMB) · 6 pins; 3000 | LARGE T&R; -40 to 125°C; NIPDAU · p. 36
HDC2080DMBR.A
WSON (DMB) · 6 pins; 3000 | LARGE T&R; -40 to 125°C; NIPDAU · p. 36

Open-source boards using it

3
  • 2 layers63 × 50 mmThermometer, the printed circuit board in 3D

    Thermometer

    CornetPrisme/PCB-Thermometer

    Custom environmental sensor node based on the ESP32-C6 (Wi-Fi 6, BLE 5, Zigbee/Thread). It features three distinct temperature and humidity sensors on a shared I2C bus, is powered via USB-C (3.3V LDO), and includes two…

    40 parts
  • 4 layers52 × 15 mmBoard B, the printed circuit board in 3D

    Board B

    Top-Cat/ZigbeeBlinds

    Custom firmware and PCB design to replace the RF board inside Somfy 1003293 motor assemblies with a Zigbee-compatible controller.

    29 parts
  • 4 layers45.5 × 45.5 mmPocketSat, the printed circuit board in 3D

    PocketSat

    Mig-M27/Avionics-PCBs

    Este repositório é usado para gerir as versões dos projetos KiCAD do sistema de Avionics da Porto Space Team. Está dividido em 2 secções: 1.

    82 parts

Parts like it

3

Questions

Is there a KiCad symbol and footprint for the HDC2080DMBR?

Yes. The symbol is Sensor_Humidity:HDC2080 and the footprint Sensor_Humidity:Texas_S-PWSON-N6-HDC2080, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the HDC2080DMBR?

WSON-6-EP, with 7 pins. Its footprint is drawn on this page.

Where is the HDC2080DMBR datasheet?

Texas Instruments publishes it: the Datasheet link on this page opens it.

Where can I order the HDC2080DMBR?

JLCPCB lists it as part C918141, with 2,120 in stock; the sellers' links on this page open their listings.

What can replace the HDC2080DMBR?

Parts like it in the library: the HDC2080DMBT by Texas Instruments, the HDC1080DMBR by Texas Instruments and the HDC1080DMBT by Texas Instruments. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the HDC2080DMBR?

3 boards in 3 repositories on GitHub; the most starred are listed on this page, with their KiCad files.