
Board A
Top-Cat/ZigbeeBlinds
Custom firmware and PCB design to replace the RF board inside Somfy 1003293 motor assemblies with a Zigbee-compatible controller.

Custom firmware and PCB design to replace the RF board inside Somfy 1003293 motor assemblies with a Zigbee-compatible controller.
Board B is an open-source printed circuit board by Top-Cat, from the Top-Cat/ZigbeeBlinds repository on GitHub. It is a 4-layer board of 52 × 15 mm with 29 parts on 39 nets, routed with 213 tracks and 61 vias.
It is built around the HDC2080DMBR, ESP32-C6-MINI-1 and AO3401A. Its parts include 12 resistors, 4 connectors, 3 capacitors, 3 ICs and 3 switches. It belongs with the ESP32 and RISC-V boards of this library.
Custom firmware and PCB design to replace the RF board inside Somfy 1003293 motor assemblies with a Zigbee-compatible controller.

The motor driver works at the supply current of 12V but everything else runs at 3.3V provided by a switching regulator.
Bypassing the regulator the power draw at idle is ~120uA with spikes to 350mA when checking for new commands. Scaling for the standard 12V input and assuming 70% eficiency in the power supply the avarage draw is only ~50uA. With the standard 2600mAh battery this puts the theoretical standby time at 6 years.
The pcb directory contains KiCad sources for the two boards used in this build:
Board_A — Power and motor controlBoard_B — ESP32-C6, USB, sensors, and user controlsBoard images:

main/ — firmware source codepcb/ — KiCad PCB and schematic filespatches/ — patches for esp-idf componentstools/ — helper scripts for OTA patch generation and image creationidf.py on PATH. $IDF_PATH/export.sh
patch -p0 < patches/i2cdev.c
idf.py buildidf.py flashThe project supplies an external converter for use with zigbee2mqtt. With it this device should be essentially plug and play.
To use it copy blinds.mjs to the external_converters/ folder in your z2m installation.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R4, R10, R13 |
| 3 | 1uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3 |
| 2 | 1k | Resistor_SMD:R_0603_1608Metric | R11, R12 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R2, R3 |
| 2 | Conn_01x01_Pin | TestPoint:TestPoint_Pad_D2.0mm | J1, J2 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 2M | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 500k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | A1262 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U2 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | BOOT | PDU:TACTILE_SWITCH_SMD_4.6X2.8MM | SW1 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.00mm:PinHeader_1x06_P2.00mm_Vertical | J3 |
| 1 | D | Diode_SMD:D_1206_3216Metric | D3 |
| 1 | ESP32-C6-MINI-1 | RF_Module:XCVR_ESP32-C6-MINI-1U-N4 | U1 |
| 1 | HDC2080DMBR | PDU:SON100P300X300X80-7N | U5 |
| 1 | LED | LED_SMD:LED_1206_3216Metric | D2 |
| 1 | LOGO | LOGO | G*** |
| 1 | RESET | PDU:TACTILE_SWITCH_SMD_4.6X2.8MM | SW2 |
| 1 | SW_SPST | PDU:Button_SMD_8x3.5_RightAngle | SW3 |
| 1 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J5 |

Top-Cat/ZigbeeBlinds
Custom firmware and PCB design to replace the RF board inside Somfy 1003293 motor assemblies with a Zigbee-compatible controller.

CornetPrisme/PCB-Thermometer
Custom environmental sensor node based on the ESP32-C6 (Wi-Fi 6, BLE 5, Zigbee/Thread). It features three distinct temperature and humidity sensors on a shared I2C bus, is powered via USB-C (3.3V LDO), and includes two…

Mig-M27/Avionics-PCBs
Este repositório é usado para gerir as versões dos projetos KiCAD do sistema de Avionics da Porto Space Team. Está dividido em 2 secções: 1.


Sunewst/garden-microcontroller
A microcontroller designed for use in garden projects in mind. Deep-Sleep compatible MUX/I2C ports, Li-Po battery power option, SD card reader, and easier chain ability of multiple boards.


JosefTAv/E-paper-picture-frame-HW
Hardware files for ESP32 based E-paper picture frame

mcskny/wireless-he-macropad
A wireless, 12-key Hall-effect macropad built around a custom PCB, an ESP32-C6 sender, an ESP32-S3 USB receiver, and a native macOS companion app.

It measures 52 × 15 mm and has 4 copper layers, 1 mm thick.
29 parts, built around the HDC2080DMBR, ESP32-C6-MINI-1 and AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Top-Cat/ZigbeeBlinds repository on GitHub, at the commit this page was made from: the board is pcb/Board_B.kicad_pcb and its schematic pcb/Board_A.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Top-Cat before reusing the design.