
Esp32-weather epd
Diabltica/esp32-weather-epd_pcb
A low-power E-Paper weather display powered by an ESP32 microcontroller. Utilizes the OpenWeatherMap API.

A simple CO2 monitor based on the Sensirion SCD-30 and an ESP32. This is intended to have Wi-Fi and Ethernet thought that is not yet implemented
Minico2 is an open-source printed circuit board by artemist, from the artemist/minico2 repository on GitHub. It is a 2-layer board of 60 × 60 mm with 46 parts on 73 nets, routed with 188 tracks and 74 vias.
It is built around the CH340C, ESP32-WROOM-32E and SCD30, with the MBR0530T1G, MMBT2222 and IRLML0100TRPBF among its other parts. Its parts include 13 capacitors, 8 resistors, 4 ICs, 3 diodes and 3 transistors. It belongs with the ESP32 boards of this library.
A simple CO2 monitor based on the Sensirion SCD-30 and an ESP32. This is intended to have Wi-Fi and Ethernet thought that is not yet implemented
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1µF 25V | Capacitor_SMD:C_0603_1608Metric | C8, C9, C10, C11, C12, C13, C14, C15 |
| 4 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2, H3, H4 |
| 4 | TestPoint_Small | TestPoint:TestPoint_Pad_D1.0mm | TP4, TP5, TP6, TP7 |
| 3 | MBR0530T1G | Diode_SMD:D_SOD-123 | D1, D2, D3 |
| 3 | TestPoint_Small | TestPoint:TestPoint_Pad_D2.0mm | TP1, TP2, TP3 |
| 2 | 10kΩ | Resistor_SMD:R_0603_1608Metric | R5, R6 |
| 2 | 4.7µF 25V | Capacitor_SMD:C_0603_1608Metric | C6, C7 |
| 2 | 5.1kΩ | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | MMBT2222 | Package_TO_SOT_SMD:SOT-23 | Q1, Q2 |
| 1 | 100kΩ | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 10µF | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | 1MΩ | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 2.2µH 1.5A | Inductor_SMD:L_1008_2520Metric | L1 |
| 1 | 2.2Ω | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 4.7µF | Capacitor_SMD:C_0603_1608Metric | C2 |
| 1 | 453kΩ | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 47µH 500mA | Inductor_SMD:L_Taiyo-Yuden_NR-60xx | L2 |
| 1 | AP3418 | minico2:SOT-25 | U3 |
| 1 | CH340C | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2 |
| 1 | ESP32-WROOM-32E | RF_Module:ESP32-WROOM-32 | U1 |
| 1 | GDEY0213Z98 | minico2:JUSHUO_AFC07-S24ECC-00_1x24-1MP_P0.5mm_Horizontal_Reversed_Numbering | J2 |
| 1 | IRLML0100TRPBF | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | SCD30 | minico2:scd30 | U5 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |

Diabltica/esp32-weather-epd_pcb
A low-power E-Paper weather display powered by an ESP32 microcontroller. Utilizes the OpenWeatherMap API.




gpgreen/atmo-monitor
Kicad design for atmospheric measurement sensor with Display


Duckle29/InKli
An ESP32-WROOM32 backpack for an SCD30. Uses a high effeciency Buck converter to try and avoid self heating.

SolderedElectronics/Soldered-Inkplate-6-COLOR-hardware-design
Hardware design, BOM, gerbers and 3D files for Soldered-Inkplate-6-COLOR designed by Soldered Electronics.
It measures 60 × 60 mm and has 2 copper layers, 1.6 mm thick.
46 parts, built around the CH340C, ESP32-WROOM-32E, SCD30 and MBR0530T1G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the artemist/minico2 repository on GitHub, at the commit this page was made from: the board is minico2.kicad_pcb and its schematic minico2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask artemist before reusing the design.