4 layers100 × 100 mm
4 layers117 × 107 mm
HUB MPE
felixmanfredi/MPE_HUB- Size
- 117 × 107 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 257
- Nets
- 291
- Pads
- 907
- Tracks, vias
- 1,611, 369
- Pours
- 739
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 3 Apr 2025
- Updated
- 27 Nov 2025
Overview
HUB MPE is an open-source printed circuit board by felixmanfredi, from the felixmanfredi/MPE_HUB repository on GitHub. It is a 4-layer board of 117 × 107 mm with 257 parts on 291 nets, routed with 1,611 tracks and 369 vias.
It is built around the SN65HVD72DRBR, ESP32-S3-MINI-1-N4R2 and RTL8305NB-VB-CG, with the CD4093BM, W5500 and CRCW060310R0JNEAHP among its other parts. Its parts include 111 resistors, 76 capacitors, 28 diodes, 11 ICs and 7 connectors. It belongs with the ESP32 boards of this library.
Main components
12
SN65HVD72DRBR
SON-8(3x3)-40℃~+125℃ 1 1 213 250Kbps 3V~3.6V 950uA Half-Duplex Transceiver ±8kV SON-8(3x3) RS-485 / RS-422 ICs ROHSTexas InstrumentsRS-485 / RS-422 ICs
ESP32-S3-MINI-1-N4R2
SMD-103.5dBm -40℃~+85℃ 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 On-board PCB Antenna UART、SPI、I2C、GPIO、I2S、USB SMD WiFi Modules ROHSEspressif SystemsWiFi Modules
RTL8305NB-VB-CG
QFN-48-EP(6x6)0℃~+70℃ 1.2V、3.3V 10BASE-T、100BASE-TX 10Mbit/s、100Mbit/s 5 QFN-48-EP(6x6) Ethernet Transceivers ROHSRealtek SemiconEthernet Transceivers
CD4093BM
SOIC-14-55℃~+125℃ 130ns@15V,50pF 2 3.4mA 3.4mA 3.6V~10.8V 3V~18V 4 4.95V、9.95V、14.95V 4000B Series 4uA 50mV 900mV~4V NAND Gate SOIC-14 Logic Gates ROHSTexas InstrumentsLogic Gates
W5500
LQFP-48_7x7-40℃~+85℃ 10BASE-T、100BASE-TX 3.3V 32KB SPI SPI Wake-up function、Programmable LED indication、Low-power mode Yes LQFP-48(7x7) Ethernet Controllers ROHSWIZNETEthernet Controllers
CRCW060310R0JNEAHP
0603-55℃~+155℃ 10Ω 330mW 75V Thick Film Resistor ±200ppm/℃ ±5% 0603 Chip Resistor - Surface Mount ROHSVishay IntertechnologyChip Resistor - Surface Mount
H1102NLT
SMD,12.7x7.1mm0℃~+70℃ 1.5kV 10/100 Base-T 1:1、1:1 Single port SMD,12.7x7.1mm Pulse Transformers(LAN) ROHSPULSEPulse Transformers(LAN)
1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching Diodes
IRLML0100TRPBF
SOT-23-55℃~+150℃ 1 N-channel 1.3W 1.6A 100V 13pF 2.5V 2.5nC 220mΩ@10V 27pF 290pF ±16V SOT-23 MOSFETs ROHSInfineon TechnologiesMOSFETs
MLT-8530
SMD,8.5x8.5mm-20℃~+70℃ 2.5V~4.5V 2.7kHz 3.3mm 3.6V 8.5mm 8.5mm 80dB 95mA Electromagnetic Passive (Externally Driven) SMD SMD,8.5x8.5mm Buzzers ROHSJiangsu Huaneng ElecBuzzers
SS54
SMA(DO-214AC)-55℃~+125℃ 1mA@40V 40V 550mV@5A 5A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky DiodesTYPEC-303-ACP16
SMD-25℃~+85℃ 1 10000 times 16P 5A 5V 6.4mm Black Female Surface Mount,Vertical Type-C SMD USB Connectors ROHSXUNPUUSB Connectors
Parts
257| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 100n | Capacitor_SMD:C_0603_1608Metric | C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C22, C24, C25, C26, C28 +8 |
| 22 | 100nf | Capacitor_SMD:C_0603_1608Metric | C37, C38, C39, C40, C42, C44, C46, C48, C49, C50, C52, C53, C56, C57, C58, C60 +6 |
| 16 | 1K | Resistor_SMD:R_0603_1608Metric | R15, R16, R17, R18, R19, R20, R28, R30, R43, R49, R78, R79, R90, R92, R105, R107 |
| 15 | 10k | Resistor_SMD:R_0603_1608Metric | R60, R61, R62, R64, R65, R66, R67, R68, R69, R70, R71, R72, R73, R74, R75 |
| 14 | 0 | Resistor_SMD:R_0603_1608Metric | R5, R13, R36, R44, R50, R53, R54, R56, R57, R58, R59, R102, R103, R104 |
| 11 | 0805_GREEN | easyeda2kicad:LED0805-R-RD | LED3, LED4, LED5, LED6, LED7, LED10, LED12, LED13, LED19, LED21, LED23 |
| 11 | 0805_RED | easyeda2kicad:LED0805-R-RD | LED1, LED8, LED9, LED11, LED14, LED15, LED16, LED17, LED18, LED20, LED22 |
| 10 | 15k | Resistor_SMD:R_0603_1608Metric | R41, R42, R47, R48, R87, R88, R98, R99, R100, R101 |
| 10 | 75 | Resistor_SMD:R_0603_1608Metric | R3, R4, R8, R9, R10, R11, R12, R14, R76, R84 |
| 9 | 10K | Resistor_SMD:R_0603_1608Metric | R25, R32, R39, R40, R85, R86, R89, R95, R97 |
| 6 | 2k | Resistor_SMD:R_0603_1608Metric | R1, R2, R45, R46, R51, R52 |
| 6 | CRCW060310R0JNEAHP | easyeda2kicad:R0603 | R26, R31, R93, R94, R108, R109 |
| 5 | 1n | Capacitor_SMD:C_0603_1608Metric | C21, C23, C27, C32, C67 |
| 5 | H1102NLT | easyeda2kicad:XFMR-SMD_H1102NLT | T1, T2, T3, T4, T6 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | 100k | Resistor_SMD:R_0603_1608Metric | R29, R91, R106 |
| 3 | 10nf | Capacitor_SMD:C_0603_1608Metric | C41, C63, C65 |
| 3 | 120 | Resistor_SMD:R_0603_1608Metric | R27, R96, R111 |
| 3 | 1N4148W | easyeda2kicad:SOD-123F_L2.7-W1.6-LS3.8-RD | D1, D4, D5 |
| 3 | 1u | Capacitor_SMD:C_0603_1608Metric | C34, C45, C47 |
| 3 | 220 | Resistor_SMD:R_0603_1608Metric | R34, R35, R110 |
| 3 | 3.3nF | Capacitor_SMD:C_0603_1608Metric | C74, C75, C76 |
| 3 | Conn_01x05 | Connector_JST:JST_VH_B5P-VH-B_1x05_P3.96mm_Vertical | J5, J6, J7 |
| 3 | SN65HVD72DR | easyeda2kicad:SOP-8_L5.0-W4.0-P1.27-LS6.0-BL | U3, U10, U12 |
| 3 | TestPoint_Probe | easyeda2kicad:TEST-TH_BD2.54-P1.39 | TP4, TP5, TP6 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C51, C59 |
| 2 | 10uF 35V | Capacitor_SMD:C_0603_1608Metric | C2, C79 |
| 2 | 18pF | Capacitor_SMD:C_0603_1608Metric | C54, C55 |
| 2 | 200k | Resistor_SMD:R_0603_1608Metric | R21, R22 |
| 2 | 20pF | Capacitor_SMD:C_0603_1608Metric | C4, C5 |
| 2 | 22uF 0805 | Capacitor_SMD:C_0805_2012Metric | C81, C82 |
| 2 | 4.99K | Resistor_SMD:R_0603_1608Metric | R6, R7 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R37, R38 |
| 2 | 51 | Resistor_SMD:R_0603_1608Metric | R80, R81 |
| 2 | 6.8nF | Capacitor_SMD:C_0603_1608Metric | C64, C66 |
| 2 | 82 | Resistor_SMD:R_0603_1608Metric | R77, R83 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2, JP3 |
| 2 | VND7050AJTR | easyeda2kicad:POWERSSO-16_L4.9-W3.9-P0.50-LS6.0-BL-EP | U5, U6 |
| 1 | 0805_YELLOW | easyeda2kicad:LED0805-R-RD | LED2 |
| 1 | 1.2V | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | 1.8nF | Capacitor_SMD:C_0603_1608Metric | C77 |
| 1 | 10 | Resistor_SMD:R_0603_1608Metric | R82 |
| 1 | 12.4k | Resistor_SMD:R_0603_1608Metric | R63 |
| 1 | 1M | Resistor_SMD:R_0603_1608Metric | R55 |
| 1 | 1M | easyeda2kicad:R0603 | R113 |
| 1 | 22nF | Capacitor_SMD:C_0603_1608Metric | C68 |
| 1 | 22uF 25V | Capacitor_SMD:C_0805_2012Metric | C43 |
| 1 | 25MHz | easyeda2kicad:CRYSTAL-SMD_4P-L3.2-W2.5-BL | X2 |
| 1 | 25Mhz | easyeda2kicad:CRYSTAL-SMD_4P-L3.2-W2.5-BL | X1 |
| 1 | 300 | Resistor_SMD:R_0603_1608Metric | R33 |
| 1 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C61 |
| 1 | 4.7uH | easyeda2kicad:IND-SMD_L5.4-W5.2 | L1 |
| 1 | 560K | easyeda2kicad:R0603 | R112 |
| 1 | ADS1015IDGSR | easyeda2kicad:VSSOP-10_L3.0-W3.0-P0.50-LS4.9-BL | U9 |
| 1 | AP63203WU-7 | easyeda2kicad:TSOT-26_L2.9-W1.6-P0.95-LS2.8-BL | U13 |
| 1 | CD4093BM | easyeda2kicad:SOIC-14_L8.7-W3.9-P1.27-LS6.0-BL | U8 |
| 1 | Conn_01x01_Pin | Connector_Wire:SolderWire-0.75sqmm_1x01_D1.25mm_OD3.5mm | J2 |
| 1 | Conn_01x06 | Connector_JST:JST_VH_B6P-VH-B_1x06_P3.96mm_Vertical | J3 |
| 1 | Conn_01x07 | Connector_JST:JST_VH_B7P-VH-B_1x07_P3.96mm_Vertical | J4 |
| 1 | Conn_01x09 | Connector_JST:JST_VH_B9P-VH-B_1x09_P3.96mm_Vertical | J1 |
| 1 | DUPLED | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | ESP32-S3-MINI-1-N4R2 | easyeda2kicad:BULETM-SMD_ESP32-S3-MINI-1-N8 | U4 |
| 1 | IRLML0100TRPBF | easyeda2kicad:SOT-23_L2.9-W1.3-P1.90-LS2.4-BR | Q1 |
| 1 | LOGO | LOGO | G*** |
| 1 | MLT-8530 | easyeda2kicad:BUZ-SMD_4P-L8.5-W8.5-P8.50-BR | BUZZER1 |
| 1 | RTL8305NB-VB-CG | easyeda2kicad:QFN-48_L6.0-W6.0-P0.40-TL-EP4.4 | U2 |
| 1 | SPDLED | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | SS54 | easyeda2kicad:SMA_L4.4-W2.8-LS5.4-R-RD | D6 |
| 1 | TYPEC-303-ACP16 | easyeda2kicad:USB-C-SMD_TYPEC-303-ACP16 | USB2 |
| 1 | USBLC6-2SC6_C2687116 | easyeda2kicad:SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | D2 |
| 1 | W5500 | easyeda2kicad:LQFP-48_L7.0-W7.0-P0.50-LS9.0-BL | U7 |
Similar boards
- 4 layers55 × 55 mm
Drone PCB FC
Ethansuttor/drone_PCB
An 80×80 mm STM32F405 flight controller for a 4S freestyle quad, running Betaflight off a custom target I wrote.
90 parts - 2 layers72 × 15 mm
Hub
PythonOrC/USB-HUB-Keyboard
Customized USB 2.0 Hub for Rainy 75 RT. Goes onto the Type C Port.
18 parts - 4 layers210.6 × 220 mm
CMAIN PCB
Arrow-air/project-caribou
Project Caribou documentation, designs, and project artifacts.
248 parts177CERN-OHL-S-2.0 - 4 layers48 × 32.3 mm
FrontPanel
mrspieb/HW-FanControl
Everything required to build the PCB and case of the ventilation fan controller
17 partsGPL-3.0 - 2 layers119.4 × 96.5 mm
- 4 layers45.7 × 88.9 mm
- 4 layers336.7 × 281.1 mm
Questions
How big is the HUB MPE PCB?
It measures 117 × 107 mm and has 4 copper layers, 1.61 mm thick.
What parts does the HUB MPE use?
257 parts, built around the SN65HVD72DRBR, ESP32-S3-MINI-1-N4R2, RTL8305NB-VB-CG and CD4093BM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HUB MPE KiCad files?
From the felixmanfredi/MPE_HUB repository on GitHub, at the commit this page was made from: the board is MPE_HUB_Board/HUB_MPE.kicad_pcb and its schematic MPE_HUB_Board/HUB_MPE.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the HUB MPE design in my own project?
Its repository states no licence, so its author keeps all rights: ask felixmanfredi before reusing the design.