Skip to the content
2 layers155 × 60 mmEsp32 air monitor, the printed circuit board in 3D

Esp32 air monitor

janvr1/esp32_air_monitor
Size
155 × 60 mm
Copper layers
2
Thickness
1.6 mm
Parts
18
Nets
25
Pads
117
Tracks, vias
150, 81
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
26 Dec 2020
Updated
4 May 2023

Overview

Esp32 air monitor is an open-source printed circuit board by janvr1, from the janvr1/esp32_air_monitor repository on GitHub. It is a 2-layer board of 155 × 60 mm with 18 parts on 25 nets, routed with 150 tracks and 81 vias.

It is built around the SCD30. Its parts include 7 resistors, 5 connectors, 4 switches and 2 ICs. It belongs with the ESP32 boards of this library.

Main components

1

README

readme.md

TO-DO:

  • (SW) Ubidots

Notes:

  • GPIO 6-11: SPI flash
  • GPIO 16-17: PSRAM
  • GPIO 34-39: Input only
  • EWMA filter: alpha = 2*pi*fc*Ts/(1+2*pi*fc*Ts)

Display timings:

  • F_pwm = 312,5 kHz (T=3,2 us)
  • PWM: T_low@100%duty=~20 ns
  • T_transfer = ~22 us (2 rows of 64 pixels * 3 colors)
  • T_row = 200 us (T_transfer + 178 delay)
  • Minimum brightness: T_on = 22 us (transfer time), T_off = 178 us (178 us delay)
  • Maximum brightness: T_on = 200 us (22 us transfer + 178 us delay), T_off = 0 us
  • Frame rate: 200..250 Hz (daylight), 100 Hz (nighttime)

Parts

18
QtyValueFootprintReferences
710kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR1, R2, R3, R4, R5, R6, R7
3SW_Pushqc_attiny:Push_Button_6x6mmSW1, SW2, SW3
2Connector_LED_matrix_64x32esp32_air_monitor:Connector_LED_matrix_64x32J2, J3
1Conn_01x02_MaleConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1
1Connector_Adafruit_VEML7700esp32_air_monitor:Connector_Adafruit_VEML7700J5
1Connector_Pimoroni_BME280esp32_air_monitor:Connector_Pimoroni_BME280J4
1ESP32-DEVKITC-32Desp32_air_monitor:MODULE_ESP32-DEVKITC-32DU1
1SCD30esp32_air_monitor:MODULE_SCD30U2
1SW_DIP_x04Button_Switch_THT:SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mmSW4

Similar boards

  • 2 layers100 × 100 mmAir Quality Sensor, the printed circuit board in 3D

    Air Quality Sensor

    willem-pennings/Air-Quality-Sensor

    Design files for a Home Assistant-compatible air quality sensor/monitor

    17 parts12
  • 2 layers114.2 × 36.8 mmAirbox, the printed circuit board in 3D

    Airbox

    Alacrity-Education/AirBoxV2

    The AirBox V2 Station is an open source air quality monitoring station based on the Sensirion SEN66 sensor. It measures particulate matter, CO2, VOC and NOx, runs on a solar charged lithium cell, and reports over Wi-Fi.

    68 parts6GPL-3.0
  • 2 layers59.2 × 39.4 mmScd30 esp, the printed circuit board in 3D

    Scd30 esp

    Duckle29/InKli

    An ESP32-WROOM32 backpack for an SCD30. Uses a high effeciency Buck converter to try and avoid self heating.

    63 parts1
  • 2 layers120 × 100 mmEnvSensor v2, the printed circuit board in 3D

    EnvSensor v2

    jakubprzybytek/Environmental-Sensors

    162 parts1
  • 2 layers60 × 60 mmMinico2, the printed circuit board in 3D

    Minico2

    artemist/minico2

    A simple CO2 monitor based on the Sensirion SCD-30 and an ESP32. This is intended to have Wi-Fi and Ethernet thought that is not yet implemented

    46 parts
  • 2 layers36 × 57 mmFug, the printed circuit board in 3D

    Fug

    bboe/fug

    Carrier PCB joining a WEMOS D1 Mini (ESP8266) to a Sensirion SCD30 CO2/RH/T sensor. Script-generated KiCad.

    13 partsCC-BY-SA-4.0
  • 4 layers94 × 94 mmWalter feels, the printed circuit board in 3D

    Walter feels

    benmcnelly/walter-hardware

    This repository contains all hardware information about Walter and shields

    154 partsGPL-3.0
  • 4 layers55 × 70 mmEnvsensor, the printed circuit board in 3D

    Envsensor

    bruvv/ENV-sensor-esp32

    Custom ESP32-S3 environmental sensor PCB designed for use with ESPHome and Home Assistant.

    9 partsGPL-3.0

Questions

How big is the Esp32 air monitor PCB?

It measures 155 × 60 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Esp32 air monitor use?

18 parts, built around the SCD30. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Esp32 air monitor KiCad files?

From the janvr1/esp32_air_monitor repository on GitHub, at the commit this page was made from: the board is hw/esp32_air_monitor/esp32_air_monitor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Esp32 air monitor design in my own project?

Its repository states no licence, so its author keeps all rights: ask janvr1 before reusing the design.