
Boards using the MCP1416-E/OT
37 boardsBoards in 30 GitHub repositories, designed in KiCad, that use the MCP1416-E/OT by Microchip Technology (-40℃~+150℃ 1 1.5A 1.5A 20ns 20ns 4.5V~18V 41ns 48ns 650uA Interleaved conduction protection Low Side MOSFET SOT-23-5 Gate Drivers ROHS). See how each wires it, with its parts, size, README and files; the MCP1416-E/OT’s symbol, footprint and pinout are on its own page.
- 4 layers174 × 104 mm

- 4 layers170 × 100 mm

Leviathan V1.3
MotorDynamicsLab/Leviathan
Leviathan Main Controller for Voron 2 / Trident 3D Printers
420 parts124GPL-3.0 - 4 layers122.2 × 115.1 mm

Scan controller kicad
fwachsmuth/Filmkorn-Raw-Scanner
The Filmkorn Raw Scanner, turning 8mm and 16mm films into lossless 12-bit CinemaDNG
170 parts13MIT - 2 layers67.5 × 21.5 mm

- 2 layers100 × 45 mm

DMX PWM LED Driver
tpanajott/DMX512_LedDimmer
Wireless DMX512 controller with remote LED driver boards
57 parts4 - 4 layers106.7 × 69.1 mm

- 4 layers116 × 86.4 mm

- 2 layers105 × 63 mm

Lin bus card
skyguru/signalbroker-lin-transceiver
Download USB drivers for the ESP device, choose driver depending on OS here: https://www.olimex.com/Products/IoT/ESP32/ESP32-POE/open-source-hardware
34 parts3Apache-2.0 - 2 layers42 × 45 mm

- 2 layers98.6 × 53.8 mm

Piaa
soypat/piaa
Industrial extension board for Raspberry Pi Pico (W). RS485, EMI insulated digital input/output pins.
104 parts2GPL-2.0 - 2 layers100 × 100 mm

HotBox
sundr007/HotBox
A benchtop thermal Chamber used to test electronics at elevated ambient temperature. Kicad PCB, STM32 firmware, OpenScad Mechanical
43 parts1GPL-2.0 - 4 layers55 × 35 mm

Iot pwm leddriver
0xjmux/iot_pwm_leddriver
Low-cost ESP8266 based driver for "Dumb" 12V 5050 RGB LED Strips
53 parts - 4 layers82.4 × 100 mm

- 4 layers99.9 × 50.7 mm

- 4 layers100 × 100 mm

Smc power
efebasol/StepperMotorController
Rev A — single-motor bench prototype power board. Feeds the driver board (48 V), the stepper motor brake (24 V) and the logic (5 V / 3V3).
104 parts - 2 layers65 × 56 mm

Barbot hat
eMakerspace/barbot
Design your own drinks... - Use a WordPress configurator to design a drink - Pay the drink with Twint - Grab the data with a python script over the WooCommerce API - Control the robot via the RPi HAT and make the drinks
27 partsGPL-3.0 - 2 layers100 × 100 mm

- 4 layers60 × 45 mm

Hotplate
Keyaan-07/Hotplate
Check out the Project's files on KiCanvas(PCB and Heating element) and Onshape!
85 partsMIT - 2 layers43 × 23 mm

- 2 layers101.6 × 101.6 mm

Relay board hardware
SeniorDesign-2024/Relay-Board
Repo for relay board that controls the charging port connection state
24 parts - 2 layers94.8 × 57.5 mm

HVGene
Teille98/HVGene-OpenHardware
Open-source, digitally controlled high-voltage AC power supply for cold atmospheric plasma (CAP) research, developed with a specific focus on flexible-endoscope decontamination applications.
33 parts - 2 layers

Lastenrad
timmy31113/lastenrad
Control system for a prototype cargo bike with a bio-electric hybrid drivetrain concept
13 parts - 4 layers90 × 90 mm

02 connectivity
tomek-szczesny/byos_m2
Build Your Own System - a collection of stackable add-ons
110 parts - 2 layers164.6 × 57 mm

VF MOTOR DRIVER
virtual-fly/VF_MOTOR_DRIVER
VF_Motor_Driver is an open hardware power distribution board, designed to be part of a larger modular system. This design is based in part on the OpenFFBoard TMC4671 driver board, licensed under the GNU General Public…
234 partsGPL-3.0