

Lastenrad
Control system for a prototype cargo bike with a bio-electric hybrid drivetrain concept
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 13
- Nets
- 44
- Pads
- 83
- Tracks, vias
- 49, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 4 May 2021
- Updated
- 9 Aug 2026
Overview
Lastenrad is an open-source printed circuit board by timmy31113, from the timmy31113/lastenrad repository on GitHub. It is a 2-layer board with 13 parts on 44 nets, routed with 49 tracks and 0 vias.
It is built around the NXE2S1215MC-R7, MCP1416-E/OT and BSB044N08NN3 G. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3NXE2S1215MC-R7
SMD-5P,12.7x10.4mm-40℃~+85℃ 1 10.2mm 10.8V~13.2V 100kHz 10uF 133mA 15V 19.5mm 2.8mA 2W 3kV 6.1mm 60mVp-p 79% Short Circuit Protection SMD-5P,12.7x10.4mm Isolated Power Modules ROHSMurataIsolated Power ModulesMCP1416-E/OT
SOT-23-5-40℃~+150℃ 1 1.5A 1.5A 20ns 20ns 4.5V~18V 41ns 48ns 650uA Interleaved conduction protection Low Side MOSFET SOT-23-5 Gate Drivers ROHSMicrochip TechnologyGate DriversBSB044N08NN3 G
MG-DSON-2(4.9x6.3)mmMG-DSON-2(4.9x6.3)mm MOSFETs ROHSInfineon TechnologiesMOSFETs
README
README.mdlastenrad
Control system for a prototype cargo bike with a bio-electric hybrid drivetrain concept
This project contains the code for an Arduino controlling the electric systems of a three wheeled Dutch-style cargo bike.
-
A synchronous permanently commutated three-phase AC hub motor drives the rear wheel. It is powered by an external motor controller with current and movement direction control. The motor and controller also allow a regenerative braking function.
-
The cyclists pedals into a synchronous permanently commutated three-phase AC generator with a gear transmission. The generator load is regulated by a power-MOSFET performing PWM after rectification. A current sensor indicates how much power the cyclist is putting into the generator.
-
The UI provides adjustment options for the desired degree of electric assist and the target pedaling RPM and torque.
The system aims to simulate an automatic CVT gearbox and the goal is an intuitive and comfortable driving experience that allows the cyclist to concentrate on the road situation while maintaining optimal power delivery to the wheel.
Parts
13| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 100k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2, R4 |
| 2 | 47k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3, R5 |
| 2 | A1363xKTTN-1 | Sensor_Current:Allegro_SIP-4 | Hallsensor-Tretlagerwelle-1, Hallsensor-Tretlagerwelle-2 |
| 2 | BSB044N08NN3 | Package_DirectFET:DirectFET_MN | Generator-PWM-MOSFET1, Hauptschalter-MOSFET1 |
| 2 | NXE2S1215MC | Converter_DCDC:Converter_DCDC_muRata_NXExSxxxxMC_SMD | 6V1, 12V1 |
| 1 | ACS712xLCTR-05B | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Stromsensor1 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | MCP1416 | Package_TO_SOT_SMD:SOT-23-5 | MOSFET-Treiber1 |
Similar boards
- 4 layers174 × 104 mm

- 4 layers170 × 100 mm

Leviathan V1.3
MotorDynamicsLab/Leviathan
Leviathan Main Controller for Voron 2 / Trident 3D Printers
420 parts124GPL-3.0 - 4 layers122.2 × 115.1 mm

Scan controller kicad
fwachsmuth/Filmkorn-Raw-Scanner
The Filmkorn Raw Scanner, turning 8mm and 16mm films into lossless 12-bit CinemaDNG
170 parts13MIT - 2 layers67.5 × 21.5 mm

- 2 layers100 × 45 mm

DMX PWM LED Driver
tpanajott/DMX512_LedDimmer
Wireless DMX512 controller with remote LED driver boards
57 parts4 - 4 layers106.7 × 69.1 mm

- 4 layers116 × 86.4 mm

- 2 layers105 × 63 mm

Lin bus card
skyguru/signalbroker-lin-transceiver
Download USB drivers for the ESP device, choose driver depending on OS here: https://www.olimex.com/Products/IoT/ESP32/ESP32-POE/open-source-hardware
34 parts3Apache-2.0
Questions
What parts does the Lastenrad use?
13 parts, built around the NXE2S1215MC-R7, MCP1416-E/OT and BSB044N08NN3 G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Lastenrad KiCad files?
From the timmy31113/lastenrad repository on GitHub, at the commit this page was made from: the board is electronics/Lastenrad.kicad_pcb and its schematic electronics/Lastenrad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Lastenrad design in my own project?
Its repository states no licence, so its author keeps all rights: ask timmy31113 before reusing the design.