
Horizon
Horizon-Avionics/Horizon-H1
Building a fully open-source flight computer for amateur rocketry!

The Filmkorn Raw Scanner, turning 8mm and 16mm films into lossless 12-bit CinemaDNG
Scan controller kicad is an open-source printed circuit board by fwachsmuth, from the fwachsmuth/Filmkorn-Raw-Scanner repository on GitHub, published under the MIT licence. It is a 4-layer board of 122.2 × 115.1 mm with 170 parts on 124 nets, routed with 1,575 tracks and 241 vias.
It is built around the ATMEGA328-PU, DRV8871DDA and LGS5145, with the LM358, MCP1416-E/OT and QRE1113 among its other parts. Its parts include 51 resistors, 33 capacitors, 9 ICs, 8 diodes and 8 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Another DIY film scanner?
Yes, but this one is different: the Filmkorn Raw Scanner is an open‑source project that enables digitizing small‑gauge films at breathtaking quality for a very low price. The project began in 2020 after a bet on the German Filmvorführerforum, when the infamous but similarly priced “Wolverine” film scanner from China (aka Somikon, aka Winait, aka Kodak, aka Hammacher‑Schlemmer) turned out to be an irredeemable film‑scratching disaster: Is it even possible to build a truly high‑quality scanner for under €500?
Yes, it is. Now anyone can build a scanner that digitizes their films gently and in fantastic quality.
(Click to play on Youtube)
Special offer: Send me detailed photos and a description of converting another projector (Bauer, Eumig, whatever) for publication on this page, and I’ll refund the cost of the Scan‑Controller on request!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | 100n | Capacitor_SMD:C_0805_2012Metric | C5, C6, C8, C10, C11, C13, C18, C20, C21, C22, C23, C26, C28, C30, C31 |
| 11 | 10K | Resistor_SMD:R_0805_2012Metric | R2, R4, R12, R15, R35, R36, R40, R42, R44, R45, R50 |
| 6 | 47K | Resistor_SMD:R_0805_2012Metric | R9, R14, R25, R34, R39, R49 |
| 5 | 100K | Resistor_SMD:R_0805_2012Metric | R13, R21, R23, R32, R48 |
| 5 | 10u | Capacitor_SMD:C_1210_3225Metric | C1, C19, C25, C27, C32 |
| 5 | 1u | Capacitor_SMD:C_0805_2012Metric | C3, C12, C14, C16, C33 |
| 5 | TestPoint | Peacemans_Teile:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm_named | TP5, TP6, TP14, TP15, TP16 |
| 4 | 3K3 | Resistor_SMD:R_0805_2012Metric | R7, R24, R27, R38 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2, H3, H4 |
| 3 | 10K | easyeda2kicad:RES-ADJ-TH_3P-L10.0-W10.0-P2.50-L | RV1, RV2, RV3 |
| 3 | 10K | Resistor_SMD:R_1206_3216Metric | R41, R46, R47 |
| 2 | 100R | Resistor_SMD:R_0603_1608Metric | R3, R5 |
| 2 | 10K | easyeda2kicad:RES-TH_RK09K1110A0J_short | RV4, RV5 |
| 2 | 22K | Resistor_SMD:R_0805_2012Metric | R28, R37 |
| 2 | 22p | Capacitor_SMD:C_0805_2012Metric | C7, C9 |
| 2 | 2K2 | Resistor_SMD:R_0805_2012Metric | R10, R26 |
| 2 | 300R | Resistor_SMD:R_0805_2012Metric | R11, R29 |
| 2 | 3K | Resistor_SMD:R_0805_2012Metric | R22, R30 |
| 2 | 470K | Resistor_SMD:R_0805_2012Metric | R20, R31 |
| 2 | 470u | easyeda2kicad:CAP-SMD_BD12.5-L13.0-W13.0-RD | C4, C15 |
| 2 | 47K | Resistor_SMD:R_0603_1608Metric | R1, R6 |
| 2 | GND | Peacemans_Teile:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm_named | TP2, TP11 |
| 2 | QRE1113 | easyeda2kicad:OPTO-SMD_QRE1113GR | U1, U2 |
| 2 | SS54 | Diode_SMD:D_SMA | D4, D10 |
| 2 | SS8050 | Package_TO_SOT_SMD:SOT-23 | Q5, Q6 |
| 1 | 0.05R | Resistor_SMD:R_2512_6332Metric | R18 |
| 1 | 0R | Resistor_SMD:R_0805_2012Metric | R51 |
| 1 | 10uH | easyeda2kicad:IND-SMD_L4.4-W4.2 | L2 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric | R8 |
| 1 | 1N4007 | Diode_SMD:D_SOD-123F | D8 |
| 1 | 1N4148W | Diode_SMD:D_SOD-123 | D5 |
| 1 | 1n | Capacitor_SMD:C_0805_2012Metric | C34 |
| 1 | 220R | Resistor_SMD:R_0805_2012Metric | R33 |
| 1 | 220u | easyeda2kicad:CAP-SMD_BD12.5-L13.0-W13.0-FD | C2 |
| 1 | 22u | Capacitor_SMD:CP_Elec_6.3x7.7 | C17 |
| 1 | 24V | Peacemans_Teile:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm_named | TP1 |
| 1 | 24V in | easyeda2kicad:CONN-TH_2P-P5.08_KF142R-5.08-2P | CN1 |
| 1 | 25K | easyeda2kicad:RES-ADJ-TH_3P-L10.0-W10.0-P2.50-L | RV6 |
| 1 | 270R | Resistor_SMD:R_0805_2012Metric | R16 |
| 1 | 2K7 | Resistor_SMD:R_0805_2012Metric | R43 |
| 1 | 30K | Resistor_SMD:R_0805_2012Metric | R19 |
| 1 | 47u | Capacitor_SMD:C_1206_3216Metric | C24 |
| 1 | 47uH | easyeda2kicad:IND-SMD_L13.8-W12.6_YSPI13XX | L1 |
| 1 | 71K5 | Resistor_SMD:R_0805_2012Metric | R17 |
| 1 | 74LVC14 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U9 |
| 1 | 8MHz | Crystal:Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | < | easyeda2kicad:KEY-TH_4P-L12.0-W12.0-P5.0-LS12.5-EH-small | SW8 |
| 1 | << | easyeda2kicad:KEY-TH_4P-L12.0-W12.0-P5.0-LS12.5-EH-small | SW5 |
| 1 | > | easyeda2kicad:KEY-TH_4P-L12.0-W12.0-P5.0-LS12.5-EH-small | SW9 |
| 1 | >> | easyeda2kicad:KEY-TH_4P-L12.0-W12.0-P5.0-LS12.5-EH-small | SW10 |
| 1 | ATmega328P | Package_QFP:TQFP-32_7x7mm_P0.8mm | U5 |
| 1 | CS12N06AE-G | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q1 |
| 1 | D10 | Peacemans_Teile:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm_named | TP8 |
| 1 | D7 | Peacemans_Teile:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm_named | TP4 |
| 1 | DMG2305UX | Package_TO_SOT_SMD:SOT-23 | Q4 |
| 1 | DMMT5401 | Package_TO_SOT_SMD:SOT-23-6 | Q7 |
| 1 | DRV8871DDA | Package_SO:Texas_HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalVias | U4 |
| 1 | FTDI | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | Fan | easyeda2kicad:CONN-TH_3P-P2.54_DIBO_DB141R-2.54-3P | CN3 |
| 1 | Film End | Peacemans_Teile:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm_named | TP3 |
| 1 | Film End Eye | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | Film End Eye | easyeda2kicad:CONN-TH_3P-P2.54_DIBO_DB141R-2.54-3P | CN5 |
| 1 | GPIO27 | Peacemans_Teile:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm_named | TP12 |
| 1 | GPIO6 | Peacemans_Teile:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm_named | TP13 |
| 1 | ICSP | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J5 |
| 1 | IRLML2502 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | IRLML6402 | Package_TO_SOT_SMD:SOT-23 | Q3 |
| 1 | LGS5145 | easyeda2kicad:SOT-23-6_L2.9-W1.7-P0.95-LS2.8-BL | U10 |
| 1 | LM358 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U8 |
| 1 | Lamp | easyeda2kicad:CONN-TH_3P-P2.54_DIBO_DB141R-2.54-3P | CN4 |
| 1 | Lamp | easyeda2kicad:KEY-TH_4P-L12.0-W12.0-P5.0-LS12.5-EH-small | SW4 |
| 1 | Lamp (wh) | LED_SMD:LED_0805_2012Metric | D6 |
| 1 | MCP1416 | Package_TO_SOT_SMD:SOT-23-5 | U11 |
| 1 | Main Shaft | Peacemans_Teile:TestPoint_THTPad_1.5x1.5mm_Drill0.7mm_named | TP10 |
| 1 | Motor | easyeda2kicad:CONN-TH_2P-P5.08_KF142R-5.08-2P | CN2 |
| 1 | NH6375A50P | easyeda2kicad:SOT-89-3_L4.5-W2.5-P1.50-LS4.2-BR | U3 |
| 1 | No Film (re) | LED_SMD:LED_0805_2012Metric | D3 |
| 1 | PMEG6020ER | Diode_SMD:D_SOD-123F | D9 |
| 1 | Power | easyeda2kicad:KEY-TH_1825027-8 | SW1 |
| 1 | Power (gr) | LED_SMD:LED_0805_2012Metric | D1 |
The 149 most common of 170 parts.

Horizon-Avionics/Horizon-H1
Building a fully open-source flight computer for amateur rocketry!

knivier/SkyCell
The telecommunications solution on a balloon...for broke people alike.

hasenbanck/heteromycin
A 3D printer board using a powerfull STM32 MCU, TMC5160/TMC2160 driver and a Raspberry Pi or compatible SBC



heyspacebuck/huffboard
A carrier board for a Raspberry Pi 4 running Huffbox controls. Drives relays and a SPI bus.


It measures 122.2 × 115.1 mm and has 4 copper layers, 1.6 mm thick.
170 parts, built around the ATMEGA328-PU, DRV8871DDA, LGS5145 and LM358. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the fwachsmuth/Filmkorn-Raw-Scanner repository on GitHub, at the commit this page was made from: the board is scan-controller/scan-controller-kicad/scan-controller-kicad.kicad_pcb and its schematic scan-controller/scan-controller-kicad/5V_3A_Regulator.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).