Skip to the content
4 layers200 × 100 mmHeteromycin, the printed circuit board in 3D

A 3D printer board using a powerfull STM32 MCU, TMC5160/TMC2160 driver and a Raspberry Pi or compatible SBC

Size
200 × 100 mm
Copper layers
4
Thickness
1.6 mm
Parts
373
Nets
330
Pads
1,664
Tracks, vias
3,342, 723
Pours
52
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
12 Oct 2018
Updated
30 Apr 2020

Overview

Heteromycin is an open-source printed circuit board by hasenbanck, from the hasenbanck/heteromycin repository on GitHub. It is a 4-layer board of 200 × 100 mm with 373 parts on 330 nets, routed with 3,342 tracks and 723 vias.

It is built around the STM32H743VIT6, TMC2160-TA and DM3D-SF, with the CAT24C32LI-, IRLML0030TRPBF and BAT54GWJ among its other parts. Its parts include 129 resistors, 115 capacitors, 49 transistors, 27 diodes and 25 connectors. It belongs with the robots and motor control boards and the STM32 boards of this library.

Main components

12

README

README.md

Heteromycin - 3D printer board

Heteromycin is a 3D printer controller that aims to provide a full stack user experience around Octoprint / Marlin using a custom designed board that integrates a Raspberry Pi 3 or Zero W. It will also provide a solid, powerfull hardware by utilizing quality components, a STM32 32bit MCU and powerfull TMC5160 or TMC2160 driver (SD / SPI mode).

heteromycin version 1.0

Features

  • 32bit STM32H743VI 400Mhz / 1024KiB RAM / 2MiB Flash MCU / 4 KiB EEPROM
  • Integrated Raspberry Pi 3 / Zero W HAT connector as the main user interface
  • Integrated DC/DC switching module for 5V / 3.3V power supply
  • 5x TMC5160 or TMC2160 stepper driver with 8x external Power MOSFET each
  • 3x high power MOSFET for heating (2x heater, 1x heatbed, 24V)
  • 4x low power MOSFET for fans (5V or 24V)
  • 40 pin external connector for STM32 and Pi GPIO pins
    • GPIO
    • PWM
    • UART
    • SPI
    • I2C
    • 3.3V / 5V / GND for external power consumption
  • Micro SD Card for storing GCODE files (directa MCU access)
  • Designed for a 24V power supply
  • Automotive fuses
  • Quality connectors
  • Octoprint plugin for flashing the firmware of the board (STM32)

Roadmap

  • Hardware
    • Describe the general functionality and select the main components
    • Draw the schematics of the PCB
    • Placement & routing of the PCB
    • Production of a development board
    • Testing the PCB
    • Repreat until hardware is finished
  • Software
    • Write arduino core board definition once first PCB design is finished
    • Write PIN file for Marlin
    • Test board (esp. the TMC*160 driver)
    • Octoprint plugin for firmware upgrade
    • STM32flash rewrite (fix I2C and add SPI, maybe rewrite in rust)
    • Create a script / image with Octoprint with the plugin / tools preinstalled
    • Documentation

Alternative Parts

Stepper driver

You can use both TMC5160 or TMC2160 as the stepper driver, since they both are functionally / pin equal when used in SD / SPI-Mode.

It doesn't mater choosing one over the other, other than price and availability.

Fine tuning of the MOSFET driver may be necessary.

License

The hardware is licensed under CERN OHL version 1.2. The software is licensed under GNU GPL v3.

The files under PCB/packages3d are excluded from this license and are provided under fair use terms for this open-source project.

Parts

373
QtyValueFootprintReferences
44IRLML0030TRPbFPackage_TO_SOT_SMD:SOT-23Q10, Q14, Q15, Q16, Q17, Q18, Q19, Q20, Q21, Q22, Q23, Q24, Q25, Q26, Q27, Q28 +28
4010Resistor_SMD:R_0603_1608MetricR21, R22, R23, R24, R27, R28, R29, R30, R103, R104, R105, R106, R109, R110, R111, R112 +24
36100nFCapacitor_SMD:C_0603_1608MetricC1, C16, C17, C18, C19, C22, C23, C24, C25, C26, C103, C104, C112, C113, C114, C115 +20
20220nFCapacitor_SMD:C_0603_1608MetricC41, C42, C43, C44, C57, C58, C59, C60, C73, C74, C75, C76, C105, C106, C107, C108 +4
2047Resistor_SMD:R_0603_1608MetricR17, R18, R19, R20, R48, R49, R50, R51, R65, R66, R67, R68, R82, R100, R101, R102 +4
1847kResistor_SMD:R_0603_1608MetricR1, R5, R14, R15, R45, R46, R62, R63, R79, R80, R113, R114, R115, R116, R117, R118 +2
18BAT54GWJDiode_SMD:D_SOD-123D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25 +2
15100uFCapacitor_THT:CP_Radial_D6.3mm_P2.50mmC2, C4, C5, C6, C7, C32, C38, C48, C54, C64, C70, C80, C86, C96, C102
15470nFCapacitor_SMD:C_0603_1608MetricC37, C45, C46, C53, C61, C62, C69, C77, C78, C85, C93, C94, C101, C109, C110
122.2uFCapacitor_SMD:C_0603_1608MetricC28, C30, C35, C36, C51, C52, C67, C68, C83, C84, C99, C100
100.1Resistor_SMD:R_2512_6332MetricR25, R26, R56, R57, R73, R74, R90, R91, R107, R108
104.7kResistor_SMD:R_0603_1608MetricR12, R13, R119, R120, R121, R122, R123, R124, R125, R126
8100kResistor_SMD:R_0603_1608MetricR10, R34, R35, R36, R39, R40, R43, R44
870543-0001heteromycin:70543-0001J13, J14, J15, J16, J17, J18, J19, J20
7100Resistor_SMD:R_0603_1608MetricR31, R32, R33, R37, R38, R41, R42
670543-0003heteromycin:70543-0003J6, J7, J8, J9, J10, J21
5100nFCapacitor_SMD:C_1812_4532MetricC3, C8, C9, C10, C11
51kResistor_SMD:R_0603_1608MetricR8, R11, R127, R128, R129
52.2Resistor_SMD:R_0603_1608MetricR16, R47, R64, R81, R98
522nFCapacitor_SMD:C_0603_1608MetricC34, C50, C66, C82, C98
5TMC2160-TAheteromycin:TQFP-48-1EP_7x7mm_P0.5mm_EP5x5mm_ThermalViasU6, U7, U8, U9, U10
43557-2heteromycin:KEYSTONE-FUSE-3557-2F1, F2, F3, F4
4MountingHole_3.2mm_M3_Padheteromycin:MountingHole_3.2mm_M3_PadH3, H4, H6, H7
370543-0002heteromycin:70543-0002J22, J23, J24
3MPZ1608S221AResistor_SMD:R_0603_1608MetricFB1, FB2, FB3
3MountingHole_2.7mm_M2.5_Padheteromycin:MountingHole_2.7mm_M2.5_PadH1, H2, H5
3PSMN1R2-30YLC,115heteromycin:SOT-669_LFPAK_ThermalVias-1Q11, Q12, Q13
3SK310A-LTPDiode_SMD:D_SMAD7, D8, D9
3SMAJ28ADiode_SMD:D_SMAD1, D2, D3
210kResistor_SMD:R_0603_1608MetricR4, R9
210uFCapacitor_SMD:C_1206_3216MetricC15, C111
21uFCapacitor_SMD:C_0603_1608MetricC20, C21
222uFCapacitor_SMD:C_1206_3216MetricC12, C14
23.9KResistor_SMD:R_0603_1608MetricR2, R3
239531-1002heteromycin:39531-1002J3, J4
2CAT24C32Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU1, U4
1100nFCapacitor_SMD:C_1206_3216MetricC13
115kResistor_SMD:R_0603_1608MetricR7
120021121-00010C4LFConnector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMDJ12
120kResistor_SMD:R_0603_1608MetricR6
14DB-P108-06heteromycin:4DB-P108-06J2
1AP7365-33WG-7Package_TO_SOT_SMD:SOT-23-5U3
1Conn_02x03_Counter_ClockwiseConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_VerticalJ5
1Conn_02x20_Odd_EvenConnector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical_SMDJ25
1DM3D-SFConnector_Card:microSD_HC_Hirose_DM3D-SFJ11
1DMG2305UXPackage_TO_SOT_SMD:SOT-23Q2
1DMMT5401Package_TO_SOT_SMD:SOT-23-6Q1
1ECS-TXO-3225-250-TRheteromycin:ECS-TXO-3225X1
1Jumper_2_OpenConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJP1
1LTST-C194KGKTLED_SMD:LED_0603_1608MetricD5
1LTST-C194KSKTLED_SMD:LED_0603_1608MetricD6
1Logo_Open_Hardware_LargeSymbol:OSHW-Logo2_14.6x12mm_SilkScreenLOGO1
1M20-7832046Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_VerticalJ1
1PTS645VL39-2Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx39-2LFSSW1
1S3A-13-FDiode_SMD:D_SMCD4
1STM32H743VIheteromycin:TQFP-100_14x14mm_P0.5mmU5
1i3Aheteromycin:i3AU2

Similar boards

  • 4 layers140 × 104 mmRemram, the printed circuit board in 3D

    Remram

    hasenbanck/remram

    32bit STM32F7 based 3D printing controller using TMC2130 stepper driver

    264 parts40
  • 4 layers162 × 100 mmIGBT board, the printed circuit board in 3D

    IGBT board

    paltatech/half-bridge

    TO247 half bridge module for EVs

    260 parts18
  • 4 layers81 × 80 mmBreakout, the printed circuit board in 3D

    Breakout

    nischayhegde/jetson_spi_to_can_x8_breakout

    A PCB board for expanding the SPI channels on Jetson Orin nano super into 8 CANfd channels. Comes with chip select logic and jetpack drivers. Supports 1Mbit per CAN channel.

    145 parts1
  • 2 layers105 × 42.1 mmCpld, the printed circuit board in 3D

    Cpld

    RadoslawSajdak/CPLD_PCB

    34 parts
  • 2 layers60 × 46.5 mmCounter timer, the printed circuit board in 3D

    Counter timer

    theSusurrus/counter-hw

    35 parts
  • 2 layers62 × 92 mmElectronicsPCB, the printed circuit board in 3D

    ElectronicsPCB

    CUSail-Navigation/PCB-FA25-SP26

    This is a repository containing the PCBs designed during the FA25-SP26 academic year. Due to high compatibility and relative ease of use, all of these files are made with KiCad.

    54 parts
  • 4 layers140 × 100 mmRecline actuator controller, the printed circuit board in 3D

    Recline actuator controller

    Accessibilita/recline-controls

    Hardware project for open source wheel chair recline control electronics

    181 partsCERN-OHL-S-2.0

Questions

How big is the Heteromycin PCB?

It measures 200 × 100 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Heteromycin use?

373 parts, built around the STM32H743VIT6, TMC2160-TA, DM3D-SF and CAT24C32LI-. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Heteromycin KiCad files?

From the hasenbanck/heteromycin repository on GitHub, at the commit this page was made from: the board is heteromycin.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Heteromycin design in my own project?

Its repository states no licence, so its author keeps all rights: ask hasenbanck before reusing the design.