4 layers200 × 100 mm
Heteromycin
hasenbanck/heteromycin
A 3D printer board using a powerfull STM32 MCU, TMC5160/TMC2160 driver and a Raspberry Pi or compatible SBC
373 parts40
DMMT5401
Diodes IncorporatedExtended
-55℃~+150℃ 150V 2 PNP 200mA 200mV 300MHz 300mW 50uA 5V 60 PNP SOT-26(SC74R) Bipolar (BJT) ROHS
- Part id
- diodes/DMMT5401
- Category
- Bipolar (BJT)
- Package
- SOT-26(SC74R)
- Pins
- 6
- In stock
- 2,663 at JLCPCB (C154733)
- Used on
- 73 open-source boards
Overview
The DMMT5401 is a bipolar made by Diodes Incorporated in a SOT-26(SC74R) package with 6 pins. -55℃~+150℃ 150V 2 PNP 200mA 200mV 300MHz 300mW 50uA 5V 60 PNP SOT-26(SC74R) Bipolar (BJT) ROHS.
PCBKit's library has its KiCad symbol (Transistor_BJT:DMMT5401, from KiCad's library) and its footprint (Package_TO_SOT_SMD:SOT-23-6, from KiCad's library), ready for a KiCad board. 2,663 are in stock at JLCPCB (part C154733). 73 open-source boards in 54 repositories on GitHub use it.
Symbol
Footprint
From the datasheet
6- Collector-emitter, most
- 150 V · Collector-emitter voltage, absolute max · p. 2
- Collector current, most
- 200 mA · Continuous collector current, max at TA = +25°C · p. 2
- Junction, hottest
- 150 °C · Junction temperature, max · p. 2
- Junction to air (SOT26 (SC74R))
- 417 K/W · Junction to ambient, maximum combined dissipation; PCB mounting per Note 5 · p. 2
- Current gain, least
- 50 · DC current gain, min at IC = -1mA, VCE = -5V · p. 2
- Current gain, least
- 60 · DC current gain, min at IC = -10mA, VCE = -5V · p. 2
What it is and has
6- Transistors
- Dual PNP, 150V, small signal · p. 1
- Matched tolerance
- 2% for hFE, VCE(SAT), VBE(SAT) · p. 1
- Package
- SOT26 (SC74R) · p. 1
- Construction
- Epitaxial planar die · p. 1
- Compliance
- Lead-free and RoHS compliant · p. 1
- Materials
- Halogen and antimony free · p. 1
Specifications
24| Parameter | Conditions | As printed | Page |
|---|---|---|---|
| Collector-Base Voltage VCBO | TA = +25°C | max -160 V | 2 |
| Collector-Emitter Voltage VCEO | TA = +25°C | max -150 V | 2 |
| Emitter-Base Voltage VEBO | TA = +25°C | max -5 V | 2 |
| Continuous Collector Current IC | TA = +25°C | max -200 mA | 2 |
| Power Dissipation PD | TA = +25°C; Notes 5 & 6; maximum combined dissipation | max 300 mW | 2 |
| Thermal Resistance, Junction to Ambient RJA | TA = +25°C; Note 6 | max 417 C/W | 2 |
| Operating and Storage Temperature Range TJ, TSTG | min -55 · max 150 C | 2 | |
| Collector-Base Breakdown Voltage BVCBO | TA = +25°C; IC = -100uA, IE = 0; Note 7 | min -160 V | 2 |
| Collector-Emitter Breakdown Voltage BVCEO | TA = +25°C; IC = -1mA, IB = 0; Note 7 | min -150 V | 2 |
| Emitter-Base Breakdown Voltage BVEBO | TA = +25°C; IE = -10uA, IC = 0; Note 7 | min -5 V | 2 |
| Collector-Base Cutoff Current ICBO | TA = +25°C; VCB = -120V, IE = 0; Note 7 | max -50 nA | 2 |
| Collector-Base Cutoff Current ICBO | VCB = -120V, IE = 0, TA = +100°C; Note 7 | max -50 uA | 2 |
| Emitter-Base Cutoff Current IEBO | TA = +25°C; VEB = -3V, IB = 0; Note 7 | max -50 nA | 2 |
| DC Current Gain (Note 8) hFE | TA = +25°C; IC = -1mA, VCE = -5V; Note 7 | min 50 | 2 |
| DC Current Gain (Note 8) hFE | TA = +25°C; IC = -10mA, VCE = -5V; Note 7 | min 60 · max 240 | 2 |
| DC Current Gain (Note 8) hFE | TA = +25°C; IC = -50mA, VCE = -5V; Note 7 | min 50 | 2 |
| Collector-Emitter Saturation Voltage VCE(SAT) | TA = +25°C; IC = -10mA, IB = -1mA; Note 7 | max -0.2 V | 2 |
| Collector-Emitter Saturation Voltage VCE(SAT) | TA = +25°C; IC = -50mA, IB = -5mA; Note 7 | max -0.5 V | 2 |
| Base-Emitter Saturation Voltage VBE(SAT) | TA = +25°C; IC = -10mA, IB = -1mA; Note 7 | max -1 V | 2 |
| Base-Emitter Saturation Voltage VBE(SAT) | TA = +25°C; IC = -50mA, IB = -5mA; Note 7 | max -1 V | 2 |
| Current Gain-Bandwidth Product fT | TA = +25°C; VCE = -10V, IC = -10mA, f = 100MHz | min 100 · max 300 MHz | 2 |
| Output Capacitance COBO | TA = +25°C; VCB = -10V, f = 1.0MHz, IE = 0mA | max 6 pF | 2 |
| Small Signal Current Gain hfe | TA = +25°C; VCE = -10V, IC = -1mA, f = 1.0kHz | min 40 · max 200 | 2 |
| Noise Figure NF | TA = +25°C; VCE = -5V, IC = -200uA, RS = 10Ω, f = 1.0kHz | max 8 dB | 2 |
Ordering codes, by the datasheet
1- DMMT5401-7-F
- SOT26 (SC74R) · Standard compliance; K4S marking; 7-inch reel, 8 mm tape, 3,000 per reel · p. 1
- 2 layers65 × 56.5 mm
- 2 layers128.8 × 110 mm
- 4 layers122.2 × 115.1 mm
Scan controller kicad
fwachsmuth/Filmkorn-Raw-Scanner
The Filmkorn Raw Scanner, turning 8mm and 16mm films into lossless 12-bit CinemaDNG
170 parts13MIT - 2 layers65 × 56 mm
- 2 layers124 × 116 mm
Huffboard
heyspacebuck/huffboard
A carrier board for a Raspberry Pi 4 running Huffbox controls. Drives relays and a SPI bus.
77 parts8 - 2 layers129.5 × 72.6 mm
- 4 layers38.5 × 100 mm
Parts like it
8
CJ2045
SOT-23-6L-55℃~+150℃ 1 NPN + 1 PNP 1.5A 180 20nA 30V 350mW 375mV 7V NPN+PNP SOT-23-6L Bipolar (BJT) ROHSJiangsu Changjing Electronics Technology (CJ)Bipolar (BJT)SEBT818BA
SOT-23-6L1 PNP 1.2W 100 20uA 210mV 30V 3A 5V PNP SOT-23-6L Bipolar (BJT) ROHSSINO-ICBipolar (BJT)MMDT3906SG
SOT-23-6-55℃~+150℃ 1 PNP 1W 200mA 250MHz 250mV 300 40V 50nA 6V PNP SOT-23-6 Bipolar (BJT) ROHSPJSEMIBipolar (BJT)ZXTC2045E6TA
SOT-26-55℃~+150℃ 1 NPN + 1 PNP 1.5A 180 20nA 265MHz 30V 375mV 5.6W 7V NPN+PNP SOT-26 Bipolar (BJT) ROHSDiodes IncorporatedBipolar (BJT)BC817DPN_R1_00001
SOT-23-6L-55℃~+150℃ 1 NPN + 1 PNP 100MHz 100nA 330mW 45V 500mA 5V 600 700mV NPN+PNP SOT-23-6L Bipolar (BJT) ROHSPANJIT InternationalBipolar (BJT)PT236T30E2
SOT-23-6L1 PNP 1.2W 100 20uA 30V 3A 500mV 5V PNP SOT-23-6L Bipolar (BJT) ROHSShanghai Prisemi ElecBipolar (BJT)PBSS4160DS(TP)
SOT-23-6SOT-23-6 Bipolar (BJT) ROHSTECH PUBLICBipolar (BJT)MMDT3946F
SOT-23-6LBipolar (BJT)YFW
Questions
Is there a KiCad symbol and footprint for the DMMT5401?
Yes. The symbol is Transistor_BJT:DMMT5401 and the footprint Package_TO_SOT_SMD:SOT-23-6, both drawn on this page. PCBKit places them on a board for you when you design with it.
What package is the DMMT5401?
SOT-26(SC74R), with 6 pins. Its footprint is drawn on this page.
Where is the DMMT5401 datasheet?
Diodes Incorporated publishes it: the Datasheet link on this page opens it.
Where can I order the DMMT5401?
JLCPCB lists it as part C154733, with 2,663 in stock; the sellers' links on this page open their listings.
What can replace the DMMT5401?
Parts like it in the library: the CJ2045 by Jiangsu Changjing Electronics Technology (CJ), the SEBT818BA by SINO-IC, the MMDT3906SG by PJSEMI and the ZXTC2045E6TA by Diodes Incorporated. Check their datasheets: a part that fits the footprint may still differ in its ratings.
Which open-source boards use the DMMT5401?
73 boards in 54 repositories on GitHub; the most starred are listed on this page, with their KiCad files.