Skip to the content

Boards using the ATTINY13A-PU

35 boards

Boards in 32 GitHub repositories, designed in KiCad, that use the ATTINY13A-PU by Microchip Technology (-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 6 64Byte 64Byte 8 Bit AVR Built-in FLASH DIP-8 Microcontrollers (MCU/MPU/SOC) ROHS). See how each wires it, with its parts, size, README and files; the ATTINY13A-PU’s symbol, footprint and pinout are on its own page.

  • 2 layers99.7 × 63.9 mmNES CN ROM-256-05, the printed circuit board in 3D

    NES CN ROM-256-05

    emeargt/nes-cnrom

    KiCad project for NES-CN-ROM-256-05 cartridge schematic and PCB

    17 parts31CC-BY-SA-4.0
  • 2 layers100 × 61.4 mmCart, the printed circuit board in 3D

    Cart

    digilogistist/The-Open-Source-USB-NES-Project

    USB-NES and NES-FASTGFX product engineering repository

    38 parts24CC0-1.0
  • 2 layers100 × 100 mmMotherboard, the printed circuit board in 3D

    Motherboard

    Terminus-IMRC/RPiCluster2

    Yet another Raspberry Pi cluster, version 2

    334 parts9
  • 2 layers22.9 × 30.7 mmOnewire led, the printed circuit board in 3D

    Onewire led

    kcuzner/onewire-leds

    An RGB LED driver on a modified one-wire bus

    11 parts4MIT
  • 4 layers243.8 × 243.8 mmSbc 8088, the printed circuit board in 3D

    Sbc 8088

    miselin/M88

    The M88 Computer

    218 parts2CERN-OHL-P-2.0
  • 6 layers100.1 × 112 mmPicones, the printed circuit board in 3D

    Picones

    WiiMake/picones

    In the last 40 years, technology has advanced to the point were what used to be done in hardware can now be done in software. This project uses an rp2350 to emulate a ROM chip on an NES Cartridge.

    59 parts1
  • 2 layers27.9 × 15.2 mmFF2 20241213 1510, the printed circuit board in 3D

    FF2 20241213 1510

    25mmHg/AlteFabrik191126

    Flimmerfeen2.0

    12 partsBSD-3-Clause
  • 2 layers140 × 60 mmA277d led tachometer, the printed circuit board in 3D

    A277d led tachometer

    bazsimarkus/a277d-led-tachometer

    An analog LED tachometer controlled by an East German A277D chip (clone of UAA180), featuring an integrated ATtiny13A-based digital ignition pulse generator for testing.

    61 parts
  • 2 layersHeart, the printed circuit board in 3D

    Heart

    CesarOtoniel/charlieplexedHeart

    Charlieplexed LED sequencer with the shape of a heart. Intended to be mounted on wired LED sign and not on the PCB.

    20 partsApache-2.0
  • 2 layers37.8 × 33.7 mmTemperature kicad, the printed circuit board in 3D

    Temperature kicad

    Electroshare/temperature-sensor

    A temperature sensor that runs on a battery

    15 partsGPL-3.0
  • 2 layersJiggler, the printed circuit board in 3D

    Jiggler

    FltSv/Jiggler

    10 parts
  • 2 layers54 × 65 mmReaktor51 game, the printed circuit board in 3D

    Reaktor51 game

    ingepnet/reaktor51_pcb

    PCB projects for reaktor51.no

    17 parts
  • 2 layers38.2 × 11.9 mmLeviosa, the printed circuit board in 3D

    Leviosa

    Kay-Jack/Leviosa

    A Levitating Pen

    59 parts
  • 2 layers20.3 × 20.3 mmKropelka, the printed circuit board in 3D

    Kropelka

    majkrzak/kropelka

    Fluid level ISM band radio sensor.

    4 parts
  • 2 layers100 × 53.8 mmTasterPAD, the printed circuit board in 3D

    TasterPAD

    phreichel/BAG

    Container bag that contains all current and future projects.

    49 partsMIT
  • 2 layers25.9 × 27.8 mmOn off switch, the printed circuit board in 3D

    On off switch

    sailor-elite/on_off_switch_ASG

    ATtiny13a PCB off Switch design and program for AS&G System in Mistubishi ASX and Citroen C4 Aircross.

    18 parts
  • 10 layers91.4 × 40.6 mmDiy digital clock, the printed circuit board in 3D

    Diy digital clock

    sandorex/diy-digital-clock

    DIY LED segment clock using DS1302 and ATTiny13a, with shift registers

    20 partsGPL-3.0
  • 2 layers40 × 86.5 mmFlicker lamp, the printed circuit board in 3D

    Flicker lamp

    swarren/sca-making

    SCA making/manufacturing projects (those driven by modern witchcraft tools like electronics, LASER cutters, CNC, etc.)

    29 parts
  • 2 layersSmartvault, the printed circuit board in 3D

    Smartvault

    taegyunkim-kcp/smartvault

    스마트폰 보관함

    95 parts
  • 2 layersATTINY13A AlarmDevice, the printed circuit board in 3D

    ATTINY13A AlarmDevice

    TechnikWeber/ATTINY13A-fake-alarm-device

    A fake alarm light (blinking LED) with an ultra-low-power ATtiny13A running on a CR2032 coin cell.

    8 partsMIT
  • 2 layers20 × 29 mmChip luz, the printed circuit board in 3D

    Chip luz

    torbol/SinotimerATTINY13-chipset

    Se crea chip para pulsar una secuencia de botones establecida (autoconfigurar parámetro dispositivo sin memoria después de un corte total de luz)

    10 parts
  • 2 layersTestTarget, the printed circuit board in 3D

    TestTarget

    lzrtag/LZRTag

    AVR-Based easily modifyable DIY Lasertag!

    13 parts111GPL-3.0
  • 2 layers282.7 × 108.3 mmKeyboard, the printed circuit board in 3D

    Keyboard

    danwerner21/TI99_22

    a 2022 replica of the classic TI/994a, using obtainable parts

    63 parts50