2 layers30.5 × 20.3 mm
2 layers100 × 53.8 mm
TasterPAD
phreichel/BAGContainer bag that contains all current and future projects.
- Size
- 100 × 53.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 49
- Nets
- 27
- Pads
- 145
- Tracks, vias
- 247, 0
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 4 Nov 2024
- Updated
- 14 Sep 2026
Overview
TasterPAD is an open-source printed circuit board by phreichel, from the phreichel/BAG repository on GitHub, published under the MIT licence. It is a 2-layer board of 100 × 53.8 mm with 49 parts on 27 nets, routed with 247 tracks and 0 vias.
It is built around the ATTINY13A-PU and 74HC165D. Its parts include 19 resistors, 6 connectors, 3 capacitors and 3 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATTINY13A-PU
DIP-8-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 6 64Byte 64Byte 8 Bit AVR Built-in FLASH DIP-8 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
74HC165D
SO-16-40℃~+125℃ 1 28ns@6V,50pF 2V~6V 35MHz 500mW 74HC 8 Parallel or Serial to Serial SOIC-16 Shift Registers ROHSNexperiaShift Registers
Parts
49| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3, R4, R5, R6, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19 +3 |
| 13 | PinHeader_1x02_P2.54mm_Vertical | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | B1, B2, B3, B4, B5, B5, B6, SB1, SB2, SB3, SB4, SB5, SB6 |
| 4 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2, J4, J5, J6 |
| 4 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | MH1, MH2, MH3, MH4 |
| 3 | C | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2, C3 |
| 2 | 74HC165 | Package_DIP:DIP-16_W7.62mm_Socket_LongPads | U1, U2 |
| 1 | ATtiny13A-P | Package_DIP:DIP-8_W7.62mm_Socket_LongPads | U3 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | PinHeader_1x01_P2.54mm_Vertical | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | SB7 |
| 1 | SPI Programmer IF | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J3 |
More from phreichel/BAG
1Similar boards
- 10 layers91.4 × 40.6 mm
Diy digital clock
sandorex/diy-digital-clock
DIY LED segment clock using DS1302 and ATTiny13a, with shift registers
20 partsGPL-3.0 - 2 layers
- 2 layers99.7 × 63.9 mm
NES CN ROM-256-05
emeargt/nes-cnrom
KiCad project for NES-CN-ROM-256-05 cartridge schematic and PCB
17 parts31CC-BY-SA-4.0 - 2 layers100 × 61.4 mm
Cart
digilogistist/The-Open-Source-USB-NES-Project
USB-NES and NES-FASTGFX product engineering repository
38 parts24CC0-1.0 - 2 layers100 × 100 mm
- 2 layers22.9 × 30.7 mm
- 4 layers243.8 × 243.8 mm
- 6 layers100.1 × 112 mm
Picones
WiiMake/picones
In the last 40 years, technology has advanced to the point were what used to be done in hardware can now be done in software. This project uses an rp2350 to emulate a ROM chip on an NES Cartridge.
59 parts1
Questions
How big is the TasterPAD PCB?
It measures 100 × 53.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the TasterPAD use?
49 parts, built around the ATTINY13A-PU and 74HC165D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the TasterPAD KiCad files?
From the phreichel/BAG repository on GitHub, at the commit this page was made from: the board is CAD/TasterPAD/tasterPAD/tasterPAD.kicad_pcb and its schematic CAD/Electric/Electric.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the TasterPAD design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).