Skip to the content
12345678

ATTINY13A-PU

Microchip TechnologyExtended

-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 6 64Byte 64Byte 8 Bit AVR Built-in FLASH DIP-8 Microcontrollers (MCU/MPU/SOC) ROHS

Part id
microchip/ATTINY13A-PU
Category
Microcontrollers (MCU, MPU, SOC)
Package
DIP-8
Pins
8
In stock
150 at JLCPCB (C94341)
Used on
35 open-source boards

Overview

The ATTINY13A-PU is a microcontroller made by Microchip Technology in a DIP-8 package with 8 pins. -40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 6 64Byte 64Byte 8 Bit AVR Built-in FLASH DIP-8 Microcontrollers (MCU/MPU/SOC) ROHS.

PCBKit's library has its KiCad symbol (MCU_Microchip_ATtiny:ATtiny13A-P, from KiCad's library) and its footprint (Package_DIP:DIP-8_W7.62mm, from KiCad's library), ready for a KiCad board. 150 are in stock at JLCPCB (part C94341). 35 open-source boards in 32 repositories on GitHub use it.

Symbol

1RESET/PB52PB33PB44GND5PB06PB17PB28VCC
MCU_Microchip_ATtiny:ATtiny13A-PFrom KiCad's library

Footprint

12345678
Package_DIP:DIP-8_W7.62mmFrom KiCad's library

Pinout

8
The pins of the ATTINY13A-PU
PinNameType
1RESET/PB5Input/output
2PB3Input/output
3PB4Input/output
4GNDPower in
5PB0Input/output
6PB1Input/output
7PB2Input/output
8VCCPower in

Open-source boards using it

35See all 35
  • 2 layers99.7 × 63.9 mmNES CN ROM-256-05, the printed circuit board in 3D

    NES CN ROM-256-05

    emeargt/nes-cnrom

    KiCad project for NES-CN-ROM-256-05 cartridge schematic and PCB

    17 parts31CC-BY-SA-4.0
  • 2 layers100 × 61.4 mmCart, the printed circuit board in 3D

    Cart

    digilogistist/The-Open-Source-USB-NES-Project

    USB-NES and NES-FASTGFX product engineering repository

    38 parts24CC0-1.0
  • 2 layers100 × 100 mmMotherboard, the printed circuit board in 3D

    Motherboard

    Terminus-IMRC/RPiCluster2

    Yet another Raspberry Pi cluster, version 2

    334 parts9
  • 2 layers22.9 × 30.7 mmOnewire led, the printed circuit board in 3D

    Onewire led

    kcuzner/onewire-leds

    An RGB LED driver on a modified one-wire bus

    11 parts4MIT
  • 4 layers243.8 × 243.8 mmSbc 8088, the printed circuit board in 3D

    Sbc 8088

    miselin/M88

    The M88 Computer

    218 parts2CERN-OHL-P-2.0
  • 6 layers100.1 × 112 mmPicones, the printed circuit board in 3D

    Picones

    WiiMake/picones

    In the last 40 years, technology has advanced to the point were what used to be done in hardware can now be done in software. This project uses an rp2350 to emulate a ROM chip on an NES Cartridge.

    59 parts1
  • 2 layers27.9 × 15.2 mmFF2 20241213 1510, the printed circuit board in 3D

    FF2 20241213 1510

    25mmHg/AlteFabrik191126

    Flimmerfeen2.0

    12 partsBSD-3-Clause
  • 2 layers140 × 60 mmA277d led tachometer, the printed circuit board in 3D

    A277d led tachometer

    bazsimarkus/a277d-led-tachometer

    An analog LED tachometer controlled by an East German A277D chip (clone of UAA180), featuring an integrated ATtiny13A-based digital ignition pulse generator for testing.

    61 parts

Parts like it

7

Questions

Is there a KiCad symbol and footprint for the ATTINY13A-PU?

Yes. The symbol is MCU_Microchip_ATtiny:ATtiny13A-P and the footprint Package_DIP:DIP-8_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ATTINY13A-PU?

DIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the ATTINY13A-PU datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the ATTINY13A-PU?

JLCPCB lists it as part C94341, with 150 in stock; the sellers' links on this page open their listings.

What can replace the ATTINY13A-PU?

Parts like it in the library: the ATTINY85-20PU by Microchip Technology, the ATTINY45-20PU by Microchip Technology, the ATTINY13-20PU by Microchip Technology and the ATTINY25-20PU by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ATTINY13A-PU?

35 boards in 32 repositories on GitHub; the most starred are listed on this page, with their KiCad files.