Skip to the content
12345678

ATTINY25-20PU

Microchip TechnologyExtended

-40℃~+85℃ 10bit 128Byte 128Byte 2.7V~5.5V 20MHz 2KB 6 8 Bit AVR Built-in FLASH PDIP-8 Microcontrollers (MCU/MPU/SOC) ROHS

Part id
microchip/ATTINY25-20PU
Category
Microcontrollers (MCU, MPU, SOC)
Package
PDIP-8
Pins
8
In stock
0 at JLCPCB (C1527377)
Used on
8 open-source boards

Overview

The ATTINY25-20PU is a microcontroller made by Microchip Technology in a PDIP-8 package with 8 pins. -40℃~+85℃ 10bit 128Byte 128Byte 2.7V~5.5V 20MHz 2KB 6 8 Bit AVR Built-in FLASH PDIP-8 Microcontrollers (MCU/MPU/SOC) ROHS.

PCBKit's library has its KiCad symbol (MCU_Microchip_ATtiny:ATtiny25-20P, from KiCad's library) and its footprint (Package_DIP:DIP-8_W7.62mm, from KiCad's library), ready for a KiCad board. JLCPCB lists it (part C1527377). 8 open-source boards in 8 repositories on GitHub use it.

Symbol

1RESET/PB52XTAL1/PB33XTAL2/PB44GND5AREF/PB06PB17PB28VCC
MCU_Microchip_ATtiny:ATtiny25-20PFrom KiCad's library

Footprint

12345678
Package_DIP:DIP-8_W7.62mmFrom KiCad's library

Pinout

8
The pins of the ATTINY25-20PU
PinNameType
1RESET/PB5Input/output
2XTAL1/PB3Input/output
3XTAL2/PB4Input/output
4GNDPower in
5AREF/PB0Input/output
6PB1Input/output
7PB2Input/output
8VCCPower in

Open-source boards using it

8
  • 2 layers10.7 × 20.7 mmUltraCIC III, the printed circuit board in 3D

    UltraCIC III

    ManCloud/UltraCIC-III

    N64 CIC replacement

    4 parts54GPL-3.0
  • 4 layers243.8 × 204.5 mmA1 micro atx, the printed circuit board in 3D

    A1 micro atx

    andrastantos/anachron

    243 parts1MIT
  • 2 layers40 × 60 mmLichtschranke M tube, the printed circuit board in 3D

    Lichtschranke M tube

    REcassy/Lichtschrankenadapter-M

    Open sensor for use with any standard light barrier on a Mobile Cassy

    12 parts1GPL-3.0
  • 2 layers22.4 × 53.3 mmOpip2e fan, the printed circuit board in 3D

    Opip2e fan

    mjbogusz/opip2e_fan_pcb

    PWM fan controller board for OrangePi Plus 2E

    10 partsMIT
  • 2 layers97 × 60 mmSimon says, the printed circuit board in 3D

    Simon says

    pvar/pcb_simon_says

    24 partsGPL-3.0
  • 2 layers60 × 50 mmRelais M, the printed circuit board in 3D

    Relais M

    REcassy/Relais-M

    This repo contains the schematics (KiCad + symbols/footprints), pcb (gerber + drill) files necessary to build a clone Relais M adapter for the Cassy Mobile as described here…

    13 parts
  • 2 layers41.9 × 15.2 mmFake xenon4, the printed circuit board in 3D

    Fake xenon4

    tomaskovacik/hw

    HW (pcb, schematics etc) for my projects

    24 parts27
  • 2 layers60 × 39 mmMagnetometer, the printed circuit board in 3D

    Magnetometer

    mjmorano/Magnetometer-System

    36 parts1

Parts like it

7

Questions

Is there a KiCad symbol and footprint for the ATTINY25-20PU?

Yes. The symbol is MCU_Microchip_ATtiny:ATtiny25-20P and the footprint Package_DIP:DIP-8_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ATTINY25-20PU?

PDIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the ATTINY25-20PU datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the ATTINY25-20PU?

JLCPCB lists it as part C1527377, with 0 in stock; the sellers' links on this page open their listings.

What can replace the ATTINY25-20PU?

Parts like it in the library: the ATTINY85-20PU by Microchip Technology, the ATTINY13A-PU by Microchip Technology, the ATTINY45-20PU by Microchip Technology and the ATTINY13-20PU by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ATTINY25-20PU?

8 boards in 8 repositories on GitHub; the most starred are listed on this page, with their KiCad files.