Skip to the content
12345678

ATTINY13-20PU

Microchip TechnologyExtended

-40℃~+85℃ 10bit 1KB 2.7V~5.5V 20MHz 6 64Byte 64Byte 8 Bit AVR Built-in FLASH DIP-8 Microcontrollers (MCU/MPU/SOC) ROHS

Part id
microchip/ATTINY13-20PU
Category
Microcontrollers (MCU, MPU, SOC)
Package
DIP-8
Pins
8
In stock
19 at JLCPCB (C145757)
Used on
14 open-source boards

Overview

The ATTINY13-20PU is a microcontroller made by Microchip Technology in a DIP-8 package with 8 pins. -40℃~+85℃ 10bit 1KB 2.7V~5.5V 20MHz 6 64Byte 64Byte 8 Bit AVR Built-in FLASH DIP-8 Microcontrollers (MCU/MPU/SOC) ROHS.

PCBKit's library has its KiCad symbol (MCU_Microchip_ATtiny:ATtiny13-20P, from KiCad's library) and its footprint (Package_DIP:DIP-8_W7.62mm, from KiCad's library), ready for a KiCad board. 19 are in stock at JLCPCB (part C145757). 14 open-source boards in 12 repositories on GitHub use it.

Symbol

1RESET/PB52PB33PB44GND5PB06PB17PB28VCC
MCU_Microchip_ATtiny:ATtiny13-20PFrom KiCad's library

Footprint

12345678
Package_DIP:DIP-8_W7.62mmFrom KiCad's library

Pinout

8
The pins of the ATTINY13-20PU
PinNameType
1RESET/PB5Input/output
2PB3Input/output
3PB4Input/output
4GNDPower in
5PB0Input/output
6PB1Input/output
7PB2Input/output
8VCCPower in

Open-source boards using it

14See all 14
  • 2 layers32 × 48 mmDiyIrTower, the printed circuit board in 3D

    DiyIrTower

    maehw/DiyIrTower

    Do-it-yourself infrared serial communication tower (compatible with LEGO IR serial tower)

    17 parts12GPL-3.0
  • 2 layers45 × 29 mmIM100 Override, the printed circuit board in 3D

    IM100 Override

    pointcheck/IM100_Override

    Paslode IM100C vendor lock-in override

    20 parts7MIT
  • 4 layers112 × 72 mmDk spot welder, the printed circuit board in 3D

    Dk spot welder

    sini6a/spotwelder

    An easy-to-assemble, through-hole spot welder capable of switching high currents for welding nickel strip to lithium-ion cells. Controlled by an ATtiny13 microcontroller.

    51 parts3
  • 2 layers117.5 × 28.3 mmTrasser, the printed circuit board in 3D

    Trasser

    dmitry131131/Trasser

    Трассерная насадка для игры в страйкбол. Подсвечивает специальные трассирующие шары при вылете из ствола при помощи УФ подсветки, а также иммитирует вспышку выстрела.

    30 parts1
  • 2 layers100 × 100 mmAS NES Mapper474-SM1, the printed circuit board in 3D

    AS NES Mapper474-SM1

    Akerasoft/AS-NROM-368

    Mapper 474 - Submapper 1 - NROM-368

    17 parts
  • 2 layersMoodeAudio, the printed circuit board in 3D

    MoodeAudio

    DmaEvilCorp/MoodeAudioBuild

    Case Hammond 1455T2202BK (220x165x51.5mm) black aluminium. Front and back are in plastic, much easier for working. I've used FrontPanel from Schaeffer to make the design.

    13 partsGPL-3.0
  • 6 layers73 × 50 mmSoft starter, the printed circuit board in 3D

    Soft starter

    Susensio/soft-starter

    Arduino project for soft start led strips, imitating incandescent bulbs

    24 parts

Parts like it

7

Questions

Is there a KiCad symbol and footprint for the ATTINY13-20PU?

Yes. The symbol is MCU_Microchip_ATtiny:ATtiny13-20P and the footprint Package_DIP:DIP-8_W7.62mm, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the ATTINY13-20PU?

DIP-8, with 8 pins. Its footprint is drawn on this page.

Where is the ATTINY13-20PU datasheet?

Microchip Technology publishes it: the Datasheet link on this page opens it.

Where can I order the ATTINY13-20PU?

JLCPCB lists it as part C145757, with 19 in stock; the sellers' links on this page open their listings.

What can replace the ATTINY13-20PU?

Parts like it in the library: the ATTINY85-20PU by Microchip Technology, the ATTINY13A-PU by Microchip Technology, the ATTINY45-20PU by Microchip Technology and the ATTINY25-20PU by Microchip Technology. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the ATTINY13-20PU?

14 boards in 12 repositories on GitHub; the most starred are listed on this page, with their KiCad files.