Skip to the content
2 layersHeart, the printed circuit board in 3D

Charlieplexed LED sequencer with the shape of a heart. Intended to be mounted on wired LED sign and not on the PCB.

Copper layers
2
Thickness
1.6 mm
Parts
20
Nets
13
Pads
32
Tracks, vias
42, 0
Pours
5
Routed
Yes
KiCad
KiCad 7.99 (file 20231212)
Created
27 Feb 2024
Updated
6 Mar 2024

Overview

Heart is an open-source printed circuit board by CesarOtoniel, from the CesarOtoniel/charlieplexedHeart repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board with 20 parts on 13 nets, routed with 42 tracks and 0 vias.

It is built around the ATTINY13A-PU. Its parts include 5 resistors and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

1

README

README.md

charlieplexedHeart

Charlieplexed LED sequencer with the shape of a heart


Board:

heart


Proposed layout: heartLED


The finished project: ![IMAGE ALT TEXT HERE]

Parts

20
QtyValueFootprintReferences
13TestPointConnector_Pin:Pin_D1.0mm_L10.0mm_LooseFitTP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP16, TP23, TP30, TP37
5RResistor_THT:R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_HorizontalR1, R2, R3, R4, R5
1
1ATtiny13A-PPackage_DIP:DIP-8_W7.62mmU1

Similar boards

  • 2 layers99.7 × 63.9 mmNES CN ROM-256-05, the printed circuit board in 3D

    NES CN ROM-256-05

    emeargt/nes-cnrom

    KiCad project for NES-CN-ROM-256-05 cartridge schematic and PCB

    17 parts31CC-BY-SA-4.0
  • 2 layers100 × 61.4 mmCart, the printed circuit board in 3D

    Cart

    digilogistist/The-Open-Source-USB-NES-Project

    USB-NES and NES-FASTGFX product engineering repository

    38 parts24CC0-1.0
  • 2 layers100 × 100 mmMotherboard, the printed circuit board in 3D

    Motherboard

    Terminus-IMRC/RPiCluster2

    Yet another Raspberry Pi cluster, version 2

    334 parts9
  • 2 layers22.9 × 30.7 mmOnewire led, the printed circuit board in 3D

    Onewire led

    kcuzner/onewire-leds

    An RGB LED driver on a modified one-wire bus

    11 parts4MIT
  • 4 layers243.8 × 243.8 mmSbc 8088, the printed circuit board in 3D

    Sbc 8088

    miselin/M88

    The M88 Computer

    218 parts2CERN-OHL-P-2.0
  • 6 layers100.1 × 112 mmPicones, the printed circuit board in 3D

    Picones

    WiiMake/picones

    In the last 40 years, technology has advanced to the point were what used to be done in hardware can now be done in software. This project uses an rp2350 to emulate a ROM chip on an NES Cartridge.

    59 parts1
  • 2 layers27.9 × 15.2 mmFF2 20241213 1510, the printed circuit board in 3D

    FF2 20241213 1510

    25mmHg/AlteFabrik191126

    Flimmerfeen2.0

    12 partsBSD-3-Clause
  • 2 layers140 × 60 mmA277d led tachometer, the printed circuit board in 3D

    A277d led tachometer

    bazsimarkus/a277d-led-tachometer

    An analog LED tachometer controlled by an East German A277D chip (clone of UAA180), featuring an integrated ATtiny13A-based digital ignition pulse generator for testing.

    61 parts

Questions

What parts does the Heart use?

20 parts, built around the ATTINY13A-PU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Heart KiCad files?

From the CesarOtoniel/charlieplexedHeart repository on GitHub, at the commit this page was made from: the board is heart.kicad_pcb and its schematic heart.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Heart design in my own project?

Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).