Skip to the content

Boards using the ATMEGA8A-AU

34 boards

Boards in 29 GitHub repositories, designed in KiCad, that use the ATMEGA8A-AU by Microchip Technology (-40℃~+85℃ 10bit 16MHz 1KB 2.7V~5.5V 23 512Byte 8 Bit 8KB AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHS). See how each wires it, with its parts, size, README and files; the ATMEGA8A-AU’s symbol, footprint and pinout are on its own page.

  • 2 layersMP Tracker, the printed circuit board in 3D

    MP Tracker

    elektra42/freifunk-open-mppt

    Open hard- and software solar maximum power point tracker

    70 parts89
  • 2 layers99.1 × 40 mmZX BUS Mouse, the printed circuit board in 3D

    ZX BUS Mouse

    proboterror/ZX_BUS_Mouse

    ZX BUS Kempston Mouse Controller

    31 parts18
  • 2 layers96.3 × 98 mmAquarium, the printed circuit board in 3D

    Aquarium

    baranovskiykonstantin/aquarium

    Control the lighting and the heating of the aquarium.

    73 parts11
  • 2 layers58.4 × 47 mmAVRUSBLPT, the printed circuit board in 3D

    AVRUSBLPT

    a-sakharov/LptToUsbAdapter

    Solution for connecting old LPT device to modern PC via USB

    17 parts6MIT
  • 2 layers87 × 62 mmKeypad, the printed circuit board in 3D

    Keypad

    q3k/hacklock

    An open source RFID lock for hackerspaces and more!

    23 parts5
  • 2 layers23.6 × 20 mmXenoGCFlex, the printed circuit board in 3D

    XenoGCFlex

    HDR/XenoGC-Flex

    Flashing is done over isp, a raspberry pi can be used for this, see https://github.com/HDR/RaspberryPiISP

    21 parts4
  • 2 layers302 × 135 mmModulo, the printed circuit board in 3D

    Modulo

    nodep/myAmp

    Battery powered, solid state, guitar amplifier schematic and PCB

    201 parts4GPL-3.0
  • 2 layers32 × 43.7 mmNoahESC, the printed circuit board in 3D

    NoahESC

    zosko/NoahESC

    NoahESC - Atmega8 based ESC

    50 parts3
  • 2 layers47 × 47 mmHid digout, the printed circuit board in 3D

    Hid digout

    COKPOWEHEU/MeasBot

    Automatization system for measures by scientific devices

    25 parts1
  • 2 layers99.8 × 99.8 mmVikings Robotics PCB, the printed circuit board in 3D

    Vikings Robotics PCB

    MrBruh/Vikings-Robotics-PCB

    A board with 2 ATMEGA microprocessors for controlling up to 7 DC motors and 4 servos

    261 parts1
  • 2 layersClock 7 4x1, the printed circuit board in 3D

    Clock 7 4x1

    serhiyk/avr_projects

    Arduino + DS3231 + 12 x MAX7219

    57 parts1
  • 4 layers50 × 29 mmNeptuneESC, the printed circuit board in 3D

    NeptuneESC

    15jgme/NeptuneESC

    The goal of this project is to create the smallest possible SMD ESC module. Work is largely based of schematics provided by Blue Robotics in their BlueESC.

    73 partsLGPL-3.0
  • 4 layers96.9 × 99.9 mmMaisonEtape1, the printed circuit board in 3D

    MaisonEtape1

    Antoine-GG/Maison_JP_DJ

    124 parts
  • 2 layers100 × 100 mmArcade, the printed circuit board in 3D

    Arcade

    daid/ArcadeElectronics

    V-USB based Electronics board for Arcade controls

    176 partsGPL-2.0
  • 2 layers68.3 × 90 mmModuleController old, the printed circuit board in 3D

    ModuleController old

    dennis9819/split-flap-controller

    Sourcecode and Schematics for the controller of my split-flap display

    25 partsAGPL-3.0
  • 2 layers69.8 × 50 mmAlarmClock, the printed circuit board in 3D

    AlarmClock

    GHOST-mHBr/PCBs

    My open source PCBs

    40 parts
  • 4 layers53.5 × 53 mmHwexla, the printed circuit board in 3D

    Hwexla

    kmzbrnoI/hWexla

    Turnout controller

    93 parts
  • 2 layers28.9 × 35.4 mmUsbasploader, the printed circuit board in 3D

    Usbasploader

    mekatronik-achmadi/atmega-dev

    This repository store some examples of ATMega development. Currently reworked

    22 parts
  • 2 layers115.1 × 61 mmRilis1, the printed circuit board in 3D

    Rilis1

    mekatronik-achmadi/openpv

    68 parts
  • 2 layers49 × 43 mmIncubator, the printed circuit board in 3D

    Incubator

    Sanjay-083/PCB_design

    17 parts
  • 2 layersTachmetr V2, the printed circuit board in 3D

    Tachmetr V2

    Wladymyr1996/TachMetr-V2.0

    The is a LED tachometer for my trike. Work on Atmega8A_AU and MAX7219.

    63 parts
  • 2 layers101.6 × 99.7 mmKarabas nano karabas nano revB, the printed circuit board in 3D

    Karabas nano karabas nano revB

    PCBench/PCBench

    resolution = [0.5, 0.5] pcbfolder = '../PCBs/' pcbnames = ["1Bitsy1bitsy"] iters = 30 env = PCBRoutingEnv(resolution=resolution, pcbfolder=pcbfolder, pcbnames=pcbnames) obs, info = env.reset() for in range(iters): act =…

    147 parts21MIT
  • 2 layers101.6 × 99.7 mmRaw, the printed circuit board in 3D

    Raw

    PCBench/PCBench

    resolution = [0.5, 0.5] pcbfolder = '../PCBs/' pcbnames = ["1Bitsy1bitsy"] iters = 30 env = PCBRoutingEnv(resolution=resolution, pcbfolder=pcbfolder, pcbnames=pcbnames) obs, info = env.reset() for in range(iters): act =…

    158 parts21MIT
  • 2 layers36.8 × 44.5 mmPontag, the printed circuit board in 3D

    Pontag

    hkzlab/pontag

    PONTAG is an active adapter that converts a mouse using PS/2 protocol into an RS232 mouse (Microsoft protocol), commonly used on IBM XT/AT and compatibles.

    32 parts9