2 layers
MP Tracker
elektra42/freifunk-open-mppt
Open hard- and software solar maximum power point tracker
70 parts89
2 layers47 × 47 mm
Hid digout
COKPOWEHEU/MeasBot1Automatization system for measures by scientific devices
- Size
- 47 × 47 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 25
- Nets
- 34
- Pads
- 107
- Tracks, vias
- 309, 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 19 Feb 2020
- Updated
- 27 Jun 2024
Overview
Hid digout is an open-source printed circuit board by COKPOWEHEU, from the COKPOWEHEU/MeasBot repository on GitHub. It is a 2-layer board of 47 × 47 mm with 25 parts on 34 nets, routed with 309 tracks and 1 via.
It is built around the ATMEGA8A-AU. Its parts include 7 resistors, 6 capacitors, 6 connectors, 4 diodes and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdMeasBot
Automatization system for measures by scientific devices
Инструкция по тестированию: === Linux === Запускаете ./prog64 [script] Если script не указан, будет использован дефолтный data/script.lua
=== Windows === Копируете core\res\prog32.exe в mingw_dll\res32.exe с заменой Копируете в каталог modules\lib\lib\dyn (возможно, понадобится заменить файл dyn каталогом с тем же именем) следующие файлы с заменой имени: modules\e24\res\prog32.dll -> e24.dll modules\mygui_gtk\res\prog32.dll -> mygui_gtk.dll modules\tty\res\prog32.dll -> tty.dll После чего запускаете mingw_dll\prog32.exe [script] Если script не указан, будет использован дефолтный data\script.lua
Данный геморрой связан с тем, что программа находится в начальной стадии разработки и особого внимания эргономике не уделялось.
Parts
25| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | R | Resistor_SMD:R_0805_2012Metric | R1, R2, R3, R4, R5, R6, R7 |
| 3 | Conn_02x04_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Horizontal | J1, J3, J6 |
| 2 | C | Capacitor_THT:C_Disc_D3.4mm_W2.1mm_P2.50mm | C1, C2 |
| 2 | C | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C4, C5 |
| 2 | D_Zener | Diode_THT:D_5W_P10.16mm_Horizontal | D3, D4 |
| 2 | LED | LED_THT:LED_D5.0mm_Horizontal_O3.81mm_Z9.0mm | D1, D2 |
| 1 | ATmega8A-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | C | Capacitor_SMD:C_1206_3216Metric | C6 |
| 1 | C_Polarized | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C3 |
| 1 | Crystal | Crystal:Crystal_HC49-U_Vertical | Y1 |
| 1 | RST | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J2 |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Horizontal | J4 |
| 1 | USB_B_Mini | userlib_kicad:USB-mini | J5 |
Similar boards
- 2 layers99.1 × 40 mm
- 2 layers96.3 × 98 mm
Aquarium
baranovskiykonstantin/aquarium
Control the lighting and the heating of the aquarium.
73 parts11 - 2 layers58.4 × 47 mm
AVRUSBLPT
a-sakharov/LptToUsbAdapter
Solution for connecting old LPT device to modern PC via USB
17 parts6MIT - 2 layers87 × 62 mm
- 2 layers23.6 × 20 mm
XenoGCFlex
HDR/XenoGC-Flex
Flashing is done over isp, a raspberry pi can be used for this, see https://github.com/HDR/RaspberryPiISP
21 parts4 - 2 layers302 × 135 mm
- 2 layers32 × 43.7 mm
Questions
How big is the Hid digout PCB?
It measures 47 × 47 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Hid digout use?
25 parts, built around the ATMEGA8A-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hid digout KiCad files?
From the COKPOWEHEU/MeasBot repository on GitHub, at the commit this page was made from: the board is modules/hid_digout/hardware/hid_digout.kicad_pcb and its schematic modules/hid_digout/hardware/hid_digout.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hid digout design in my own project?
Its repository states no licence, so its author keeps all rights: ask COKPOWEHEU before reusing the design.