2 layers17 × 20 mm
XenoGCFlex NoISP
HDR/XenoGC-Flex
Flashing is done over isp, a raspberry pi can be used for this, see https://github.com/HDR/RaspberryPiISP
14 parts4
2 layers23.6 × 20 mm
XenoGCFlex
HDR/XenoGC-Flex4Flashing is done over isp, a raspberry pi can be used for this, see https://github.com/HDR/RaspberryPiISP
- Size
- 23.6 × 20 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 36
- Pads
- 70
- Tracks, vias
- 135, 11
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 Jun 2020
- Updated
- 20 Aug 2020
Overview
XenoGCFlex is an open-source printed circuit board by HDR, from the HDR/XenoGC-Flex repository on GitHub. It is a 2-layer board of 23.6 × 20 mm with 21 parts on 36 nets, routed with 135 tracks and 11 vias.
It is built around the ATMEGA8A-AU. Its parts include 3 resistors, 2 capacitors, 2 diodes, 1 IC and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdA XenoGC clone that is easier to flash and install (Current revision is untested)
Ordering
Make sure you select Flex on checkout
Flashing
Flashing is done over isp, a raspberry pi can be used for this, see https://github.com/HDR/RaspberryPi_ISP
sudo avrdude -p m8 -C ~/avrdude_gpio.conf -c pi_1 -U lfuse:w:0xe4:m -U hfuse:w:0xd9:m
sudo avrdude -p m8 -C ~/avrdude_gpio.conf -c pi_1 -U flash:w:XenoGC-Firmware.hexBOM
| Reference | Part Number | Description |
|---|---|---|
| R1 | 330Ω 0603 Resistor | LED Resistor |
| R2 | 330Ω 0603 Resistor | LED Resistor |
| R3 | 1KΩ 0603 Resistor | Reset Resistor |
| C1 | 100nF 0603 Capacitor | |
| C2 | 100nF 0603 CapacitorV | |
| U1 | Atmega8A-AU |
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | Jumper | Jumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6 |
| 2 | 100nF | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | 330 | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 1 | 1K | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | ATmega8A-AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | AVR-ISP-6 | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | J1 |
| 1 | GND | Custom:TestPoint_Plated_Hole_D1.6mm | GC6 |
| 1 | GRN | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | MISO | Custom:TestPoint_Plated_Hole_D1.6mm | GC9 |
| 1 | MOSI | Custom:TestPoint_Plated_Hole_D1.6mm | GC8 |
| 1 | PB1 | Custom:TestPoint_Plated_Hole_D1.6mm | GC5 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D2 |
| 1 | SCK | Custom:TestPoint_Plated_Hole_D1.6mm | GC7 |
| 1 | VCC | Custom:TestPoint_Plated_Hole_D1.6mm | GC1 |
More from HDR/XenoGC-Flex
1Similar boards
- 2 layers
MP Tracker
elektra42/freifunk-open-mppt
Open hard- and software solar maximum power point tracker
70 parts89 - 2 layers99.1 × 40 mm
- 2 layers96.3 × 98 mm
Aquarium
baranovskiykonstantin/aquarium
Control the lighting and the heating of the aquarium.
73 parts11 - 2 layers58.4 × 47 mm
AVRUSBLPT
a-sakharov/LptToUsbAdapter
Solution for connecting old LPT device to modern PC via USB
17 parts6MIT - 2 layers87 × 62 mm
- 2 layers302 × 135 mm
- 2 layers32 × 43.7 mm
- 2 layers47 × 47 mm
Questions
How big is the XenoGCFlex PCB?
It measures 23.6 × 20 mm and has 2 copper layers, 1.6 mm thick.
What parts does the XenoGCFlex use?
21 parts, built around the ATMEGA8A-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the XenoGCFlex KiCad files?
From the HDR/XenoGC-Flex repository on GitHub, at the commit this page was made from: the board is XenoGCFlex.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the XenoGCFlex design in my own project?
Its repository states no licence, so its author keeps all rights: ask HDR before reusing the design.