
MP Tracker
elektra42/freifunk-open-mppt
Open hard- and software solar maximum power point tracker

Solution for connecting old LPT device to modern PC via USB
AVRUSBLPT is an open-source printed circuit board by a-sakharov, from the a-sakharov/LptToUsbAdapter repository on GitHub, published under the MIT licence. It is a 2-layer board of 58.4 × 47 mm with 17 parts on 32 nets.
It is built around the ATMEGA8A-AU. Its parts include 4 capacitors, 4 resistors, 3 connectors, 2 diodes and 1 IC. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Solution for connecting old LPT device to modern PC via USB
Directory info:
Detailed desctiption: https://habr.com/ru/articles/727468/
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 18pF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 3.6 | Diode_SMD:D_MiniMELF | D1, D2 |
| 2 | 68 | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | ~ | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2 |
| 1 | 1.5k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 100nF | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 16MHz | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | 4.7k | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 4.7uF | Capacitor_SMD:CP_Elec_4x5.4 | C3 |
| 1 | ATmega8A-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U2 |
| 1 | DB25_Receptacle | Connector_Dsub:DSUB-25_Female_EdgeMount_P2.77mm | J1 |
| 1 | IDC10 | Connector_IDC:IDC-Header_2x05_P2.54mm_Vertical | J3 |
| 1 | USB_B | Connector_USB:USB_B_OST_USB-B1HSxx_Horizontal | J2 |

elektra42/freifunk-open-mppt
Open hard- and software solar maximum power point tracker


baranovskiykonstantin/aquarium
Control the lighting and the heating of the aquarium.


HDR/XenoGC-Flex
Flashing is done over isp, a raspberry pi can be used for this, see https://github.com/HDR/RaspberryPiISP



It measures 58.4 × 47 mm and has 2 copper layers, 1.6 mm thick.
17 parts, built around the ATMEGA8A-AU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the a-sakharov/LptToUsbAdapter repository on GitHub, at the commit this page was made from: the board is Schematics/AVRUSBLPT/AVRUSBLPT.kicad_pcb and its schematic Schematics/AVRUSBLPT/AVRUSBLPT.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).