

Hwexla
Turnout controller
- Size
- 53.5 × 53 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 93
- Nets
- 86
- Pads
- 306
- Tracks, vias
- 619, 192
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 7 Dec 2021
- Updated
- 16 Oct 2026
Overview
Hwexla is an open-source printed circuit board by kmzbrnoI, from the kmzbrnoI/hWexla repository on GitHub. It is a 4-layer board of 53.5 × 53 mm with 93 parts on 86 nets, routed with 619 tracks and 192 vias.
It is built around the ATMEGA8A-AU, BAT54C and SMF05, with the BZX84C18, BZX84C30 and BZX84C5V1 among its other parts. Its parts include 19 resistors, 16 diodes, 15 capacitors, 12 fuses and 8 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
8ATMEGA8A-AU
TQFP-32(7x7)-40℃~+85℃ 10bit 16MHz 1KB 2.7V~5.5V 23 512Byte 8 Bit 8KB AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)BAT54C
SOT-231 Pair Common Cathode 200mA 2uA@25V 30V 600mA 800mV@100mA SOT-23 Schottky Diodes ROHSNexperiaSchottky DiodesSMF05
SOT-353-55℃~+125℃ 100W 12V 200nA 5V 60pF 8.5V 8A Four channels IEC 61000-4-2、IEC 61000-4-5 TVS Unidirectional SOT-353 ESD and Surge Protection (TVS/ESD) ROHSWPMtekESD And Surge Protection (TVS/ESD)BZX84C18
SOT-23Zener DiodeshongjiachengBZX84C30
SOT-23-55℃~+150℃ 1 Independent 100nA 28V~32V 300mW 300Ω 30V 80Ω SOT-23 Zener Diodes ROHShongjiachengZener DiodesBZX84C5V1
SOT-23-40℃~+125℃ 1 Independent 2uA@2V 300mW 4.8V~5.4V 480Ω 5.1V 60Ω SOT-23 Zener Diodes ROHSHXY MOSFETZener DiodesRS-5
Through hole- Lack of specifications ROHSVishay IntertechnologyUncategorisedSS34
SMA(DO-214AC)-55℃~+125℃ 3A 40V 500uA@40V 550mV@3A Independent SMA(DO-214AC) Schottky Diodes ROHSMDDSchottky Diodes
README
wexlacon/README.mdWEXLACON
WEXLACON is a PCB permanently mounted to the railway layout to which hWexla connects.
Schematic and the PCB was designed in KiCad 9.
Authors
hWexla was designed in Model Railroaders Club Brno by Jan Horáček.
License
Content of this directory is provided under Creative Commons Attribution-ShareAlike 4.0 License as openhardware project. You may download any data, contribute to the project, manufacture PCB yourself or even sell it yourself.
Parts
93| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C5, C8, C9, C10, C11, C12, C13, C15 |
| 9 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R6, R7, R9, R11, R12, R15, R16 |
| 5 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R4, R5, R14, R17 |
| 5 | 200mA/460mA | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1, F7, F8, F9, F10 |
| 5 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3, Q4, Q5, Q6 |
| 4 | 2k2 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R10, R13, R20, R21 |
| 4 | BAT54C | Package_TO_SOT_SMD:SOT-23 | D14, D15, D16, D17 |
| 3 | 50mA/150mA | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F4, F5, F6 |
| 3 | BT148 | Package_TO_SOT_SMD:SOT-223 | Q1, Q7, Q8 |
| 2 | 10k | Resistor_SMD:R_Array_Concave_4x0603 | RN1, RN3 |
| 2 | 1N5819 | Diode_SMD:D_SOD-123 | D7, D9 |
| 2 | 2A | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F11, F12 |
| 2 | JLCPCB | MountingHole:ToolingHole_1.152mm | H3, H4 |
| 2 | SMF05 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | D4, D5 |
| 2 | ~ | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1, JP2 |
| 1 | 0.5A/1A | Fuse:Fuse_2920_7451Metric | F2 |
| 1 | 100p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | 1N4148 | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D13 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 22u | Capacitor_SMD:C_0805_2012Metric | C14 |
| 1 | 22u/25V | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 2k2 | Resistor_SMD:R_Array_Concave_4x0603 | RN2 |
| 1 | 470R | Resistor_SMD:R_Array_Concave_4x0603 | RN4 |
| 1 | 47k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
| 1 | 47u | Capacitor_SMD:C_0805_2012Metric | C7 |
| 1 | 500mA | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F3 |
| 1 | ATmega8A-AU | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | AVR-ISP-6 | Connector_PinSocket_2.54mm:PinSocket_2x03_P2.54mm_Vertical | J3 |
| 1 | BZX84C18 | Package_TO_SOT_SMD:SOT-23 | D11 |
| 1 | BZX84C30 | Package_TO_SOT_SMD:SOT-23 | D19 |
| 1 | BZX84C5V1 | Package_TO_SOT_SMD:SOT-23 | D18 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | Conn_01x06 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J4 |
| 1 | DB25_Male | Connector_Dsub:DSUB-25_Male_EdgeMount_P2.77mm | J1 |
| 1 | GR | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | KA78M05_TO252 | Package_TO_SOT_SMD:TO-252-2 | U3 |
| 1 | RED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D3 |
| 1 | RR112-1 | Package_TO_SOT_SMD:SOT-23W | U2 |
| 1 | RS-5 | hwexla:HFD2 | K1 |
| 1 | SS34 | Diode_SMD:D_SMA_Handsoldering | D10 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_Omron_B3FS-100xP | SW1 |
| 1 | ServoMount1 | MountingHole:MountingHole_2.2mm_M2_Pad | H1 |
| 1 | ServoMount2 | MountingHole:MountingHole_2.2mm_M2_Pad | H2 |
| 1 | TestPoint | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | TP2 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
| 1 | YEL | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D2 |
The 92 most common of 93 parts.
More from kmzbrnoI/hWexla
2- 2 layers17.2 × 30 mm

- 2 layers42 × 50 mm

Similar boards
- 2 layers155 × 58 mm

- 4 layers100 × 70 mm

- 2 layers120 × 50 mm

- 2 layers99.1 × 69.9 mm

Atoomnetmarc IoT12 IoT12 Control Board
punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark
73 parts1 - 4 layers60 × 30 mm

DALI USB
SvenHaedrich/kicad_dali_usb_lpc
KiCad Project for DALI to USB interface based on NXP LPC 1114 µController.
47 parts3MIT - 4 layers80 × 105.5 mm

- 4 layers76 × 58 mm

GR106768 Buzzer
4ms/openventilator
OpenVentilator project, this repo is just tests and noodlings
273 parts2 - 2 layers87 × 71 mm

Questions
How big is the Hwexla PCB?
It measures 53.5 × 53 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Hwexla use?
93 parts, built around the ATMEGA8A-AU, BAT54C, SMF05 and BZX84C18. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Hwexla KiCad files?
From the kmzbrnoI/hWexla repository on GitHub, at the commit this page was made from: the board is pcb/hwexla.kicad_pcb and its schematic diagpcb/hwexladiag.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Hwexla design in my own project?
Its repository states no licence, so its author keeps all rights: ask kmzbrnoI before reusing the design.