4 layers101.6 × 53.3 mm
H730duino
martinribelotta/h730duino
STM32H7 Arduino form factor and software compatible board
111 parts47MIT
Boards using the SP0502BAHTG
48 boardsBoards in 43 GitHub repositories, designed in KiCad, that use the SP0502BAHTG by Littelfuse (-40℃~+125℃ 100nA 2 30pF 5.5V 8.5V IEC 61000-4-2 TVS Unidirectional SOT-23 ESD and Surge Protection (TVS/ESD) ROHS). See how each wires it, with its parts, size, README and files; the SP0502BAHTG’s symbol, footprint and pinout are on its own page.
- 2 layers100 × 80 mm
- 2 layers
- 4 layers100 × 100 mm
MWGEN G1
MR-DOS/MWGEN-G1
12.5 MHz - 6400 MHz (LMX2572) or even up to 20 GHz (LMX2595) generator board with int./ext. reference.
373 parts18GPL-3.0 - 2 layers88 × 17.1 mm
Core v1
windnerd-labs/Windnerd-Core
WindNerd Core Wind Sensor Board - Hardware, software and documentation
28 parts10 - 2 layers107.5 × 60 mm
- 4 layers96.4 × 66.4 mm
Button box
robin7331/eufy-remote-control
This repository contains both the software and hardware files for the Eufy Make Remote Control Button Box project.
30 parts7 - 2 layers65 × 56 mm
- 4 layers101.5 × 83.4 mm
Thermostat
jrtaylor71/Smart-Thermostat-Alt-Firmware
A comprehensive, feature-rich smart thermostat firmware for ESP32-S3 microcontrollers with touch display, web interface, and Home Assistant integration.
91 parts2 - 4 layers55 × 154.1 mm
GPS module
Dizzerin/Rocket-Flight-Data-Computer
This project uses an STM32H743VGT6 MCU along with some innertial measurement units (IMU)s and barometric pressure sensors to and an SD card to record flight data from a model rocket and for later analysis, graphing, and…
161 parts1 - 4 layers51.4 × 61 mm
- 4 layers77 × 129 mm
Plutopack
kpezeshki/portaPLUTO
A handheld microwave analyzer based on the ADALM-PLUTO platform
145 parts1 - 4 layers101.6 × 53.3 mm
- 4 layers64.5 × 73.6 mm
- 2 layers40 × 50 mm
Sensor Station
BeeEyeIoT/sensor-station-board
Complete KiCAD project for a sensor data collection station
39 parts - 4 layers82.4 × 100 mm
- 2 layers28.5 × 12 mm
Vcnt2030-breakout
c-m-w/deal-cards-public
A robot that deals playing cards to multiple players around a table. A single central motor rotates the whole mechanism to aim at each player in turn, a brushless motor launches the card, and a closed-loop sensor…
15 parts - 4 layers100 × 100 mm
Data logger
Conor-Dunlop/FYP_datalogger
render of the datalogger with power board (yes i know it need routed)
176 parts - 2 layers45 × 45 mm
Watch
DINDIN2007/Blystwatch
This is a demo board to showcase development with both the BlystL15 (based on the nrf54L15) and the IOComposer AI from I-Syst.inc.
47 parts - 4 layers75 × 38.6 mm
HuffAndPuff
dmanla/AccessibilityHeadsetDevkit
A development kit for the creation of an accessibility driven platform.
149 parts - 2 layers54 × 54 mm
Steppers
eddyem/mmpp
MMPP (Multimode photometer-polarimeter) for the telescope Zeiss-1000 of SAO RAS.
55 partsGPL-3.0 - 4 layers94.5 × 80.5 mm
ReboostV2.1 fixed
fl4p/dcdc-parasitics
KiCad → FastHenry extractor for half-bridge power-stage parasitics (commutation-loop L, common-source inductance, gate-loop L/R) → SPICE subckt + SVG schematic
184 parts - 4 layers45 × 75 mm
- 4 layers89.7 × 82.9 mm
ICE40UP5K logic analyzer rev2
hack-a-tack/FPGA_Logic_Analyzer
(Info applies to rev. 1, update for later revisions (only final rev. matters in the README)) FPGA-based 8-channel logic analyzer implemented on iCE40UP5K.
170 parts