

Tafiti Ground Comms
All the different subsystems
- Size
- 64.5 × 73.6 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 69
- Nets
- 129
- Pads
- 338
- Tracks, vias
- 690, 108
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 2 Apr 2022
- Updated
- 20 Apr 2024
Overview
Tafiti Ground Comms is an open-source printed circuit board by tafiti-org, from the tafiti-org/Subsytems repository on GitHub, published under the MIT licence. It is a 4-layer board of 64.5 × 73.6 mm with 69 parts on 129 nets, routed with 690 tracks and 108 vias.
It is built around the STM32H743VIT6, AMS1117-3.3 and SP0502BAHTG, with the SP0503BAHTG and SP0504BAHTG among its other parts. Its parts include 27 capacitors, 14 resistors, 8 diodes, 5 ICs and 4 connectors. It belongs with the STM32 boards of this library.
Main components
5STM32H743VIT6
LQFP-100(14x14)-40℃~+85℃ 1.71V~3.6V 12bit 16bit 1MB 2MB 32 Bit 480MHz 82 ARM Cortex-M7 Built-in FLASH LQFP-100(14x14) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)AMS1117-3.3
SOT-223-40℃~+125℃ 0.003%Vout 1 1.1V@(800mA) 15V 1A 3.3V 5mA 72dB@(120Hz) Fixed Over Current Protection、Short Circuit Protection、Thermal shutdown Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSAdvanced Monolithic SystemsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsSP0502BAHTG
SOT-23-40℃~+125℃ 100nA 2 30pF 5.5V 8.5V IEC 61000-4-2 TVS Unidirectional SOT-23 ESD and Surge Protection (TVS/ESD) ROHSLittelfuseESD And Surge Protection (TVS/ESD)SP0503BAHTG
SOT-143-55℃~+125℃ 10A@8/20us 14V 150W@8/20us 30pF、60pF 5.5V 6V 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)SP0504BAHTG
SOT-23-5-55℃~+125℃ 100pF 10A@8/20us 11V、15V 150W@8/20us 5V 8.4V 80nA IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 SOT-23-5 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
Parts
69| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100n | Capacitor_SMD:C_0402_1005Metric | C5, C9, C10, C11, C12, C13, C17 |
| 6 | 47k | Resistor_SMD:R_0402_1005Metric | R4, R5, R6, R7, R8, R9 |
| 4 | 1k | Resistor_SMD:R_0402_1005Metric | R1, R10, R13, R14 |
| 4 | LED | LED_SMD:LED_0603_1608Metric | D1, D4, D7, D8 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2, H3, H4 |
| 2 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C21, C23 |
| 2 | 100n | Capacitor_SMD:C_0603_1608Metric | C24, C27 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R2, R3 |
| 2 | 10p | Capacitor_SMD:C_0402_1005Metric | C2, C7 |
| 2 | 10u | Capacitor_SMD:C_0603_1608Metric | C14, C18 |
| 2 | 15p | Capacitor_SMD:C_0402_1005Metric | C1, C4 |
| 2 | 1u | Capacitor_SMD:C_0402_1005Metric | C16, C19 |
| 2 | 22uF/16V | Capacitor_SMD:C_0603_1608Metric | C20, C22 |
| 2 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C25, C26 |
| 2 | Ai-Thinker-Ra-02 | RF_Module:Ai-Thinker-Ra-01-LoRa | U3, U4 |
| 2 | USB_B_Micro | Connector_USB:USB_Micro-B_Wuerth_629105150521 | J1, J2 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric | C15 |
| 1 | 120R | Inductor_SMD:L_0603_1608Metric | FB1 |
| 1 | 16MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y2 |
| 1 | 2.2uF | Capacitor_SMD:C_0402_1005Metric | C6 |
| 1 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C8 |
| 1 | 22k1 | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 32.768KHz | Crystal:Crystal_SMD_2012-2Pin_2.0x1.2mm | Y1 |
| 1 | 4.7u | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 47k5 | Resistor_SMD:R_0603_1608Metric | R12 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | CP2102N-Axx-xQFN24 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U5 |
| 1 | Conn_01x08_Male | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J4 |
| 1 | DIODE | Diode_SMD:D_0603_1608Metric | D5 |
| 1 | LOGO | LOGO | G*** |
| 1 | Micro_SD_Card_Det | Connector_Card:microSD_HC_Hirose_DM3D-SF | J3 |
| 1 | R | Resistor_SMD:R_0402_1005Metric | 1k1 |
| 1 | SP0502BAHT | Package_TO_SOT_SMD:SOT-23 | D6 |
| 1 | SP0503BAHT | Package_TO_SOT_SMD:SOT-143 | D3 |
| 1 | SP0504BAHT | Package_TO_SOT_SMD:SOT-23-5 | D2 |
| 1 | STM32H743VIT6 | Package_QFP:LQFP-100_14x14mm_P0.5mm | U1 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW2 |
| 1 | SW_SPDT | Button_Switch_THT:SW_E-Switch_EG1224_SPDT_Angled | SW1 |
More from tafiti-org/Subsytems
1- 4 layers90.2 × 96 mm

Similar boards
- 2 layers54 × 54 mm

Steppers
eddyem/mmpp
MMPP (Multimode photometer-polarimeter) for the telescope Zeiss-1000 of SAO RAS.
55 partsGPL-3.0 - 4 layers85 × 50 mm

OpenHap
kenyattaejones32-boop/AQM
Open-source hardware design for OpenHAP, an ESP32-based air quality monitor with CO sensing, thermistor temperature input, USB-C charging, and cellular data upload.
269 parts - 4 layers100 × 150 mm

- 4 layers75 × 38.6 mm

HuffAndPuff
dmanla/AccessibilityHeadsetDevkit
A development kit for the creation of an accessibility driven platform.
149 parts - 2 layers107.7 × 49.8 mm

- 2 layers100 × 84 mm

MIxer SPDIF V1.0
DADDesign-Projects/Asynchronous-SPDIF-Mixer
"Asynchronous SPDIF Mixer" synchronizes and mixes up to three asynchronous S/PDIF streams into a 48 kHz output. Running on an STM32H743 and developed in C++ with CubeIDE, it compensates for drift with interpolation.
141 parts13MIT - 4 layers125 × 95 mm

Atc roip gateway
ajisrawi/atc-roip-gateway
Airborne Radio-over-IP (RoIP) gateway bridging aircraft VHF COM + HF transceivers to an IP network (Starlink) with an ED-137-style RTP/PTT/COR stream. KiCad hardware, routed 4-layer PCB, STM32H743 firmware.
104 parts1 - 4 layers60 × 30 mm

Tpm phantom
jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack
9 parts2
Questions
How big is the Tafiti Ground Comms PCB?
It measures 64.5 × 73.6 mm and has 4 copper layers, 1.61 mm thick.
What parts does the Tafiti Ground Comms use?
69 parts, built around the STM32H743VIT6, AMS1117-3.3, SP0502BAHTG and SP0503BAHTG. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Tafiti Ground Comms KiCad files?
From the tafiti-org/Subsytems repository on GitHub, at the commit this page was made from: the board is COMMS/Ground Terminal/Tafiti Ground Comms/Tafiti Ground Comms.kicad_pcb and its schematic COMMS/Ground Terminal/Tafiti Ground Comms/Tafiti Ground Comms.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Tafiti Ground Comms design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).