2 layers98 × 88 mm
4 layers45 × 75 mm
Nosecone
Froneusz/design-PCBs- Size
- 45 × 75 mm
- Copper layers
- 4
- Thickness
- 1.67 mm
- Parts
- 130
- Nets
- 119
- Pads
- 454
- Tracks, vias
- 977, 165
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 31 Jul 2025
- Updated
- 31 Jul 2025
Overview
Nosecone is an open-source printed circuit board by Froneusz, from the Froneusz/design-PCBs repository on GitHub. It is a 4-layer board of 45 × 75 mm with 130 parts on 119 nets, routed with 977 tracks and 165 vias.
It is built around the CP2102N-A01-GQFN24, ESP32-S3-WROOM-1-N8 and SAM-M10Q-00B, with the BMM350, TPS613222ADBV and BMI088 among its other parts. Its parts include 44 resistors, 40 capacitors, 13 ICs, 10 diodes and 5 transistors. It belongs with the ESP32 boards of this library.
Main components
12
CP2102N-A01-GQFN24
QFN-24-EP(4x4)3Mbps 3V~3.6V Transceiver QFN-24-EP(4x4) USB Converters ROHSSilicon LabsUSB Converters
ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
SAM-M10Q-00B
LGA-20Hot start acceleration LGA-20 GNSS Modules ROHSu-bloxGNSS Modules
BMM350
WLCSP-9(1.3x1.3)-40℃~+85℃ 1.72V~1.98V 200uA I2C、SPI ±2mT ±2mT、- WLCSP-9(1.3x1.3) 3D Magnetic Sensors ROHSBosch SensortecSpecialized Sensors
TPS613222ADBV
SOT-23-5-40℃~+125℃@(TJ) 1 1.6MHz 5V 6.5uA 900mV~5.5V Boost Boost Built-in Fixed Yes SOT-23-5 DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
BMI088
LGA-16(3x4.5)-40℃~+85℃ Accelerometer Gyroscope LGA-16(3x4.5) Accelerometers ROHSBosch SensortecAccelerometers
MPRLS0025PA00002A
-UncategorisedHoneywell
TPS2113ADRBR
SON-8(3x3)-40℃~+125℃ 2.8V~5.5V 2A 84mΩ Soft-start、Under-voltage lockout、Integrated charge pump、Overcurrent Protection、Over temperature protection、Reverse current blocking SON-8(3x3) Power Distribution Switches ROHSTexas InstrumentsAC-DC Controllers And RegulatorsXB5353A
SOT-23-5-40℃~+85℃ 1 1.5uA 2.4V 2V~6V 4.3V Lithium Battery Protection IC Support SOT-23-5 Battery Management ROHSXySemiBattery Management
1N4148W
SOD-123150mA 1A 1V@50mA 1uA@75V 400mW 4ns 75V Independent SOD-123 Switching Diodes ROHSSTMicroelectronicsSwitching Diodes
SK6812MINI-E
SMD-40℃~+85℃ 0.6mA 1.78mm 120mcd~240mcd 120° 160mcd~320mcd 1kHz 2.8mm 2000V 3.2mm 3.7V~5.5V 460nm~470nm 515nm~525nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Semi-transparent lens SMD RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)DS04-254-1L-01BK
插件,P=2.54mm-40℃~+85℃ 1 2.54mm 24V 25mA SPST 插件,P=2.54mm DIP Switches ROHSCUIDIP Switches
Parts
130| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 100nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C2, C3, C11, C13, C14, C17, C19, C20, C21, C22, C25, C28, C29, C30, C32 +8 |
| 17 | 10K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R5, R6, R10, R11, R18, R19, R23, R24, R28, R29, R31, R33, R35, R37, R38, R42 +1 |
| 9 | 4.7uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C12, C15, C18, C23, C24, C27, C31, C33, C35 |
| 6 | 1K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R4, R16, R20, R27, R43, R44 |
| 4 | 10uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C7, C36, C37, C39 |
| 4 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D4, D5, D6, D11 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965 | H1, H2, H3, H4 |
| 3 | 100R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R12, R32, R45 |
| 3 | Jumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3, JP4, JP5 |
| 2 | 1N4148W | Diode_SMD:D_SOD-123 | D9, D10 |
| 2 | 2.2uF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C16, C26 |
| 2 | 330R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R34, R36 |
| 2 | 33K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R13, R46 |
| 2 | Conn_01x02 | PUT_RocketLab_other:Power_supply_2_PAD | J4, J6 |
| 2 | Q_NMOS_GSD | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q3, Q7 |
| 2 | Q_NPN_BCE | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1, Q2 |
| 2 | SK6812MINI | LED_SMD:LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D7, D8 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2 |
| 2 | TLV75901PDRVT | PUT_RocketLab_IC:TLV75901PDRVT | U4, U8 |
| 1 | 1.2K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R8 |
| 1 | 100K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R17 |
| 1 | 10K(NC) | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3 |
| 1 | 10nF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C10 |
| 1 | 11K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R40 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R14 |
| 1 | 22.1K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1 |
| 1 | 249K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R15 |
| 1 | 25K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R39 |
| 1 | 2K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R21 |
| 1 | 33R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R41 |
| 1 | 4.7K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R47 |
| 1 | 47.5K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2 |
| 1 | 50K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R22 |
| 1 | 560R | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R7 |
| 1 | BMI088 | PUT_RocketLab_IC:PQFN50P450X300X100-16N | IC3 |
| 1 | BMM350 | PUT_RocketLab_other:BGA9C40P3X3_128X128X54 | IC2 |
| 1 | Buzzer | PUTRocketLab_other:CMT32265SMTTR | BZ1 |
| 1 | CP2102N-A01-GQFN24 | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U1 |
| 1 | DS04-254-1L-01BK | PUT_RocketLab_other:SW_DS04-254-1L-01BK | SW1 |
| 1 | ESD441DPLR | Diode_SMD:D_0201_0603Metric_Pad0.64x0.40mm_HandSolder | D2 |
| 1 | ESP32-S3-WROOM-1 | PUT_RocketLab_IC:ESP32-S3-WROOM-1 | U2 |
| 1 | HSCMRRD100PDSA3 | PUT_RocketLab_IC:HSCMRRD100PDSA3 | IC1 |
| 1 | IRF7404 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | Q4 |
| 1 | JST_GHR | PUT_RocketLab_IC:JST_SM04B-GHS-TB(LF)(SN)- | J5 |
| 1 | LQH32PN2R2NN0L | Footprints:LQH32CH100K53L | L1 |
| 1 | MCP73831-5-OT | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | MPRLS0025PA00002A | PUT_RocketLab_IC:MPRLS0025PA00001A | U6 |
| 1 | SAM-M10Q-00B | PUT_RocketLab_other:SAMM10Q00B | ANT2 |
| 1 | SP0502BAHT | Package_TO_SOT_SMD:SOT-23 | D1 |
| 1 | TPS2113ADRBR | PUT_RocketLab_IC:SON65P300X300X100-9N-D | IC4 |
| 1 | TPS613222ADBV | Package_TO_SOT_SMD:SOT-23-5 | U5 |
| 1 | USB4105-GF-A | PUT_RocketLab_other:GCT_USB4105-GF-A | J1 |
| 1 | XB5353A | Package_TO_SOT_SMD:SOT-23-5 | U7 |
| 1 | XTSD02G | PUT_RocketLab_IC:Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering | U9 |
The 129 most common of 130 parts.
More from Froneusz/design-PCBs
2- 2 layers61.2 × 45.2 mm
Similar boards
- 2 layers24 × 42 mm
Basalt pcb
oc-ece-mesa/mesa-basalt
A cost-effective and easy to assemble STM32C071 based devboard
16 parts - 4 layers60 × 90 mm
- 2 layers36 × 23 mm
Zigbee toy
cristianchelu/oddware
Personal collection of projects that don't deserve their own repositories.
73 parts2AGPL-3.0 - 2 layers64 × 37 mm
Before silk
mitra42/frugal-iot-hw-sensor
A simple, un-opinionated, multi-purpose sensor board, that can be wired to sensors using most common interfaces (I2C, ModBus, OneWire, Analog) with onboard charging and external antenna.
67 parts - 8 layers100.2 × 55 mm
Jetson nano baseboard
antmicro/jetson-nano-baseboard
Antmicro's open hardware baseboard for the NVIDIA Jetson Nano, TX2 NX and Xavier NX
391 parts548Apache-2.0 - 8 layers78 × 55 mm
Jetson AI Cam CopperPilot
CopperPilot/Jetson-AI-Cam-CopperPilot
A carrier for Jetson Nano, Xavier NX and TX2 NX with two IMX219 cameras on a 39 mm stereo baseline, dual 4K outputs and CAN.
305 parts15 - 4 layers150 × 50 mm
Ict baseboard
antmicro/ict-baseboard
PCB design for implementing In-Circuit Testing of other PCBs via an USB-enabled host
277 parts4Apache-2.0 - 4 layers60 × 50 mm
Receiver effects
JMET04/aicad-agent
Deterministic CAD/EDA agent plugin for 2D drawings, AutoCAD, SolidWorks, KiCad, review gates and auditable delivery.
46 parts1MIT
Questions
How big is the Nosecone PCB?
It measures 45 × 75 mm and has 4 copper layers, 1.67 mm thick.
What parts does the Nosecone use?
130 parts, built around the CP2102N-A01-GQFN24, ESP32-S3-WROOM-1-N8, SAM-M10Q-00B and BMM350. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Nosecone KiCad files?
From the Froneusz/design-PCBs repository on GitHub, at the commit this page was made from: the board is Nosecone/Nosecone.kicad_pcb and its schematic Nosecone/LDO,Charger.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Nosecone design in my own project?
Its repository states no licence, so its author keeps all rights: ask Froneusz before reusing the design.