Skip to the content
2 layers107.5 × 60 mmLoeterli board, the printed circuit board in 3D

Loeterli board

hanneskiene/loeterli8

Soldering Iron Controller - It is Very Good

Size
107.5 × 60 mm
Copper layers
2
Thickness
1.6 mm
Parts
96
Nets
92
Pads
385
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 5 (file 20171130)
Created
22 May 2020
Updated
8 Jun 2020

Overview

Loeterli board is an open-source printed circuit board by hanneskiene, from the hanneskiene/loeterli repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 107.5 × 60 mm with 96 parts on 92 nets.

It is built around the R-78HB3.3-0.5, AD8227ARZ and DA56-11EWA, with the VOM1271T, FSV12100V and PSMN5R2-60YLX among its other parts. Its parts include 42 resistors, 24 capacitors, 9 diodes, 6 ICs and 4 connectors. It belongs with the STM32 boards of this library.

Main components

8

README

README.md

Parts needed

  • Board
  • JBC t245 handpiece
  • Transformer 12-24V 50-120VA

TODO

  • Handle holder in pcb?
  • Zero Cross Detection
  • Termocouple Instrumentation Amp Layout
  • Overcurrent Detection with shunt
  • Connector for external sleep input + sleep in middle stand
  • FUSE to earth

Parts

96
QtyValueFootprintReferences
16CCapacitor_SMD:C_0603_1608MetricC4, C5, C6, C7, C8, C9, C10, C16, C17, C18, C19, C20, C21, C22, C23, C24
15RResistor_SMD:R_0603_1608MetricR2, R6, R30, R31, R32, R33, R34, R35, R36, R37, R38, R39, R40, R41, R42
14680RResistor_SMD:R_0603_1608MetricR16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27, R28, R29
5CCapacitor_SMD:C_1206_3216MetricC1, C2, C11, C12, C13
5FSV12100VPackage_TO_SOT_SMD:TO-277AD3, D4, D5, D6, D7
4100RResistor_SMD:R_0603_1608MetricR3, R12, R13, R14
4100kResistor_SMD:R_1206_3216MetricR4, R7, R8, R9
4MountingHole_PadMountingHole:MountingHole_3.2mm_M3_Pad_ViaH1, H2, H3, H4
3CP1Capacitor_THT:CP_Radial_D10.0mm_P5.00mm_P7.50mmC3, C14, C15
3SW_PushButton_Switch_THT:SW_PUSH_6mm_H7.3mmSW2, SW3, SW4
21kResistor_SMD:R_0603_1608MetricR10, R11
2845RResistor_SMD:R_0603_1608MetricR5, R15
2AD8227Package_SO:MSOP-8_3x3mm_P0.65mmU4, U6
2LEDLED_THT:LED_D4.0mmD8, D9
1Conn_01x01loeterli:handpiece-holderJ2
1Conn_01x04Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ3
1DDiode_SMD:D_0603_1608MetricD10
1DA56-11EWADisplay_7Segment:DA56-11SURKWAU5
1FuseFuse:Fuse_1206_3216MetricF2
1FuseFuse:Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_OpenF1
1PSMN5R2-60YLPackage_TO_SOT_SMD:LFPAK56Q1
1RResistor_SMD:R_1206_3216MetricR1
1R-78HB3.3-0.5Converter_DCDC:Converter_DCDC_RECOM_R-78HB-0.5_THTU3
1RPC1-12RB-6Ploeterli:RPC1-12RB-6PJ1
1SP0502BAHTPackage_TO_SOT_SMD:SOT-23D1
1STM32F103C8TxPackage_QFP:LQFP-48_7x7mm_P0.5mmU2
1SW_PushButton_Switch_THT:SW_PUSH_6mm_H4.3mmSW1
1Screw_Terminal_01x03TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_HorizontalJ5
1VOM1271TPackage_SO:SOP-4_3.8x4.1mm_P2.54mmU1

Similar boards

  • 2 layersLed strip controller esp8266, the printed circuit board in 3D

    Led strip controller esp8266

    rschaeuble/led-strip-controller

    An LED strip controller driving up to three independent LED strips. Controllable via WiFi + MQTT.

    24 parts2MIT
  • 2 layers95.4 × 30 mmIOController, the printed circuit board in 3D

    IOController

    Envious-Data/EnvOpenTorch

    An open source USB rechargable LED Torch

    40 parts1GPL-3.0
  • 2 layers50.8 × 76.2 mm7seg led, the printed circuit board in 3D

    7seg led

    7m4gmh/7seg-panel

    server and utilities for 7-segment LED display panel

    15 parts
  • 2 layers181.2 × 123.2 mmEve PCB Project, the printed circuit board in 3D

    Eve PCB Project

    eve-Vhx/Charging-Leads-Breaker

    PCB design and code for I2C-controlled circuit breaker

    689 parts
  • 2 layers100 × 125 mmDSP Regulator RevC, the printed circuit board in 3D

    DSP Regulator RevC

    Phil-CIA/Development-Station-Power-Supply

    3 channel bench supply with current and voltage plotting

    235 parts
  • 2 layersFairy in a bottole, the printed circuit board in 3D

    Fairy in a bottole

    Richard42Graham/Fairy-in-a-bottle

    Some cool fairy lighting in a bottole.

    49 parts
  • 2 layers61 × 41.3 mmDaqBoard, the printed circuit board in 3D

    DaqBoard

    uvmaero/AERO_Boards

    All the Boards We Make

    26 parts1

Questions

How big is the Loeterli board PCB?

It measures 107.5 × 60 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Loeterli board use?

96 parts, built around the R-78HB3.3-0.5, AD8227ARZ, DA56-11EWA and VOM1271T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Loeterli board KiCad files?

From the hanneskiene/loeterli repository on GitHub, at the commit this page was made from: the board is 01-loeterli-board/loeterli-board/loeterli-board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Loeterli board design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).