
EinkPDA keyboard
TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.
Boards in 36 GitHub repositories, designed in KiCad, that use the KT-0805Y by Hubei KENTO Elec (-40℃~+85℃ 1.8V~2.4V 120° 175mcd 40mW 584nm~594nm 596nm Discrete Diode Water Clear Yellow 0805 LED Indication - Discrete ROHS). See how each wires it, with its parts, size, README and files; the KT-0805Y’s symbol, footprint and pinout are on its own page.

TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.

demik/quack
Bluetooth and ADB Mouse Converter for Macintosh 128/512/Plus, Apple Lisa and Apple IIc

geezacoleman/owl-driver-board
Development of a board that receives GPIO input and allows on/off control of connected solenoids.



Janky-Jingle-Crew/SouthPoleLevitator
2025 Christmas card "South Pole Levitator"


igorilla666/water-controller
Scheda di controllo basata sul modulo Waveshare ESP32-S3-ETH, con ingressi sensore, RS-485, pilotaggio rele, buzzer e alimentazione/protezioni dedicate.


NCSU-High-Powered-Rocketry-Club/FIRM-KiCad
Full and open hardware design for FIRM


Robast-GmbH/PCB_Designs
This repository contains all the necessary files and instructions for the PCBs that are designed using KiCad. Here is an overview of the main components: - .github: Contains Github-specific configurations, including…



butchja/esphome-jk-bms-can-PCB
HW platform for https://github.com/Ackmaniac/esphome-jk-bms-can




frindaddy/digichiver
Archival hardware/firmware for the MM54104 Digitalker chip

gallicchio/AMOD-and-RFMOD
The tutorial's 2x12 adapter (/mudd/133electronics/icepi-zero-dac-adc/adapterboard/) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod…

Gamecard/k2-plus-cm5
K2 Plus CM5 – Creality K2 Plus mit Upstream-Klipper auf einem Raspberry Pi CM5

P-Shreyas543/BatteryPack_16S_A4_Breakout
KiCad 10 project for a 14S (58.8 V max, 50.4 V nominal) 18650 battery pack on a 297 × 210 mm (A4) 4-layer PCB, built as a BMS breakout and training board.


sedlak477/owl-hardware
Hardware design files and build instructions for the OWL platform